Announcement

Collapse
No announcement yet.

Jon00 Weather Display For Homeseer 2 and 3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Yes it's the same with km/h, one decimal wrong.
    5.2 knots shows 96,3 km/hour (Storm). Should be 9,63 km/h
    This is when I set WindUnit="2"
    Edit: saw your answer now, agree that's strange.
    (Is its something with . or ,)

    From file: Jon00WeatherDisplayDataHS3.ini
    [Info]
    Version=1.0.4
    [ClientrawData]
    0=12345
    1=5.2
    2=5.2
    3=135
    4=7.0
    5=82

    Comment


      #32
      See my previous post.
      Jon

      Comment


        #33
        Yes, I checked my clientraw file and attached it
        It's still one decimal wrong
        (will also try with restart HS)
        Checked, won't help to restart HS
        Attached Files

        Comment


          #34
          The output of clientraw.txt is in knots and it looks like the Wind speed is 3.7 Knots from your file. This must be a WD issue if it is not providing the correct value?
          Jon

          Comment


            #35
            Found the problem. I edited clientraw.txt and when I was change 3.7 to 3,7 then it showed up correct. Think it's windows (8.1) settings for Swedish but I'm not shore.

            Comment


              #36
              I'll have to add an option to replace the . with , for international use. I'll see what I can do.
              Jon

              Comment


                #37
                It wouldn't help to change the regional settings for numbers from , to . I also restarted the Pc but it still one decimal wrong.

                Edit:Thanks so far for helping me out and hope that you been able to have time to change it for international use.
                (As you see I'm tried a work around but no go)
                Attached Files

                Comment


                  #38
                  I've sent you a special version to try.
                  Jon

                  Comment


                    #39
                    Hello
                    The last file you sent me don't work at all but the strange is that when I replaced the file again with the one you sent me first it starts to work.
                    I will report back tomorrow if it still works.

                    Comment


                      #40
                      Think that it is HS itself who not handle . and , right.
                      (your ini file is the first one you sent me)
                      Restarted HS and same problem as before.
                      Changed , to . in regional setting in control panel for win 8.1
                      Restarted HS and it works again.

                      Comment


                        #41
                        HS will use the regional settings for your country. Unfortunately WD only uses a . as the decimal separator regardless of region. I've corrected my error and sent you a new version. Put all your regional settings back as they were.
                        Jon

                        Comment


                          #42
                          Yes, works for now whit my regional settings and the latest file you sent me.
                          Thanks!

                          Comment


                            #43
                            Great. I'll post an updated version later this week.
                            Jon

                            Comment


                              #44
                              Version 1.0.4 for Homeseer 3 has now been released.

                              Changes:

                              Added m/sec as a wind speed metric
                              Internationalization issues resolved.
                              Jon

                              Comment


                                #45
                                Soil Moisture incorrect reading from Davis VP2

                                Hello Jon, forgive me if this is covered somewhere else. I've had a few months now trying to get Weather Display, your wonderful script, and HS3 working well together.

                                I seem to be having a problem with my soil moisture that displays. Currently it shows 392 in HomeSeer (on a scale I believe of 1-200). Looking at the Davis VantagePro 2 console it shows moisture of 200, WD shows 200, the 'Jon00WeatherDisplayDataHS3' file shows item # 157 to be 200, but the script shows 392. Any chance you could help me through adjusting that?

                                Also question about updating, I just made sure I was using your current version 1.0.4. When your script is updated like the recent one, should we just copy and replace the vben file?

                                For the device setup, in the 'Jon00WeatherDisplayHS3' file. Is there a way to add a text value behind the device value? For example, for fire weather value it might be nice to put a scale of 1-15 or whatever it is. OR, for moon phase it might be nice to add 'days' or 'percent'. Likewise for some of the soil, UV, daylight readings, etc.

                                Thanks for your help and the wonderful plugin.

                                Joel

                                Comment

                                Working...
                                X