Now Available!
PLEASE NOTE: Requires Homeseer version 3.0.0.451 or higher
This utility allows you display and search for settings/values for all virtual devices on your Homeseer setup.
Device selection is made by a series of drop-down menus/filters including By Room, By Floor, By Device, By Other, By Name or By Reference number. There is also a search string text box where searched text is highlighted on the page for easy identification. The display can be further sorted with various ordering methods.
Filtering 'By Other' includes:
» Additional Display Data (True)
» CAPI Control Data (True)
» Confirm Voice Command (False)
» Confirm Voice Command (True)
» Invalid Device (True)
» Hide Device From Mobile Views (False)
» Hide Device From Mobile Views (True)
» Hide Device From Views (False)
» Hide Device From Views (True)
» Include In Power Fail (False)
» Include In Power Fail (True)
» Is Dimmable (False)
» Is Dimmable (True)
» Is Light (False)
» Is Light (True)
» MyHS Device Change Notify (False)
» MyHS Device Change Notify (True)
» Linked Device (False)
» Linked Device (True)
» No Last Change Date/Time Update (False)
» No Last Change Date/Time Update (True)
» Do Not Log Commands (False)
» Do Not Log Commands (True)
» PED Named Data (False)
» PED Named Data (True)
» PED Unnamed Data (True)
» PED Unnamed Data (True)
» Relationship Status Child (True)
» Relationship Status Indeterminate (True)
» Relationship Status Not Set (True)
» Relationship Status Parent (True)
» Relationship Status Standalone (True)
» Script Button Data (False)
» Script Button Data (True)
» Supports Status (False)
» Supports Status (True)
» Use Pop-up Dialogue For Control (False)
» Use Pop-up Dialogue for Control (True)
» Usernote (False)
» Usernote (True)
» Voice Command (False)
» Voice Command (True)
» Voice Command Text (False)
» Voice Command Text (True)
» Voice Command (True) & Voice Command Text (False)
» Voice Command (False) & Voice Command Text (True)
» Voice Command (True) & Voice Command Text (True)
» User Access by Any
» User Access by <user 1>
» User Access by <user 2> etc
Devices are either shown in a list view (Basic, Normal or Advanced) or Device View (similar format to HS3 device management page) which shows the metrics similar to the basic mode list. There is also a control page to operate devices via device drop-down's
Advanced mode provides the most detail about a device including Plugin Extra Data (PED) which some plugin authors store information not normally seen.
Where available, the following metrics are displayed:
General:
» Name
» Floor
» Room
» Last Change
» Technology Address
» Technology Code
» Value
» Status
» String
» Usernote
» Invalid Device
» Status Image File
» String as HTML Code
» Thumbnail Image File
» Image File
Configuration Settings:
» Voice Command Text
» Support Status (Boolean)
» Is Dimmable (Boolean)
» Is Light (Boolean)
» Hide device from mobile views (Boolean)
» Hide device from views (Boolean)
» Voice Command (Boolean)
» Confirm Voice Command
» Include in power failure directory
» Use pop-up dialog for control
» No Last Change Date/Time Update
» User Access
» Linked Device
Advanced:
» MyHS Device Change Notify
» No Graphics Display
» No Status Display
» No Status Trigger
» Attention Icon Text
» Device Type (String)
» Device Type Internal (API)
» Device Type Internal (Type)
» Device Type Internal (SubType)
» Version
» Interface Instance
» Interface
» Scale Display Text
» Misc Settings
» Relationship Status Value
» Relationship Status
» Additional Display Data Count
» Additional Display Data
» Plugin Extra Data (PED) Named Count
» Plugin Extra Data (PED) Named Data
» Plugin Extra Data (PED) Unnamed Count
» Plugin Extra Data (PED) Unnamed Data
Status Text & Control
» Status Pairs Protected (Boolean)
» CAPI Control Count
» CAPI Control Data (Label, Value, Control Use, Control Type, Control Flag, Row, Column, Colspan)
» Script Button Count
» Script Button Data (Label, Script file, Sub or Function, Parameters, Row, Column, Colspan)
» Status Pair Count
» Status Text (Single Value) - Basic (Status, Value, Status-Control, Control Use)
» Status Text (Range) -Basic (Status, Value, Status-Control, Control Use
» Status Text (Single Value) - Advanced (Status, Value, Status-Control, Control Use, Prefix, Suffix, Decimal Places, Offset, Additional Data (Boolean), Has Scale (Boolean), Include Values (Boolean), Button Image, Button Image Type, Zero Padding (Boolean), Status Graphic File)
» Status Text (Range) - Advanced (Status, Value, Status-Control, Control Use, Range Start, Range Finish, Range Status Divisor, Prefix, Suffix, Decimal Places, Offset, Additional Data (Boolean), Has Scale (Boolean), Include Values (Boolean), Button Image, Button Image Type, Zero Padding (Boolean))
Key:
Shown in Basic Mode
Additionally shown in Normal Mode
Additionally shown in Advanced Mode
Reports in text format are available for any filter combination which is available from the web page or triggered by an event.
As always, you can download from my site (click on my banner below)
Please post any comments here.
