Announcement

Collapse
No announcement yet.

connection failed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    After viewing my HS logs from yesterday, I confirmed that after upgrading to this plugin version, I stopped seeing the devices in the log.

    This is how it showed before the upgrade.

    Jan-19 12:16:03 PM Arduino Plugin Change of Device Study Motion To Value Closed
    Jan-19 12:16:01 PM Arduino Plugin Change of Device Study Motion To Value Open
    Jan-19 12:13:54 PM Arduino Plugin Change of Device Kitchen Motion To Value Closed
    Jan-19 12:13:52 PM Arduino Plugin Change of Device Kitchen Motion To Value Open

    Now, the new version if I have the logging set to Normal, I don't see any devices logged. When I select "Inputs", I see the input ones, but not with the name of the device like before, just the input number. If I select "All", I get way too much information.

    Jan-20 12:01:14 PM Arduino Plugin Arduino, Board:1, Input:26, Value:0
    Jan-20 12:01:12 PM Arduino Plugin Arduino, Board:1, Input:26, Value:1
    Jan-20 12:01:04 PM Arduino Plugin Logging Level changed to Inputs

    Comment


      #17
      Greig,

      today i'm installed HS3(trail) on a Windows 10 PC.
      instal arduino plugin V1.0.0.131

      download the sketch and upload to the board with IDE 1.6.8
      become the same red lines when i'm verify the sketch.
      upload to the board and it's working.

      put screw shield on and the ethernet shield, but not working.
      on the screw shield ar no contacts to connect the 6 pins on the underside from the ethernet shield.
      make a connection to the 6 pins, and everything working.

      but on my HS3(registered) PC it's not working.

      so i'm gonna do a full reinstall from HS3.

      Mark
      Last edited by strongetje; January 22, 2017, 07:56 AM.

      Comment

      Working...
      X