Announcement

Collapse
No announcement yet.

jon00 motherboard & hard drive monitor discussion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    The .ini doesnt contain any values behind "HighValueTrigger="

    Maybe I misunderstood you though, you meant the .ini not the .vbs?

    Comment


      Please copy your speedfan.ini file and post it here.
      Jon

      Comment


        Here it is:

        Code:
        [Settings]
        Speechtimeon="00:01"
        Speechtimeoff="00:02"
        SpeedfanLogPath="C:\Program Files (x86)\SpeedFan\"
        IconPath="\images\speedfan\"
        Mailfrom="speedfan@gmx.no"
        Mailto="espen@gmx.no"
        ComputerName="W2K8-R2 Server"
        HiLoReset=0
        SPClient="*:*"
        LogErrors=1
        
        [Update]
        Icon=Clock.gif
        DevCode=s1
        
        *****Saved settings only*****
        CurrentValue=06:57:20
        *****************************
        
        [Sensor1]
        Title="CPU TEMP"
        Unit=C
        DevCode=f2
        Icon=Temperature.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        HighValueTriggerEvent=
        LowValueTriggerEvent=
        Speakhigh="Warning. CPU temperature is high"
        Speaklow=
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=53,0
        HighValue=73,0
        LowValue=51,0
        HighValueTime=21:22:59
        HighValueDate=04.04.2010
        LowValueTime=05:20:30
        LowValueDate=05.04.2010
        HighValueResetFlag=0
        LowValueResetFlag=0
        SpeakCountHigh=1
        SpeakCountLow=1
        *****************************
        
        [Sensor2]
        Title="HDD Temperature"
        Unit=C
        DevCode=f3
        Icon=Temperature.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        HighValueTriggerEvent=
        LowValueTriggerEvent=
        Speakhigh="Warning. CPU temperature is high"
        Speaklow=
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=33,0
        HighValue=41,0
        LowValue=31,0
        HighValueTime=00:31:31
        HighValueDate=04.04.2010
        LowValueTime=05:10:30
        LowValueDate=05.04.2010
        HighValueResetFlag=0
        LowValueResetFlag=0
        SpeakCountHigh=1
        SpeakCountLow=1
        *****************************
        
        [Sensor3]
        Title="Core0 Temperature"
        Unit=C
        DevCode=f4
        Icon=Temperature.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        HighValueTriggerEvent=
        LowValueTriggerEvent=
        Speakhigh="Warning. Hard drive 0 temperature is high"
        Speaklow=
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=45,0
        HighValue=61,0
        LowValue=43,0
        HighValueTime=21:22:59
        HighValueDate=04.04.2010
        LowValueTime=04:40:30
        LowValueDate=05.04.2010
        HighValueResetFlag=0
        LowValueResetFlag=0
        SpeakCountHigh=1
        SpeakCountLow=1
        *****************************
        
        [Sensor4]
        Title="Core1 Temperature"
        Unit=C
        DevCode=f5
        Icon=Temperature.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        Speakhigh="Warning. Hard drive 1 temperature is high"
        Speaklow=
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=45,0
        HighValue=64,0
        LowValue=43,0
        HighValueTime=21:22:59
        HighValueDate=04.04.2010
        LowValueTime=04:40:30
        LowValueDate=05.04.2010
        HighValueResetFlag=0
        LowValueResetFlag=0
        SpeakCountHigh=1
        SpeakCountLow=1
        *****************************
        
        [Sensor5]
        Title="CPU Fan"
        Unit=RPM
        DevCode=f6
        Icon=fanon.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        Speakhigh=
        Speaklow="Warning. CPU fan speed is low"
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=1524
        HighValue=2296
        LowValue=1400
        HighValueTime=17:11:20
        HighValueDate=05.04.2010
        LowValueTime=13:09:20
        LowValueDate=05.04.2010
        HighValueResetFlag=
        LowValueResetFlag=0
        SpeakCountHigh=
        SpeakCountLow=1
        *****************************
        
        [Sensor6]
        Title="Chassis Fan"
        Unit=RPM
        DevCode=f7
        Icon=fanon.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        Speakhigh=" Warning. CPU core voltage too high"
        Speaklow="Warning. CPU core voltage too low"
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=1259
        HighValue=1266
        LowValue=1241
        HighValueTime=05:41:31
        HighValueDate=04.04.2010
        LowValueTime=00:24:10
        LowValueDate=04.04.2010
        HighValueResetFlag=0
        LowValueResetFlag=0
        SpeakCountHigh=1
        SpeakCountLow=1
        *****************************
        
        [Sensor7]
        Title="+12 Volt"
        Unit=Volts
        DevCode=f8
        Icon=Meter1.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        Speakhigh="Warning. 12 Volt supply too high"
        Speaklow="Warning. 12 V supply too low"
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=12,1
        HighValue=12,1
        LowValue=12,1
        HighValueTime=00:24:10
        HighValueDate=04.04.2010
        LowValueTime=00:24:10
        LowValueDate=04.04.2010
        HighValueResetFlag=0
        LowValueResetFlag=0
        SpeakCountHigh=1
        SpeakCountLow=1
        *****************************
        
