LCD not syncing.

[chrkov]

Michael,

I seem to have one small issue still. I can set the lcd text and turn the lcd backlight on and off without any issues from xap1wire.

From HS, I can turn the lcd backlight on and off with no issues. But I cannot get the lcd text to sync at all. If I set the text in xap1wire, the status in HS never updates. Also, if I set the devicestring in HS, it never updates over to xap1wire.

I did a debug in the HS xap and set the string. here is the part of the log that I see it in.

12/19/2009 8:16:33 AM ~!~Event~!~Running script in background: lcdsetup
12/19/2009 8:16:33 AM ~!~mcsXap Debug EVentCB~!~64,[30,Outside Temp:32.1F Sprinklers:Auto Deck Light:
12/19/2009 8:16:33 AM ~!~mcsXap Debug~!~HSEVENT String [30, Current= Outside Temp:32.1F Sprinklers:Auto Deck Light: , New=Outside Temp:32.1F Sprinklers:Auto Deck Light:
12/19/2009 8:16:33 AM ~!~mcsXap Debug~!~xAP Send Homeseer.Event Device~[30|Text~ Outside Temp:32.1F Sprinklers:Auto Deck Light:
12/19/2009 8:16:35 AM ~!~mcsXap Debug~!~xapbsc.event Source=mcs.onewire.kov-nt0:xapmcs1wire_guest bedroom temp.420008016ba52110.temperature,Exists=True
12/19/2009 8:16:35 AM ~!~mcsXap Debug~!~SetBSCData Section=0, DC=[1, State=OFF, Status=3
12/19/2009 8:16:35 AM ~!~mcsXap Debug EVentCB~!~64,[1,68.9

I also run MessageViewer and I never see a message to for the lcd.

All my temps and switches and relays work perfectly.

[Michael McSharry]

The following the event the next thing I see in your debug is the start of an error message using the Homeseer.Event schema.

12/19/2009 8:16:33 AM ~!~mcsXap Debug~!~xAP Send Homeseer.Event Device~[30|Text~ Outside Temp:32.1F Sprinklers:Auto Deck Light:


Try a case of a simple text string or look at this Homeseer.Event in the xAP Viewer so we can see the entire message. I'm running HS1 for my LCD so I do not have an exact environment that you have.

[chrkov]

Michael,

Disregard, I am an idiot and figured out that I was updating an old device that I forgot to delete.

Thanks!