Announcement

Collapse
No announcement yet.

ADIOcelot configuration

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Rupp,

    I'm not using HS as a service.

    I disabled de Vista UAC on the 2nd day... Could not stand it anymore ;-)

    I'm using IE 7 32bits.

    Thank you,

    Comment


      #32
      Bump - Has anyone with this problem found a way to resolve it?

      Comment


        #33
        I used to have the same problem (see link below) when I started with HS2. I think that one of the updates (or HS reinstalls) fixed the problem.
        http://board.homeseer.com/showthread.php?t=115573

        Also make sure the Ocelot is properly configured in your interfaces. If HS can't see the Ocelot, the menu will not display.
        Of course you can't have MAX and Ocelot plugin (any of them) running at the same time as both of them will lock the COM port (not to mention running both plugins at the same time).

        Try to move Ocelot to different COM port, reinstall ADIOcelot and configure properly in the interfaces.

        I'm running HS Standard Edition 2.2.0.66 and it works fine.

        Marty

        Comment


          #34
          the same problem appeared; I am blocked; i can't get ADIOcelot Config from (Setup --Interfaces) and (the HomeSeer window)

          Comment


            #35
            is there any solution?

            Comment


              #36
              many of my plugins use the .ini file key inmenu=1 or inmenu=true to indicate if a plugin will appear in the hs menu where the log is shown. I think the .ini file for adiocelot is config\settings.ini. when hs is shutdown edit the file to put this key value in the file. Others that have access to hs can confirm this.

              Comment


                #37
                on my .ini i have " showInMenu=1" when I make " showInMenu=true" ADIOcelot disappear of the menu homeseer.

                Comment


                  #38
                  'When set to 1 you then have access via the menu pulldown to the plugin config form. The form will appear in the midle of the screen behind any other open windows. To se it do not hve other wndows showing in the midle.

                  Comment


                    #39
                    no it not appear; when i make Cntr+alt+supp "Adiocelt" appera in process; but i dont have his window.
                    i cant access to it with menu homesser and with Interfaces configuration.

                    Comment


                      #40
                      i have install author computer; the same problem appeared

                      Comment


                        #41
                        What happens when you you select ADIOcelot from the form where HS shows the log and then select the setup option under the pulldown presented from the menu?

                        Comment


                          #42
                          Try this:
                          Move the HS log window aside before you click the ADIOcelot.
                          In my system the window appears behind the LOG window and the LOG window becomes "frozen". I'm not sure why as this never happen to me before until I recently build a new machine with 2 cores AMD and clean new install. When I finish my ADIOcelot setup and click Update or Cancel, the LOG window is OK again. Note that HS keeps running even consider the LOG window is frozen. It's weird, but still works.

                          Comment


                            #43
                            in log i have:

