Announcement

Collapse
No announcement yet.

MCS Temp--Error in SetDeviceLastChange

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DSteiNeuro
    replied
    I suspecyed this as well and tried several time to change the device code in the Sensor table with no luck.

    I will try editing the .ini as suggested.

    May be a while because I rolled back to the prior version of HSPro and everything is stable again. I saw the same error on other threads. I think that maybe Rich changed the error checking.

    Thanks

    Leave a comment:


  • Michael McSharry
    replied
    The issue appears to be associated with reading the internal ADC from the Temp08 which likely does not show up as a devices when mcsTemperature asks the Temp08 for a list of devices at startup.

    It will be difficult to setup to try to get to the bottom of it, but I would like you to try the following. In your mcsTemperature.ini file you have the following.

    1B00000075179A26="$5,05:05,0,0,0"
    1B00000075179A26V="$51,05:01,0,0,0"
    INTERNAL_ADC__00V="$57,,0,0,0"
    1B00000075179A26A="%51,05:01,0,0,0"

    Change the internal ADC to be the following and then start HS2 up.

    INTERNAL_ADC__00V="$57,09,0,0,0"

    Leave a comment:


  • DSteiNeuro
    replied
    Here is the debug log. Nothing popped out at me.
    I tried deleting the .ini file and letting MCS Temp rebuild, but the error came back as soon as I started copying the virtual devices to HS. I also develted the HS devices and let MCS Temp rebulid these.

    I ended up rolling back to the prior version of HSPro, but would like to get this to work so that I can use the Aeon Multisensors which require the newer version of HSPro.

    Thanks if you can find anything.

    David
    Attached Files

    Leave a comment:


  • Michael McSharry
    replied
    Best change of understanding problem is with a general debug output. It seems to be indicating that some device that is selected has a blank house code or a full blank device code.

    Leave a comment:


  • DSteiNeuro
    started a topic MCS Temp--Error in SetDeviceLastChange

    MCS Temp--Error in SetDeviceLastChange

    Hello, I upgraded to HSP 2.5.0.80 and now am getting the following error every time MCSTemp updates. I have attached my .ini

    6/10/2013 5:51:59 PM - Plug-In - Found plug-in: mcsTemperature, version: 6.4.0.0


    6/10/2013 5:54:06 PM - Warning - Setting device string, housecode is not set. String is: <table><td><img alt='Voltage' src='/images/sensors/voltage.gif' height='16' width='16'><img alt=' ' src='/images/sensors/blank3.gif'></td><td valign='middle' align='left'><font color='gray'>0 v</font></td></table>
    6/10/2013 5:54:06 PM - Error - In SetDeviceLastChange:Length of argument 'String' must be greater than zero.

    Sorry if I missed this somewhere.

    Thanks,
    David
    Attached Files
    Last edited by DSteiNeuro; June 10th, 2013, 08:19 PM.
Working...
X