Announcement

Collapse
No announcement yet.

Warning = Com Port No:6 is not open

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mikeycoll
    replied
    Thanks petez69!

    Leave a comment:


  • petez69
    replied
    When you configure the board you need to insert the addresses into the board configurator when adding it.. Once the addresses are in the config, THEN download the board config as it puts the IP details you've selected into the Arduino file. (INO) . If you open the board.ino file with the IDE, you will see the fields. Here is my config in the ino file:

    char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; //buffer to hold incoming packet,
    byte mac[] = {0x00, 0xAA, 0xBB, 0xCC, 0xDE, 0x03};
    IPAddress ip(192,168,11,232); //IP entered In HS config.
    const unsigned int localPort = 8902; //port entered In HS config.
    IPAddress HomeseerIP(192,168,11,24); //Homeseer IP address
    IPAddress gateway(192,168,11,1);
    IPAddress subnet(255,255,255,0);

    Click image for larger version  Name:	Capture.PNG Views:	0 Size:	21.3 KB ID:	1380226

    Leave a comment:


  • mikeycoll
    replied
    Tried a ethernet shield and couldn't make it work, IP address that was assigned did not exist. How do you find the IP address of the Uno?

    Bought another Uno and tried it both on USB and IP and it's doing the same thing except now I can't download any Sketch when I try the API says "'ipconst' does not name a type'

    Arduino: 1.6.8 (Windows 10), Board: "Arduino Uno"

    C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware "C:\Program Files (x86)\Arduino\hardware" -hardware "C:\Users\Mike\AppData\Local\Arduino15\packages" -tools "C:\Program Files (x86)\Arduino\tools-builder" -tools "C:\Program Files (x86)\Arduino\hardware\tools\avr" -tools "C:\Users\Mike\AppData\Local\Arduino15\packages" -built-in-libraries "C:\Program Files (x86)\Arduino\libraries" -libraries "C:\Users\Mike\Documents\Arduino\libraries" -fqbn=arduino:avr:uno -vid-pid=0X2341_0X0043 -ide-version=10608 -build-path "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoar d1.ino"
    C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware "C:\Program Files (x86)\Arduino\hardware" -hardware "C:\Users\Mike\AppData\Local\Arduino15\packages" -tools "C:\Program Files (x86)\Arduino\tools-builder" -tools "C:\Program Files (x86)\Arduino\hardware\tools\avr" -tools "C:\Users\Mike\AppData\Local\Arduino15\packages" -built-in-libraries "C:\Program Files (x86)\Arduino\libraries" -libraries "C:\Users\Mike\Documents\Arduino\libraries" -fqbn=arduino:avr:uno -vid-pid=0X2341_0X0043 -ide-version=10608 -build-path "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoar d1.ino"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\SoftPWM\SoftPWM.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Servo\src\avr\Servo.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "C:\Program Files (x86)\Arduino\libraries\Servo\src\sam\Servo.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "C:\Program Files (x86)\Arduino\libraries\Servo\src\samd\Servo.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "C:\Program Files (x86)\Arduino\libraries\OneWire\OneWire.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\DallasTemperature\DallasTemperature. cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "C:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C\LiquidCrystal_I2C. cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src\Wire.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src\utility\twi.c" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src\SPI.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Dhcp.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Dns.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\EthernetClient.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\EthernetServer.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\EthernetUdp.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\utility\socket.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\utility\w5100.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "nul"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\preproc\ctags_target_for_gcc_minus_e.cpp"
    "C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino10/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\preproc\ctags_target_for_gcc_minus_e.cpp"
    "C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\tool s\avr-gcc\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10608 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\cores\arduino" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\variants\standard" "-IC:\Program Files (x86)\Arduino\libraries\Servo\src" "-IC:\Program Files (x86)\Arduino\libraries\OneWire" "-IC:\Program Files (x86)\Arduino\libraries\DallasTemperature" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\Wire\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\SPI\src" "-IC:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hard ware\avr\1.8.2\libraries\EEPROM\src" "-IC:\Program Files (x86)\Arduino\libraries\SoftPWM" "-IC:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp" -o "C:\Users\Mike\AppData\Local\Temp\build22e990a5ecfe7cda0abd9 a73ab0f68cd.tmp\sketch\HomeseerBoard1.ino.cpp.o"
    APIBoard1:17: error: 'ipconst' does not name a type

    ipconst byte BoardAdd = 1;

