Announcement

Collapse
No announcement yet.

No inputs in Homeseer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Broes
    replied
    Finally took the time to take a better look and guess what?
    I did put the connector in the wrong place, instead of pin 22 -52 I connected 23- 53

    Leave a comment:


  • Broes
    replied
    Thanks for your response.
    Still not working but I have a spare board laying around I am going to exchange them toe see if this will solve the problem.

    Leave a comment:


  • jchestnuts
    replied
    Did you get it working? The only thing I noticed was that it looks like you are using version 1 Ethernet shield. I believe the official arduino made version 1 Ethernet shields are fine, but most of the clones have issues. I believe the version 2 Ethernet shields generally work better, at least for the clones.

    Leave a comment:


  • Broes
    started a topic No inputs in Homeseer

    No inputs in Homeseer

    Hi,

    Till recently I was using a Mega with an ethernet shield without problems to read some inputs.
    I don't know what changed but I lost connection with the board.
    The board is now connecting again (I did put it on a fixed IP address) but HS doesn't read the inputs.
    I downloaded a new sketch from the plugin and it compiles without mistakes (with the latest libraries).
    Hopefully someone can put me in the right direction?

    Plugin V1.0.0.147
    Arduino IDE V1.8.1

Working...
X