ADIOcelot Plugin

[pbibm]

Cool. Thanks, I will set it up for tonight.

Thanks
Paul

[Michael McSharry]

I added a test button and debug messages when the operation is started and the actual sending of the data. It will occur at 1 AM local time or on the next minute when the Set Clock button is pressed. Untested V1.9.1

[pbibm]

Hey Michael-

It was 1:00 est, and it didnt change. I set my PC clock back early today, about 1/2 hour, and told cmax to set the ocelots time. I then set the PC's clock up to the normal time. I did shut down and restart homeseer after replacing the executable.

I waited until 1:03, checked, it was still the old time. Since you saw it working, I see 2 possiblities of what happened:

1) Wait and check tomorrow. It may not set local time, and I believe you're on pst. I don't think you would hard code pst, and that is not in the parameters being set, infact I dont think the Ocelot knows what time zone its in. I will check this, but I dont think this is it.

2) The executable you posted has an 11/4/03 date around 11 am. The version on the tab says 1.8.0. That information is consistent with property inspection of the new file too. I moved the old file completey out of the homeseer directory. That doesnt jibe with when you made the change. Maybe its not the new & improved one? I figured since this was an "in flight" fix, you might not have updated the version on the tab?

I will let you know what I find out tomorrow morning

Thanks again, Paul

[pbibm]

Excellent! Thank you! I willi give it a try and check back.

Thanks again, Michael

Paul

[Michael McSharry]

The example provided looks to be missing a digit of the year, yet the total message byte count including checksum was 51. I implemented 4 bytes for the year and left out one of the trailing zeros. It is scheduled to sync the clock every day at 1 AM.

Since the Ocelot does not have 1 second resolution I had to set a timer in the plugin to stuff the time at the top of the minute. This makes the operation asychronous to other activities.

I tested it as an xap node to the extent that the new code is executed and does not appear to break anything. I'll leave it to you to test if it functions as a HS Plugin and if the clock does get set. I can put a test button for testing if you think you need it to try the set clock more often than once a day.

[pbibm]

[Michael McSharry]

Can you point me to the message protocol for working with the ocelot clock?

[pbibm]

Michael-

I am not sure if you are asking for requirements at this time. Here is a "nice to have", don't know how hard it would be

Have the plugin sync the Ocelot's clock to the PC time at some interval. The interval could a value that the user provides, or preset. Mine doesnt wonder very far, once a month would be great for me.
For whatever its worth.

Paul

[Michael McSharry]

I have not tested it with the Alpha release, but I expect it to work. In my case I run it as an xap application and I know it will continue to work in that mode. I'm not aware of a new pricing structure for plugins that are currently less than $0.01. If there is a change I will go with the flow.

[BraveSirRobbin]

I do not expect there to be too many iterations of the ADIOcelot plugin, but I know there will be more than one so I'm starting this thread to make the most current version available prior to going the the Updater.

Michael this thread sparks a couple of questions. Is this plugin going to have to change for Homeseer 2.0? By making sure this plugin is offered now, will it be conforming to the new Homeseer pricing structure?

BTW: I really like this plugin and consider it one of my main HA tools!

Regards,

BSR

[Michael McSharry]

I do not expect there to be too many iterations of the ADIOcelot plugin, but I know there will be more than one so I'm starting this thread to make the most current version available prior to going the the Updater.

The alternate ocelot plugin (ADIOcelot) is based upon the code from V1.0.29 of HST hspi_ocelot.exe which is the configuration as of October 2003. It addresses five areas of the plugin:

1. Dynamic generation of variables and I/O points
2. Filter of unused variables and I/O from unnecessary procesing by homeseer
3. Remapping of IR modes to allow continuous definitions for an IR device
4. Dynamic Connect / Disconnect of Com Port to allow CMAX use
5. Synchronization of CMAX System map with Homeseer definitions


Future upgrades may occur based upon needs of the community. It is the intention to always maintain backward compatibilty with HST version of the ocelot plugin and to incorporate any future upgrades that may be made by HST.



Here is a log of what is changing



PR1 1.2.0 Com Port not recognized
PR2 1.2.0 Added PlayIREx method
PR3 1.2.1 Added Startup Trace Code
PR4 1.3.0 Added System Map / CMAX Support
PR5 1.3.1 CMAX started before comm port closed
PR6 1.3.2 Not able to receive X10
PR7 1.3.3 DefineHSIR Permission Denied Error
PR8 1.4.0 Add Script call before/after CMAX
PR9 1.5.0 IO points offset by 1 in hs devices
PR10 1.5.0 Add DeviceValue support to IO points
PR11 1.5.1 Call CMAX sync scripts when ocelot comm present
PR12 1.5.2 Only 1 SECUxx unit recognized as unique
PR13 1.6.1 Provide option to receive X10 xmit
PR14 1.6.1 Unreliable discrete input changes
PR15 1.6.1 Record SECU unit mappings for reference in settings.ini
PR16 1.6.10 SECU units after SECU16IR mismapped
PR17 1.6.10 IO Points handling shows delays
PR18 1.6.11 Remove Timing collection in virtual devices
PR18 1.6.12 Handle IR locations above 380
PR19 1.6.13 Bridge over house code "`" for variables
PR20 1.6.14 Transform relay on/off commands into value 0/1 commands
PR21 1.7.0 Allow input inversion to be specified on a per-module basis
PR22 1.7.1 Plugin acts upon output commands to other two-state plugins
PR23 1.8.5 Add support for multiple SECU16IR
PR24 1.9.4 Add support to sync the ocelot clock with the pc clock
PR25 1.9.5 Make interface property comparison case insensitive
PR26 1.9.5 Rly08 location carries point number rather than unit number
PR27 1.9.8 Sync Clock with command packing carrying seconds
PR28 1.9.9 Reporting of X10 traffic sometimes enabled on return from CMAX
PR29 1.9.11 RLY8 uses the upper rather than lower 8 points
PR30 1.10.0 HS2 Compatibility
PR31 1.11.0 Add PlayZoneIR(zone, name)
PR32 1.11.2 Check for duplicate IR names
----------- Above in Updater --------------
PR33 1.12.1 Added error traps in X10 int sequence
PR34 1.13.1 Added control to change .interface property from ADIOcelot to/from Applied Digital Ocelot
PR35 1.13.1 Added HS2 misc setting for callback on SetDeviceValue
PR36 1.13.2 Removed debug to log from Setio
------ above in updater -----------
PR37 1.13.5 Multistep operation during save, will not save configuration
------ above in updater -----------
PR38 1.14.3 Variable status not updated in HS2 builds after 2041
------ above in updater -----------
PR39 1.14.4 misc property upper bits set in NET conversion
PR40 1.14.10 remove "0 OR" from setting .misc property
PR41 1.14.11 remove reference to obsoleted .status property