Announcement

Collapse
No announcement yet.

jon00 motherboard & hard drive monitor discussion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Thanks Jon

    I am finally getting the info in the log. But I would like to ask you, why is it that I have a -128 on temp3 and no info on fan2 and 3? Also which is the best method of how to determine which which fan belongs to whom? please see attch.
    Last edited by Rotech; April 28, 2008, 04:19 PM.
    Hector
    ____________________________________
    Win.2003 OS, HS3
    BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
    BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
    MyTrigger,ACRF2,W800,Zwave
    AP800,Honeywell Stat

    Comment


      #47
      Hector,

      Speedfan can only provide data from the hardware connected and the interface provided by the PC's motherboard. I have no idea what you have.

      You may for example have a case fan but it is not connected to the motherboard with a speed sensor etc.

      Looking at your data you should disable logging for the following as they do not provide meaningful information:

      Temp3
      Fan2
      Fan3
      Fan4
      -12V
      -5V

      Once this is done, delete all .CSV files and allow speedfan to regenerate a new one.

      I would guess that Temp1 is your case temperature and Temp2 is your CPU temperature.
      Jon

      Comment


        #48
        Hello jon

        I went to try to run the event and Iam getting this. what am I doing wrong?
        Last edited by Rotech; April 28, 2008, 04:19 PM.
        Hector
        ____________________________________
        Win.2003 OS, HS3
        BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
        BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
        MyTrigger,ACRF2,W800,Zwave
        AP800,Honeywell Stat

        Comment


          #49
          The HS log shows the path as being in the HomeSeer directory, the file appears to be in the speedfan directory.
          -Rupp
          sigpic

          Comment


            #50
            Hector,

            Delete all .CSV files in the Speedfan directory and let it recreate a new one.
            Jon

            Comment


              #51
              Jon

              How long does it normaly take to make a CSV file? I deleted all the CSV file, this mornning but it still has not created one since.
              Hector
              ____________________________________
              Win.2003 OS, HS3
              BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
              BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
              MyTrigger,ACRF2,W800,Zwave
              AP800,Honeywell Stat

              Comment


                #52
                Check the setup... it creates them fast make sure you read Jon00`s documentation as it is step by step failsafe... if its not working then the chances are you have made an error in the install..

                TrOjAn

                Comment


                  #53
                  Yea, it seams that I forgot to enable the log and header part. So now I have icons on my status, but its seems that the voltages are not correct with the sensor name. Let me keep on reading.....
                  Hector
                  ____________________________________
                  Win.2003 OS, HS3
                  BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
                  BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
                  MyTrigger,ACRF2,W800,Zwave
                  AP800,Honeywell Stat

                  Comment


                    #54
                    Jon

                    I am having an issue, where I can not make show up the Vbat voltage.what it does is repeats the 12v supply. I attached the ini file, can you please take a look at it. the order of the log is:

                    temp1
                    temp2
                    hdo
                    fan1
                    vcore1
                    vcore2
                    3.3v
                    5v
                    12v
                    vbat
                    Last edited by Rotech; April 28, 2008, 04:19 PM.
                    Hector
                    ____________________________________
                    Win.2003 OS, HS3
                    BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
                    BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
                    MyTrigger,ACRF2,W800,Zwave
                    AP800,Honeywell Stat

                    Comment


                      #55
                      Hector,

                      Try the attached.

                      Please DELETE all virtual devices created by this script and allow it to re-create them once this ini file has been installed.
                      Attached Files
                      Jon

                      Comment


                        #56
                        Jon, that made a big diference, thank you very much. Jon I would to ask, what do you normaly put in for an action? I mean, in your setup what does your HS do when it reaches one of its preset.
                        Hector
                        ____________________________________
                        Win.2003 OS, HS3
                        BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
                        BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
                        MyTrigger,ACRF2,W800,Zwave
                        AP800,Honeywell Stat

                        Comment


                          #57
                          If any of the fan speeds goes low or any of the temperatures go too high, I have it send an email and also announce the problem.

                          I do nothing with the voltages and are just there for indication.
                          Jon

                          Comment


                            #58
                            thanks jon for your support.
                            Hector
                            ____________________________________
                            Win.2003 OS, HS3
                            BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
                            BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
                            MyTrigger,ACRF2,W800,Zwave
                            AP800,Honeywell Stat

                            Comment


                              #59
                              Jon

                              When one of the threshold reaches it trigger point, will this be logged in HS? Is there a test mode in the script to see if if everything is working as it should?
                              Hector
                              ____________________________________
                              Win.2003 OS, HS3
                              BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
                              BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
                              MyTrigger,ACRF2,W800,Zwave
                              AP800,Honeywell Stat

                              Comment


                                #60
                                Originally posted by Rotech View Post
                                Jon

                                When one of the threshold reaches it trigger point, will this be logged in HS? Is there a test mode in the script to see if if everything is working as it should?
                                Jon

                                any comments?
                                Hector
                                ____________________________________
                                Win.2003 OS, HS3
                                BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
                                BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
                                MyTrigger,ACRF2,W800,Zwave
                                AP800,Honeywell Stat

                                Comment

                                Working...
                                X