Using V1.0.0.158 beta all setup working, can see the pin state changing state, but then disconnects, until I press the Reset button or unplug.
Then it re-connects for a further 5 mins.
I can ping the Uno
before connection
During Connection
And after disconnection
Snippet of Log
Arduino Log Messages will display here:
Sent to IP:192.168.2.75 Port No:8900 = 1 K ,Keep Alive Command
Keeping Board: 1 Alive.
Warning = Board: 1 has a connection ERROR. Retrying.
Sent to IP:192.168.2.75 Port No:8900 = 1 C ,Connect Command
Warning = Board: 1 has a connection ERROR. Trying Reset.
Sent to IP:192.168.2.75 Port No:8900 = 1 r ,Reset Command
Error = Board: 1 Connection FAILED.
unit is still pingable
Then it re-connects for a further 5 mins.
I can ping the Uno
before connection
During Connection
And after disconnection
Snippet of Log
Arduino Log Messages will display here:
Sent to IP:192.168.2.75 Port No:8900 = 1 K ,Keep Alive Command
Keeping Board: 1 Alive.
Warning = Board: 1 has a connection ERROR. Retrying.
Sent to IP:192.168.2.75 Port No:8900 = 1 C ,Connect Command
Warning = Board: 1 has a connection ERROR. Trying Reset.
Sent to IP:192.168.2.75 Port No:8900 = 1 r ,Reset Command
Error = Board: 1 Connection FAILED.
unit is still pingable
Comment