                            22/09/2008 09:12:50 - Startup - Using system's regional settings
                            22/09/2008 09:12:51 - Startup - Loading Settings
                            22/09/2008 09:12:52 - Startup - Settings Loaded.
                            22/09/2008 09:12:52 - Startup - Loading configuration file ...
                            22/09/2008 09:12:54 - Info - Loading device types file...
                            22/09/2008 09:12:54 - Database - Opening up HomeSeer database C:\Program Files\HomeSeer 2\Config\elpacha_20080919.mdb
                            22/09/2008 09:12:59 - Database - HomeSeer configuration database C:\Program Files\HomeSeer 2\Config\elpacha_20080919.mdb has been closed.
                            22/09/2008 09:13:00 - Info - Loading Devices...
                            22/09/2008 09:13:04 - Load Config - 267 total devices loaded.
                            22/09/2008 09:13:04 - Load Config - Checking device type settings for all devices...
                            22/09/2008 09:13:05 - Load Config - Finished checking device type settings.
                            22/09/2008 09:13:05 - Load Config - Loading Events...
                            22/09/2008 09:13:05 - Load Config - 6 total events loaded.
                            22/09/2008 09:13:05 - Info - Loading TV Timers...
                            22/09/2008 09:13:05 - Info - HomeSeer version is: 2.2.0.66
                            22/09/2008 09:13:06 - Info - Initializing phone interface...
                            22/09/2008 09:13:06 - HSPhone - HomeSeer Phone Web Interface initializing.
                            22/09/2008 09:13:08 - Startup - Checking for available plug-ins
                            22/09/2008 09:13:09 - Info - Found plug-in: ADIOcelot, version: 1.14.0.3
                            22/09/2008 09:13:09 - Info - Found plug-in: LiteJet, version: 0.1.2406.27175
                            22/09/2008 09:13:10 - Info - Found plug-in: MLHSPlugin, version: 2.0.0.40
                            22/09/2008 09:13:10 - Startup - Restoring device status
                            22/09/2008 09:13:10 - Startup - Initializing Plug-Ins
                            22/09/2008 09:13:10 - Info - Initializing X10 Plug-in: ADIOcelot On COM Port 4
                            22/09/2008 09:13:10 - Info - Initializing Plug-in: ADIOcelot
                            22/09/2008 09:13:10 - Info - Finished initializing X10 interface ADIOcelot
                            22/09/2008 09:13:11 - Info - Initializing Infrared interface ADIOcelot on COM 4
                            22/09/2008 09:13:11 - Info - Finished initializing infrared interface ADIOcelot
                            22/09/2008 09:13:11 - Info - Initializing Plug-in: ADIOcelot
                            22/09/2008 09:13:11 - COM Plugin - Calling InitIO
                            22/09/2008 09:13:11 - Info - Finished initializing plug-in ADIOcelot
                            22/09/2008 09:13:11 - Info - Interface LiteJet is running as a trial, 9 days remaining.
                            22/09/2008 09:13:11 - Info - Initializing Plug-in: LiteJet on COM port 3
                            22/09/2008 09:13:12 - LiteJet - Processing configuration file: C:\Program Files\HomeSeer 2\Config\CL24_20080625.cl
                            22/09/2008 09:13:12 - LiteJet WARNING - RS-232 Notification is not turned on for all loads in the system.
                            22/09/2008 09:13:12 - LiteJet - Initializing LiteJet on COM port 3
                            22/09/2008 09:13:12 - LiteJet - Receive Thread Started...
                            22/09/2008 09:13:12 - LiteJet - Starting communications check...
                            22/09/2008 09:13:12 - Info - Finished initializing plug-in LiteJet
                            22/09/2008 09:13:12 - Info - Initializing Plug-in: MLHSPlugin
                            22/09/2008 09:13:12 - MLHSPlugin Info - MLHSPlugin - Krumpholz Enterprises (Version :2.0.0.40) - Private Consumer Licensed Version
                            22/09/2008 09:13:12 - MLHSPlugin Info - MLHSPlugin has detected HomeSeer version 2.2.0.66
                            22/09/2008 09:13:12 - MLHSPlugin Info - MLHSPlugin - initializing I/O...
                            22/09/2008 09:13:12 - MLHSPlugin MsgL - Loaded PermanentHSDevices from configuration file: ]56~]1~]32~]5~]36~]45~]44~]46~]31~]38~]47~]39~]48~]9~]3~]10~]4~]23~]6~]67~]34~]7~]78~]89~]12~]33~]52~]51~]53~]54~]2~]35~]8~]14~]20~]11~]13~]18~]19~]25~]97~]98~]99~\1~\2~\3~\4~\5~\6~\7~\8~\9~\10~\11~\12~\13~\14~\20~\31~\3 3~\34~\35~\36~\37~#1~#2~#11~#12~#13~$58~$59~$60~$61~$64~#14~ #15~#16~#17~#18~#19~#20~#3~#21~#22~#23~#24~#25~#26~#27~#28~# 29~#30~#4~#31~#32~#33~#34~#35~#36~#37~#38~#39~#40~#5~#41~#42 ~#43~#44~#45~#46~#47~#48~#49~#50~#6~#51~#52~#53~#54~#55~#56~ #57~#58~#59~#60~#7~#8~#9~$17~$18~$19~$20~$21~$22~$23~$24~$25 ~$26~#10~$27~$28~$29~$30~$31~$32~$33~$36~[1~[2~[3~[4~[5~[6~[7~[8~[9~[10~[11~[12~[13~[14~[15~[16
