Announcement

Collapse
No announcement yet.

Using Comm 8

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Using Comm 8

    Is there some restriction on how high of comm port can be used with the ADIOcelot plugin. I am using version 1.8.5. I enter comm port 8 in the setup and hit update but it won't connect to the Ocelot. I go back in to setup and it is set to use comm port 2. Comm port 8 is a virtual comm port using Lantronix Comm Port Redirector. I got this working for mcsTemp connecting to the Temp08 and now I am trying to get my Ocelot connect using the same method. I have saved my HS .xml file with this setting and restarted HS but it is still trying to connect using Comm port 2 and failing. My settings.ini file shows it is set to comm 8 but it still seems to be trying to use comm 2. I can use CMAX to connect to the Ocelot using comm port 8 through the redirector the Lantronix server on to the Ocelot. Here's a log snippet and a snippet from settings.ini in homeseer\config.
    Log
    Code:
    7/10/2005 8:15:44 PM~!~Info~!~HomeSeer version is: 1.7.7 
    7/10/2005 8:15:44 PM~!~startup~!~Loading configuration XML file
    7/10/2005 8:15:47 PM~!~startup~!~Restoring device status
    7/10/2005 8:15:48 PM~!~startup~!~Initializing text to speech
    7/10/2005 8:15:53 PM~!~Error~!~SAPI5 Init: Automation error
    Library not registered. 
    7/10/2005 8:15:54 PM~!~startup~!~Initializing Telephone Interface
    7/10/2005 8:15:56 PM~!~startup~!~Waiting for HomeSeer Phone to start up ...
    7/10/2005 8:16:13 PM~!~Speak~!~HomeSeer Phone is Ready
    7/10/2005 8:16:14 PM~!~startup~!~Initializing X10 Interface
    7/10/2005 8:16:14 PM~!~startup~!~Initializing Infrared Interface
    7/10/2005 8:16:15 PM~!~ADIOcelot~!~Version 1.8.5 Registered with FrmHSPI
    7/10/2005 8:16:17 PM~!~ADIOcelot~!~Using Comm Port 2
    7/10/2005 8:16:20 PM~!~ADIOcelot~!~Ocelot Plug-in Error, Timeout looking for CPU-XA/Ocelot
    7/10/2005 8:16:23 PM~!~ADIOcelot~!~Ocelot Plug-in Error, Timeout looking for CPU-XA/Ocelot
    7/10/2005 8:17:05 PM~!~Error~!~Initializing custom IR device: Timeout from CPU-XA/Ocelot
    Settings.ini
    Code:
    [hspi_ocelot]
    reg_moved=1
    base_var=92
    comport=8
    poll_interval=2000
    invert=1
    log_errors=0
    log_comms=0
    first_run=1
    showInMenu=1
    Recognition=1
    IncludeVariables=0
    IncludeIO=0
    IncludeIR=0
    IncludeX10=1
    IncludeMessages=0
    SyncMaster=0
    mappings=1!11!_!1,
    X10Xmit=0
    CMAXFile=C:\Program Files\ADI\ADICON2500\CPUXA.exe
    IRMAXFile=C:\Program Files\ADI\ADICON2500\IR_Max.exe
    RunAsXapNode=0

    #2
    I've used com 8 with ADIOcelot in the past. The port selection for the X10 interface is done via the HS interfaces page rather than the plugin settings page. I'm guessing you have not changed it from com 2 at that location.

    Comment

    Working...
    X