Announcement

Collapse
No announcement yet.

ADIOcelot configuration

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • twa8000
    replied
    That fixed the problem! Thanks!

    -Tom-

    Leave a comment:


  • Michael McSharry
    replied
    My last attempt to help was attaching all the controls that the setup form uses. It is the last post at http://board.homeseer.com/showthread.php?t=133581

    Leave a comment:


  • twa8000
    replied
    Does anyone have an official fix? I just bought an ocelot and installed this plugin and the menu doesnt appear for me either... what does the config even do that i need to edit? Thanks

    -Tom-

    Leave a comment:


  • Czechmarty
    replied
    Well, then there is the suggestion that no one wants to hear.
    Reinstall everything.
    Sorry, I do not know what to suggest any further.
    Marty

    Leave a comment:


  • HomePilote
    Guest replied
    I have already do it, it still doesn't work

    Leave a comment:


  • Czechmarty
    replied
    Originally posted by HomePilote View Post
    yes with " C-max Control" it is connected well, but I can't have interface of the homesser with the " plugin ADIOcelot".
    Normally when the homeseer run I can't use "COM4" (because it's already used by homeseer) but with " C-max Control" i can use it to access to Ocelot.
    So homeseer can't connect to Ocelot with plugin ADIOcelot
    This is going to be only my best guess as I do not use Ocelot as X10 interface, but try to deselect the Ocelot as HS interface and try if you can reach the setup. If that still doesn't work, then try to deselect the X10 interface even on the Interfaces page for ADIOcelot and load the setup.
    Always remember to move the mail HS page (with scrolling log) way down as I suggested before.
    Does anybody else using Ocelot as X10 interface?

    Leave a comment:


  • HomePilote
    Guest replied
    yes with " C-max Control" it is connected well, but I can't have interface of the homesser with the " plugin ADIOcelot".
    Normally when the homeseer run I can't use "COM4" (because it's already used by homeseer) but with " C-max Control" i can use it to access to Ocelot.
    So homeseer can't connect to Ocelot with plugin ADIOcelot

    Leave a comment:


  • Czechmarty
    replied
    Are you using Acelot as the X10 interface as well?

    Leave a comment:


  • HomePilote
    Guest replied
    in log i have:

    22/09/2008 09:12:50 - Startup - Using system's regional settings
    22/09/2008 09:12:51 - Startup - Loading Settings
    22/09/2008 09:12:52 - Startup - Settings Loaded.
    22/09/2008 09:12:52 - Startup - Loading configuration file ...
    22/09/2008 09:12:54 - Info - Loading device types file...
    22/09/2008 09:12:54 - Database - Opening up HomeSeer database C:\Program Files\HomeSeer 2\Config\elpacha_20080919.mdb
    22/09/2008 09:12:59 - Database - HomeSeer configuration database C:\Program Files\HomeSeer 2\Config\elpacha_20080919.mdb has been closed.
    22/09/2008 09:13:00 - Info - Loading Devices...
    22/09/2008 09:13:04 - Load Config - 267 total devices loaded.
    22/09/2008 09:13:04 - Load Config - Checking device type settings for all devices...
    22/09/2008 09:13:05 - Load Config - Finished checking device type settings.
    22/09/2008 09:13:05 - Load Config - Loading Events...
    22/09/2008 09:13:05 - Load Config - 6 total events loaded.
    22/09/2008 09:13:05 - Info - Loading TV Timers...
    22/09/2008 09:13:05 - Info - HomeSeer version is: 2.2.0.66
    22/09/2008 09:13:06 - Info - Initializing phone interface...
    22/09/2008 09:13:06 - HSPhone - HomeSeer Phone Web Interface initializing.
    22/09/2008 09:13:08 - Startup - Checking for available plug-ins
    22/09/2008 09:13:09 - Info - Found plug-in: ADIOcelot, version: 1.14.0.3
    22/09/2008 09:13:09 - Info - Found plug-in: LiteJet, version: 0.1.2406.27175
    22/09/2008 09:13:10 - Info - Found plug-in: MLHSPlugin, version: 2.0.0.40
    22/09/2008 09:13:10 - Startup - Restoring device status
    22/09/2008 09:13:10 - Startup - Initializing Plug-Ins
    22/09/2008 09:13:10 - Info - Initializing X10 Plug-in: ADIOcelot On COM Port 4
    22/09/2008 09:13:10 - Info - Initializing Plug-in: ADIOcelot
    22/09/2008 09:13:10 - Info - Finished initializing X10 interface ADIOcelot
    22/09/2008 09:13:11 - Info - Initializing Infrared interface ADIOcelot on COM 4
    22/09/2008 09:13:11 - Info - Finished initializing infrared interface ADIOcelot
    22/09/2008 09:13:11 - Info - Initializing Plug-in: ADIOcelot
    22/09/2008 09:13:11 - COM Plugin - Calling InitIO
    22/09/2008 09:13:11 - Info - Finished initializing plug-in ADIOcelot
    22/09/2008 09:13:11 - Info - Interface LiteJet is running as a trial, 9 days remaining.
    22/09/2008 09:13:11 - Info - Initializing Plug-in: LiteJet on COM port 3
    22/09/2008 09:13:12 - LiteJet - Processing configuration file: C:\Program Files\HomeSeer 2\Config\CL24_20080625.cl
    22/09/2008 09:13:12 - LiteJet WARNING - RS-232 Notification is not turned on for all loads in the system.
    22/09/2008 09:13:12 - LiteJet - Initializing LiteJet on COM port 3
    22/09/2008 09:13:12 - LiteJet - Receive Thread Started...
    22/09/2008 09:13:12 - LiteJet - Starting communications check...
    22/09/2008 09:13:12 - Info - Finished initializing plug-in LiteJet
    22/09/2008 09:13:12 - Info - Initializing Plug-in: MLHSPlugin
    22/09/2008 09:13:12 - MLHSPlugin Info - MLHSPlugin - Krumpholz Enterprises (Version :2.0.0.40) - Private Consumer Licensed Version
    22/09/2008 09:13:12 - MLHSPlugin Info - MLHSPlugin has detected HomeSeer version 2.2.0.66
    22/09/2008 09:13:12 - MLHSPlugin Info - MLHSPlugin - initializing I/O...
    22/09/2008 09:13:12 - MLHSPlugin MsgL - Loaded PermanentHSDevices from configuration file: ]56~]1~]32~]5~]36~]45~]44~]46~]31~]38~]47~]39~]48~]9~]3~]10~]4~]23~]6~]67~]34~]7~]78~]89~]12~]33~]52~]51~]53~]54~]2~]35~]8~]14~]20~]11~]13~]18~]19~]25~]97~]98~]99~\1~\2~\3~\4~\5~\6~\7~\8~\9~\10~\11~\12~\13~\14~\20~\31~\3 3~\34~\35~\36~\37~#1~#2~#11~#12~#13~$58~$59~$60~$61~$64~#14~ #15~#16~#17~#18~#19~#20~#3~#21~#22~#23~#24~#25~#26~#27~#28~# 29~#30~#4~#31~#32~#33~#34~#35~#36~#37~#38~#39~#40~#5~#41~#42 ~#43~#44~#45~#46~#47~#48~#49~#50~#6~#51~#52~#53~#54~#55~#56~ #57~#58~#59~#60~#7~#8~#9~$17~$18~$19~$20~$21~$22~$23~$24~$25 ~$26~#10~$27~$28~$29~$30~$31~$32~$33~$36~[1~[2~[3~[4~[5~[6~[7~[8~[9~[10~[11~[12~[13~[14~[15~[16
    22/09/2008 09:13:12 - MLHSPlugin Info - Loading Configuration Successfully...
    22/09/2008 09:13:12 - MLHSPlugin MsgL - Loading Configuration Successfully...
    22/09/2008 09:13:12 - MLHSPlugin Info - ......configured to listen on TCP Port 2410
    22/09/2008 09:13:12 - MLHSPlugin Info - ......will subscribe to HomeSeer device change notification for devices ]56~]1~]32~]5~]36~]45~]44~]46~]31~]38~]47~]39~]48~]9~]3~]10~]4~]23~]6~]67~]34~]7~]78~]89~]12~]33~]52~]51~]53~]54~]2~]35~]8~]14~]20~]11~]13~]18~]19~]25~]97~]98~]99~\1~\2~\3~\4~\5~\6~\7~\8~\9~\10~\11~\12~\13~\14~\20~\31~\3 3~\34~\35~\36~\37~#1~#2~#11~#12~#13~$58~$59~$60~$61~$64~#14~ #15~#16~#17~#18~#19~#20~#3~#21~#22~#23~#24~#25~#26~#27~#28~# 29~#30~#4~#31~#32~#33~#34~#35~#36~#37~#38~#39~#40~#5~#41~#42 ~#43~#44~#45~#46~#47~#48~#49~#50~#6~#51~#52~#53~#54~#55~#56~ #57~#58~#59~#60~#7~#8~#9~$17~$18~$19~$20~$21~$22~$23~$24~$25 ~$26~#10~$27~$28~$29~$30~$31~$32~$33~$36~[1~[2~[3~[4~[5~[6~[7~[8~[9~[10~[11~[12~[13~[14~[15~[16
    22/09/2008 09:13:12 - MLHSPlugin Info - ......MLHSPlugin is enabled.
    22/09/2008 09:13:12 - MLHSPlugin MsgL - Waiting for connection from MLServer MLHSPlugin on TCP Port 2410
    22/09/2008 09:13:13 - MLHSPlugin MsgL - HomeSeer System Uptime : 0 Days 0 Hours 0 Minutes 4 Seconds
    22/09/2008 09:13:13 - MLHSPlugin MsgL - Connection to HomeSeer successful.
    22/09/2008 09:13:14 - MLHSPlugin MsgL - Got all devices from HomeSeer.
    22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
    22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
    22/09/2008 09:13:14 - MLHSPlugin - Connection to HomeSeer Event Callback successful
    22/09/2008 09:13:14 - COM Plugin - Calling InitIO
    22/09/2008 09:13:14 - MLHSPlugin Debu - Entered InitIO() function.
    22/09/2008 09:13:14 - MLHSPlugin Debu - Entered InitHW() function.
    22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
    22/09/2008 09:13:14 - Info - Finished initializing plug-in MLHSPlugin
    22/09/2008 09:13:14 - MLHSPlugin Debu - Entered name() function.
    22/09/2008 09:13:17 - Info - Local IP address is: 192.168.1.22/24
    22/09/2008 09:13:17 - Info - Web Server started on port 80
    22/09/2008 09:13:20 - Info - Web Server authorized local login successful from: 127.0.0.1 User: default
    22/09/2008 09:13:20 - Info - Creating ASP.NET application host...
    22/09/2008 09:13:26 - Info - ASP.NET application host created
    22/09/2008 09:13:26 - Startup - Initializing text to speech
    22/09/2008 09:13:26 - Info - Listening for remote speaker connections on port 8742
    22/09/2008 09:13:26 - Startup - Start remoting
    22/09/2008 09:13:26 - Startup - Start event processing
    22/09/2008 09:13:26 - Info - This version of HomeSeer is registered.
    22/09/2008 09:13:26 - Startup - Scripting is OK
    22/09/2008 09:13:26 - Info - Finished initializing scripting
    22/09/2008 09:13:26 - Startup - Starting scheduler
    22/09/2008 09:13:26 - Startup - Start up complete.
    22/09/2008 09:19:55 - MLHSPlugin Debu - Entered name() function.