The screen shots below show the outputs in Advanced and device view:
PLEASE NOTE: Requires Homeseer version 3.0.0.451 or higher
This utility allows you display and search for settings/values for all virtual devices on your Homeseer setup.
Device selection is made by a series of drop-down menus/filters including By Room, By Floor, By Device, By Other, By Name or By Reference number. There is also a search string text box where searched text is highlighted on the page for easy identification. The display can be further sorted with various ordering methods.
Filtering 'By Other' includes:
» Additional Display Data (True)
» CAPI Control Data (True)
» Confirm Voice Command (False)
» Confirm Voice Command (True)
» Invalid Device (True)
» Hide Device From Mobile Views (False)
» Hide Device From Mobile Views (True)
» Hide Device From Views (False)
» Hide Device From Views (True)
» Include In Power Fail (False)
» Include In Power Fail (True)
» Is Dimmable (False)
» Is Dimmable (True)
» Is Light (False)
» Is Light (True)
» MyHS Device Change Notify (False)
» MyHS Device Change Notify (True)
» Linked Device (False)
» Linked Device (True)
» No Last Change Date/Time Update (False)
» No Last Change Date/Time Update (True)
» Do Not Log Commands (False)
» Do Not Log Commands (True)
» PED Named Data (False)
» PED Named Data (True)
» PED Unnamed Data (True)
» PED Unnamed Data (True)
» Relationship Status Child (True)
» Relationship Status Indeterminate (True)
» Relationship Status Not Set (True)
» Relationship Status Parent (True)
» Relationship Status Standalone (True)
» Script Button Data (False)
» Script Button Data (True)
» Supports Status (False)
» Supports Status (True)
» Use Pop-up Dialogue For Control (False)
» Use Pop-up Dialogue for Control (True)
» Usernote (False)
» Usernote (True)
» Voice Command (False)
» Voice Command (True)
» Voice Command Text (False)
» Voice Command Text (True)
» Voice Command (True) & Voice Command Text (False)
» Voice Command (False) & Voice Command Text (True)
» Voice Command (True) & Voice Command Text (True)
» User Access by Any
» User Access by <user 1>
» User Access by <user 2> etc
Devices are either shown in a list view (Basic, Normal or Advanced) or Device View (similar format to HS3 device management page) which shows the metrics similar to the basic mode list. There is also a control page to operate devices via device drop-down's
Advanced mode provides the most detail about a device including Plugin Extra Data (PED) which some plugin authors store information not normally seen.
Where available, the following metrics are displayed:
General:
» Name
» Floor
» Room
» Last Change
» Technology Address
» Technology Code
» Value
» Status
» String
» Usernote
» Invalid Device
» Status Image File
» String as HTML Code
» Thumbnail Image File
» Image File
Configuration Settings:
» Voice Command Text
» Support Status (Boolean)
» Is Dimmable (Boolean)
» Is Light (Boolean)
» Hide device from mobile views (Boolean)
» Hide device from views (Boolean)
» Voice Command (Boolean)
» Confirm Voice Command
» Include in power failure directory
» Use pop-up dialog for control
» No Last Change Date/Time Update
» User Access
» Linked Device
Advanced:
» MyHS Device Change Notify
» No Graphics Display
» No Status Display
» No Status Trigger
» Attention Icon Text
» Device Type (String)
» Device Type Internal (API)
» Device Type Internal (Type)
» Device Type Internal (SubType)
» Version
» Interface Instance
» Interface
» Scale Display Text
» Misc Settings
» Relationship Status Value
» Relationship Status
» Additional Display Data Count
» Additional Display Data
» Plugin Extra Data (PED) Named Count
» Plugin Extra Data (PED) Named Data
» Plugin Extra Data (PED) Unnamed Count
» Plugin Extra Data (PED) Unnamed Data
Status Text & Control
» Status Pairs Protected (Boolean)
» CAPI Control Count
» CAPI Control Data (Label, Value, Control Use, Control Type, Control Flag, Row, Column, Colspan)
» Script Button Count
» Script Button Data (Label, Script file, Sub or Function, Parameters, Row, Column, Colspan)
» Status Pair Count
» Status Text (Single Value) - Basic (Status, Value, Status-Control, Control Use)
» Status Text (Range) -Basic (Status, Value, Status-Control, Control Use
» Status Text (Single Value) - Advanced (Status, Value, Status-Control, Control Use, Prefix, Suffix, Decimal Places, Offset, Additional Data (Boolean), Has Scale (Boolean), Include Values (Boolean), Button Image, Button Image Type, Zero Padding (Boolean), Status Graphic File)
» Status Text (Range) - Advanced (Status, Value, Status-Control, Control Use, Range Start, Range Finish, Range Status Divisor, Prefix, Suffix, Decimal Places, Offset, Additional Data (Boolean), Has Scale (Boolean), Include Values (Boolean), Button Image, Button Image Type, Zero Padding (Boolean))
Key:
Shown in Basic Mode
Additionally shown in Normal Mode
Additionally shown in Advanced Mode
Reports in text format are available for any filter combination which is available from the web page or triggered by an event.
As always, you can download from my site (click on my banner below)
Please post any comments here.
The screen shots below show the outputs in Advanced and device view:
Comment