                            22/09/2008 09:13:12 - MLHSPlugin Info - Loading Configuration Successfully...
                            22/09/2008 09:13:12 - MLHSPlugin MsgL - Loading Configuration Successfully...
                            22/09/2008 09:13:12 - MLHSPlugin Info - ......configured to listen on TCP Port 2410
                            22/09/2008 09:13:12 - MLHSPlugin Info - ......will subscribe to HomeSeer device change notification for devices ]56~]1~]32~]5~]36~]45~]44~]46~]31~]38~]47~]39~]48~]9~]3~]10~]4~]23~]6~]67~]34~]7~]78~]89~]12~]33~]52~]51~]53~]54~]2~]35~]8~]14~]20~]11~]13~]18~]19~]25~]97~]98~]99~\1~\2~\3~\4~\5~\6~\7~\8~\9~\10~\11~\12~\13~\14~\20~\31~\3 3~\34~\35~\36~\37~#1~#2~#11~#12~#13~$58~$59~$60~$61~$64~#14~ #15~#16~#17~#18~#19~#20~#3~#21~#22~#23~#24~#25~#26~#27~#28~# 29~#30~#4~#31~#32~#33~#34~#35~#36~#37~#38~#39~#40~#5~#41~#42 ~#43~#44~#45~#46~#47~#48~#49~#50~#6~#51~#52~#53~#54~#55~#56~ #57~#58~#59~#60~#7~#8~#9~$17~$18~$19~$20~$21~$22~$23~$24~$25 ~$26~#10~$27~$28~$29~$30~$31~$32~$33~$36~[1~[2~[3~[4~[5~[6~[7~[8~[9~[10~[11~[12~[13~[14~[15~[16
                            22/09/2008 09:13:12 - MLHSPlugin Info - ......MLHSPlugin is enabled.
                            22/09/2008 09:13:12 - MLHSPlugin MsgL - Waiting for connection from MLServer MLHSPlugin on TCP Port 2410
                            22/09/2008 09:13:13 - MLHSPlugin MsgL - HomeSeer System Uptime : 0 Days 0 Hours 0 Minutes 4 Seconds
                            22/09/2008 09:13:13 - MLHSPlugin MsgL - Connection to HomeSeer successful.
                            22/09/2008 09:13:14 - MLHSPlugin MsgL - Got all devices from HomeSeer.
                            22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
                            22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
                            22/09/2008 09:13:14 - MLHSPlugin - Connection to HomeSeer Event Callback successful
                            22/09/2008 09:13:14 - COM Plugin - Calling InitIO
                            22/09/2008 09:13:14 - MLHSPlugin Debu - Entered InitIO() function.
                            22/09/2008 09:13:14 - MLHSPlugin Debu - Entered InitHW() function.
                            22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
                            22/09/2008 09:13:14 - Info - Finished initializing plug-in MLHSPlugin
                            22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
                            22/09/2008 09:13:17 - Info - Local IP address is: 192.168.1.22/24
                            22/09/2008 09:13:17 - Info - Web Server started on port 80
                            22/09/2008 09:13:20 - Info - Web Server authorized local login successful from: 127.0.0.1 User: default
                            22/09/2008 09:13:20 - Info - Creating ASP.NET application host...
                            22/09/2008 09:13:26 - Info - ASP.NET application host created
                            22/09/2008 09:13:26 - Startup - Initializing text to speech
                            22/09/2008 09:13:26 - Info - Listening for remote speaker connections on port 8742
                            22/09/2008 09:13:26 - Startup - Start remoting
                            22/09/2008 09:13:26 - Startup - Start event processing
                            22/09/2008 09:13:26 - Info - This version of HomeSeer is registered.
                            22/09/2008 09:13:26 - Startup - Scripting is OK
                            22/09/2008 09:13:26 - Info - Finished initializing scripting
                            22/09/2008 09:13:26 - Startup - Starting scheduler
                            22/09/2008 09:13:26 - Startup - Start up complete.
                            22/09/2008 09:19:55 - MLHSPlugin Debu - Entered name() function.

                            Comment


                              #44
                              Are you using Acelot as the X10 interface as well?

                              Comment


                                #45
                                yes with " C-max Control" it is connected well, but I can't have interface of the homesser with the " plugin ADIOcelot".
                                Normally when the homeseer run I can't use "COM4" (because it's already used by homeseer) but with " C-max Control" i can use it to access to Ocelot.
                                So homeseer can't connect to Ocelot with plugin ADIOcelot

                                Comment

                                Working...
                                X