    Leave a comment:


  • Czechmarty
    replied
    Try this:
    Move the HS log window aside before you click the ADIOcelot.
    In my system the window appears behind the LOG window and the LOG window becomes "frozen". I'm not sure why as this never happen to me before until I recently build a new machine with 2 cores AMD and clean new install. When I finish my ADIOcelot setup and click Update or Cancel, the LOG window is OK again. Note that HS keeps running even consider the LOG window is frozen. It's weird, but still works.

    Leave a comment:


  • Michael McSharry
    replied
    What happens when you you select ADIOcelot from the form where HS shows the log and then select the setup option under the pulldown presented from the menu?

    Leave a comment:


  • HomePilote
    Guest replied
    i have install author computer; the same problem appeared

    Leave a comment:


  • HomePilote
    Guest replied
    no it not appear; when i make Cntr+alt+supp "Adiocelt" appera in process; but i dont have his window.
    i cant access to it with menu homesser and with Interfaces configuration.

    Leave a comment:


  • Michael McSharry
    replied
    'When set to 1 you then have access via the menu pulldown to the plugin config form. The form will appear in the midle of the screen behind any other open windows. To se it do not hve other wndows showing in the midle.

    Leave a comment:


  • HomePilote
    Guest replied
    on my .ini i have " showInMenu=1" when I make " showInMenu=true" ADIOcelot disappear of the menu homeseer.

    Leave a comment:

Working...
X