        [Sensor8]
        Title="+5 Volt"
        Unit=Volts
        DevCode=f9
        Icon=Meter1.gif
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        Speakhigh="Warning. 3.3 Volt supply too high"
        Speaklow="Warning. 3.3 Volt supply too low"
        SpeakTimes=3
        ShowHighValueRecord=1
        ShowLowValueRecord=1
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0
        
        *****Saved settings only*****
        CurrentValue=5,08
        HighValue=5,08

        LowValue=5,08

        HighValueTime=00:24:10
        HighValueDate=04.04.2010
        LowValueTime=00:24:10
        LowValueDate=04.04.2010
        HighValueResetFlag=0
        LowValueResetFlag=0
        SpeakCountHigh=1
        SpeakCountLow=1
        *****************************


        [Blank]
        Title=""
        Unit=
        DevCode=
        Icon=
        HighValueTrigger=
        HighValueReset=
        LowValueTrigger=
        LowValueReset=
        Speakhigh=
        Speaklow=
        SpeakTimes=3
        ShowHighValueRecord=0
        ShowLowValueRecord=0
        RunScriptHigh=
        RunScriptLow=
        RunEventHigh=
        RunEventLow=
        SendEmail=0

        *****Saved settings only*****
        CurrentValue=
        HighValue=
        LowValue=
        HighValueTime=
        HighValueDate=
        LowValueTime=
        LowValueDate=
        HighValueResetFlag=
        LowValueResetFlag=
        SpeakCountHigh=
        SpeakCountLow=
        *****************************
        [/code]

        Comment


          That looks OK.

          Are you still getting the error as the tests I got you to do meant that the 3.1 value you saw must have come from the ini file?
          Jon

          Comment


            Jon, I dont really know what solved this, but now after recreating the .ini from the template in your zip file everything works great. Thanks for your effort to help me!

            But unfortunaely, i have another issue as well, you see i am also using another plugin (twittseer) that sends some device strings and device values to a twitter account.
            For instance, im sending DST:s1 and DV:f5

            Sometimes instead of the device string for s1 (wich is my powerconsumption) this is posted:
            "Winserver monitoring updated: 17:18:20"

            I found this in your vbe script:

            HTMLString &= "<td align='left' class='tablecellcustom'>" & ComputerName & " monitoring updated: " & TimeofDay & "</td>"

            Somehow it seems like this get inserted into my S1 device string, even thoug all my devices in the speedfan ini is Fx (x= 1 to 9 )

            Comment


              If you look at the ini file you posted, there is the following entry:

              [Update]
              Icon=Clock.gif
              DevCode=s1

              You need to change this to another code.
              Jon

              Comment


                Sorry, thats just me being sloppy.

                Comment


                  Hi Jon00,

                  I consistently get the following error, is there a setting i should be changing to get rid of it?

                  The device values and strings get updated, but this is always in the error log...

                  Code:
                  8/14/2012 10:13:50 AM  Jon00_Speedfan Error  at code block J System.InvalidCastException: Conversion from string  "38.0****************************" to type 'Single' is not valid. ---  System.FormatException: Input string was not in a correct format.   at  Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String  Value, NumberFormatInfo NumberFormat)   at  Microsoft.VisualBasic.CompilerServices.Conversions.ToSingle(String  Value, NumberFormatInfo NumberFormat)   --- End of inner exception stack  trace ---   at  Microsoft.VisualBasic.CompilerServices.Conversions.ToSingle(String  Value, NumberFormatInfo NumberFormat)   at  Microsoft.VisualBasic.CompilerServices.Conversions.ToSingle(String  Value)   at scriptcode3.scriptcode3.Main(Object parm)
                  HS3 PRO, Win10, WeatherXML, HSTouch, Pushover, UltraGCIR, Heaps of Jon00 Plugins, Just sold and about to move so very slim system.

                  Facebook | Twitter | Flickr | Google+ | Website | YouTube

                  Comment


                    It looks like your speedfan log has lots of * where there should just be numerical data.

                    Can you post your Speedfan log please.
                    Jon

                    Comment


                      Thanks for taking a look at this Jon00,
                      The log file looks quite normal from what i can see.
                      Attached Files
                      HS3 PRO, Win10, WeatherXML, HSTouch, Pushover, UltraGCIR, Heaps of Jon00 Plugins, Just sold and about to move so very slim system.

                      Facebook | Twitter | Flickr | Google+ | Website | YouTube

                      Comment


                        I cannot understand where the * characters are coming from!

                        This is probably a fudge but should stop the error.

                        Open up Speedfan.vb and search for the following line:

                        If Len(Sensordata)=0 then exit sub

                        Below this line add the following:

                        Sensordata=Sensordata.Replace("*","")

                        See if that helps.
                        Jon

                        Comment

                        Working...
                        X