    ^~~~~~~

    APIBoard1:30: error: redefinition of 'byte EEpromVersion'

    byte EEpromVersion = EEPROM.read(250);

    ^~~~~~~~~~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:21:6: note: 'byte EEpromVersion' previously declared here

    byte EEpromVersion = EEPROM.read(250);

    ^~~~~~~~~~~~~

    APIBoard1:34: error: redefinition of 'boolean IsConnected'

    boolean IsConnected = false; // *

    ^~~~~~~~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:20:6: note: 'bool IsConnected' previously defined here

    bool IsConnected = false;

    ^~~~~~~~~~~

    APIBoard1:40: error: redefinition of 'void (* resetFunc)()'

    void(* resetFunc) (void) = 0; // *

    ^

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:35:8: note: 'void (* resetFunc)()' previously defined here

    void(* resetFunc) (void) = 0;

    ^~~~~~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino : In function 'void setup()':

    APIBoard1:44: error: redefinition of 'void setup()'

    void setup() {

    ^~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino :745:6: note: 'void setup()' previously defined here

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino : In function 'void loop()':

    APIBoard1:58: error: redefinition of 'void loop()'

    void loop() {

    ^~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino :828:6: note: 'void loop()' previously defined here

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino : At global scope:

    APIBoard1:141: error: redefinition of 'char* Version'

    char* Version = "API1.0.0.118";

    ^~~~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:19:7: note: 'char* Version' previously defined here

    char* Version = "1.0.0.127";

    ^~~~~~~

    APIBoard1:143: error: redefinition of 'byte Byte1'

    byte Byte1,Byte2,Byte3;

    ^~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:17:6: note: 'byte Byte1' previously declared here

    byte Byte1, Byte2, Byte3;

    ^~~~~

    APIBoard1:143: error: redefinition of 'byte Byte2'

    byte Byte1,Byte2,Byte3;

    ^~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:17:13: note: 'byte Byte2' previously declared here

    byte Byte1, Byte2, Byte3;

    ^~~~~

    APIBoard1:143: error: redefinition of 'byte Byte3'

    byte Byte1,Byte2,Byte3;

    ^~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:17:20: note: 'byte Byte3' previously declared here

    byte Byte1, Byte2, Byte3;

    ^~~~~

    APIBoard1:144: error: conflicting declaration 'int Byte4'

    int Byte4,Byte5;

    ^~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:18:14: note: previous declaration as 'unsigned int Byte4'

    unsigned int Byte4, Byte5;

    ^~~~~

    APIBoard1:144: error: conflicting declaration 'int Byte5'

    int Byte4,Byte5;

    ^~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\HomeseerBoard 1.ino:18:21: note: previous declaration as 'unsigned int Byte5'

    unsigned int Byte4, Byte5;

    ^~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino : In function 'void SendConnect()':

    APIBoard1:177: error: redefinition of 'void SendConnect()'

    void SendConnect()

    ^~~~~~~~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino :340:6: note: 'void SendConnect()' previously defined here

    Serial.print(BoardAdd);

    ^~~~~~~~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino : In function 'void DataEvent()':

    APIBoard1:243: error: redefinition of 'void DataEvent()'

    void DataEvent() {

    ^~~~~~~~~

    C:\Users\Mike\Documents\Arduino\HomeseerBoard1\APIBoard1.ino :484:6: note: 'void DataEvent()' previously defined here

