Announcement

Collapse
No announcement yet.

Ds2423 & ds9097

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Thank you Michael, I had the same issue with the water meters.
    - Pete

    Auto mator
    Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb- Mono 6.12.X - HSTouch on Intel tabletop tablets
    Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.12.X
    HS4 Pro - V4.1.10.0 - Ubuntu 18.04/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb - Mono 6.12.x
    HS4 Lite -

    X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

    Comment


      #17
      Thanks alot Michael. I got it to work with WATT_HISTORY6

      WATT_HISTORY=;0;0;0;0;2009-06-07 20:42:46;0;0
      WATT_HISTORY2=;0;4176,92925050802;7;20646;2009-06-07 21:13:58;19807;0
      WATT_HISTORY4=;0;2903,99876528603;7;23395;2009-06-07 20:42:46;22905;0
      WATT_HISTORY5=;0;0;7;3528;2009-06-07 20:36:09;3528;0
      WATT_HISTORY6=;0;4176,92925050802;7;20646;2009-06-07 21:13:58;0;448927360
      Please excuse any spelling and grammatical errors I may make.
      --
      Tasker Plugin / Speech Droid
      Tonlof | Sweden

      Comment


        #18
        Hello Michael,

        I total'd my counters.

        I set everything to zero (which I shouldn't have) and my numbers didn't zero out at midnight.

        GALLON_HISTORY=;0;0;7;0;6/7/2009 9:14:08 PM;0;0
        GALLON_HISTORY2=;0;0;7;0;6/7/2009 9:14:08 PM;0;0
        GALLON_HISTORY4=;0;0;7;0;6/7/2009 9:14:08 PM;0;0
        GALLON_HISTORY5=;0;0;7;0;6/7/2009 9:14:08 PM;0;0
        GALLON_HISTORY6=;0;0;7;0;6/7/2009 9:14:08 PM;0;0

        What can I do to correct this?
        Attached Files
        - Pete

        Auto mator
        Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb- Mono 6.12.X - HSTouch on Intel tabletop tablets
        Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.12.X
        HS4 Pro - V4.1.10.0 - Ubuntu 18.04/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb - Mono 6.12.x
        HS4 Lite -

        X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

        Comment


          #19
          At midnight all that should happen is the 6) entry in the list should change to the current hardware counter value. When you zero'd everything then I would expect your daily value would be very high based upon a 0 at midnight reading vs. the current counter value and the rate would also be corresponding high for a short while. Are you indicating now that these history value lines are never updated? If you exit xapmcs1wire to flush the buffer then you see the current values from the .ini file. When xapmcs1wire is running then the ini file may not be updated depending upon cache logic.

          Comment


            #20
            Hello Michael,

            I don't think they updated because I made the change late evening (around 8-9 PM).

            Just exited - here are the ini values:

            GALLON_HISTORY=;0;1.69364936216836E-94;8;7355;6/8/2009 11:39:48 AM;0;7056
            GALLON_HISTORY2=;0;9.88131291682493E-324;8;4855;6/8/2009 11:39:48 AM;0;4855
            GALLON_HISTORY4=;0;1.69364936216836E-94;8;12210;6/8/2009 11:39:48 AM;0;11911
            GALLON_HISTORY5=;0;1.69364936216836E-94;8;7355;6/8/2009 11:39:48 AM;0;7056
            GALLON_HISTORY6=;0;9.88131291682493E-324;8;4855;6/8/2009 11:39:48 AM;0;4855

            which is different from earlier this morning....I would have thought that the sprinkler flow should have gone to zero (not used it in a couple of days) and the number on the main would have gone up but not above say 300 gallons (morning shower etc)....

            And here's a pic...
            Attached Files
            - Pete

            Auto mator
            Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb- Mono 6.12.X - HSTouch on Intel tabletop tablets
            Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.12.X
            HS4 Pro - V4.1.10.0 - Ubuntu 18.04/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb - Mono 6.12.x
            HS4 Lite -

            X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

            Comment


              #21
              Thanks Pete, there was logic based upon the end of the string so the new item messed it up. I corrected in V2.11.1 of xapmcs1wire. It is uploaded

              Comment


                #22
                Thanks Michael.
                - Pete

                Auto mator
                Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb- Mono 6.12.X - HSTouch on Intel tabletop tablets
                Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.12.X
                HS4 Pro - V4.1.10.0 - Ubuntu 18.04/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb - Mono 6.12.x
                HS4 Lite -

                X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

                Comment

                Working...
                X