    Using library EEPROM at version 2.0 in folder: C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hardw are\avr\1.8.2\libraries\EEPROM
    Using library SoftPWM in folder: C:\Program Files (x86)\Arduino\libraries\SoftPWM (legacy)
    Using library Servo at version 1.1.2 in folder: C:\Program Files (x86)\Arduino\libraries\Servo
    Using library OneWire at version 2.3.2 in folder: C:\Program Files (x86)\Arduino\libraries\OneWire
    Using library DallasTemperature at version 3.7.6 in folder: C:\Program Files (x86)\Arduino\libraries\DallasTemperature
    Using library LiquidCrystal_I2C at version 1.1.2 in folder: C:\Program Files (x86)\Arduino\libraries\LiquidCrystal_I2C
    Using library Wire at version 1.0 in folder: C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hardw are\avr\1.8.2\libraries\Wire
    Using library SPI at version 1.0 in folder: C:\Users\Mike\AppData\Local\Arduino15\packages\arduino\hardw are\avr\1.8.2\libraries\SPI
    Using library Ethernet at version 1.1.2 in folder: C:\Program Files (x86)\Arduino\libraries\Ethernet
    exit status 1
    'ipconst' does not name a type

    Leave a comment:


  • mikeycoll
    replied
    Hi Greig and Chris,

    I turned off the antivirus and the firewall with no change, tried a different USB and cable with no change. This is a wierd one.

    Thanks for your help so far.

    Leave a comment:


  • clafa
    replied
    Hi

    Have you tried to plug the arduino in a different usb ?

    I had issues with one usb port.

    Also dont rule out the actual usb cable itself,

    Tks
    Chris


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • enigmatheatre
    replied
    Do you have an Antivirus that could be blocking the arduino.exe from the ports?

    Leave a comment:


  • mikeycoll
    replied
    Hi Greig,

    Yes the USB port and the Arduino IDE is on the HS server.
    Tried the beta version and same connection problem.

    Leave a comment:


  • enigmatheatre
    replied
    Just to confirm the USB port is on the HS server and you have the Arduino IDE (Yes the compiler/editor) on there too.
    Try the Beta version of the plugin as there are differences in the connection routine and it might help.

    Greig.

    Leave a comment:


  • mikeycoll
    replied
    Yes the board is set to com 6.
    It is connected via USB
    By IDE you mean the Arduino compiler/editor correct?
    I shut down the IDE and restarted the computer but no connection, the log says there is a connection problem, it tries to connect 2 times then quits connecting.
    I am ordering a mega but it won't arrive for a week or so.

    Thanks for your help,
    Mike

    Leave a comment:


  • enigmatheatre
    replied
    mikeycoll,

    The debug is not of the board connecting so I can not see any problems here.
    Is it set as com 6 as per the log?
    Is the board connected to the HS server with USB?
    Are you running the IDE not the same device as HS or a separate one?
    If it is the same device is the IDE closed as it can hog comports sometimes?

    As Pete states above you can connect with Ethernet which is a much more versatile connection method and I would recommend a mega as the Uno is short on pins and has low memory.

    Greig.

    Leave a comment:


  • petez69
    replied
    Greig will need to chip in I think. Quickly looking at the debug, the board has an IP address yet you mention comport 6. Are you connected via USB or ethernet to the board ? If its ethernet can you ping the ip address of the Uno board ? ie: 10.0.0.206 +

    Leave a comment:


  • mikeycoll
    started a topic Warning = Com Port No:6 is not open

    Warning = Com Port No:6 is not open

    New to Arduino, I have an UNO connected by USB. It's on com port 6 and has the latest driver, device status: "This device is working properly".
    1. Using Arduino 1.6.8
    2. Tried the blink program and it worked.
    3. I can upload the HomeseerBord1.ino to the board without error.
    4. I'm getting a "Warning = Com Port No:6 is not open" message.
    5. The board will say it's connected if I uncheck and check the "Auto Connect" checkbox. but I have no communication coming from the board and HS reads 0% on analog pin 0 even though there is 5v applied, digital pin 2 shows closed.
    6. I've tried every remedy I could find to resolve the com port closed error but nothing has made a difference.
    7. Tried uninstalling the com port and reinstalling it several times.
    8. Baud set to 9600
    I attached debug log for you to look at. I'm at my wits end, HELP!
    Attached Files
Working...
X