I am getting "version mismatch" with my boards in HS4 Pro. I installed 4.0.2.11 (registered) and I'd just like to get these boards running until I get time to download the new sketches and upload them to the boards. In the mean time I'm stuck on HS3 Pro because six switch boards control a lot of my house.
Announcement
Collapse
No announcement yet.
Version 1.0.0.147 download
Collapse
X
-
The versions are not compatible with the sketch so you need to change them on the boards to when you update. FYI 4.0.2.12 is in the updater that fixes a version number bug in 4.0.2.11.Zwave = Z-Stick, 3xHSM100� 7xACT ZDM230, 1xEverspring SM103, 2xACT HomePro ZRP210.
X10 = CM12U, 2xAM12, 1xAW10, 1 x TM13U, 1xMS13, 2xHR10, 2xSS13
Other Hardware = ADI Ocelot + secu16, Global Cache GC100, RFXtrx433, 3 x Foscams.
Plugings = RFXcom, ActiveBackup, Applied Digital Ocelot, BLDeviceMatrix, BLGarbage, BLLAN, Current Cost, Global Cache GC100,HSTouch Android, HSTouch Server, HSTouch Server Unlimited, NetCAM, PowerTrigger, SageWebcamXP, SqueezeBox, X10 CM11A/CM12U.
Scripts = Various
-
Follow up to my question, I downloaded the new sketches for my six boards. Once I upload these sketches to the boards and run them in HS4 and decide I'd like to roll back to HS3, do I have to upload the old sketches or are they backward compatible. This plug-in has to be my favorite and I get a lot of use out of it.
Comment
-
Yes, you need the correct sketch for the plugin version you are running. If you update to Beta V.166 in hs3 and update the sketches you should be able to hop between HS3 and HS4 using the same sketches.Zwave = Z-Stick, 3xHSM100� 7xACT ZDM230, 1xEverspring SM103, 2xACT HomePro ZRP210.
X10 = CM12U, 2xAM12, 1xAW10, 1 x TM13U, 1xMS13, 2xHR10, 2xSS13
Other Hardware = ADI Ocelot + secu16, Global Cache GC100, RFXtrx433, 3 x Foscams.
Plugings = RFXcom, ActiveBackup, Applied Digital Ocelot, BLDeviceMatrix, BLGarbage, BLLAN, Current Cost, Global Cache GC100,HSTouch Android, HSTouch Server, HSTouch Server Unlimited, NetCAM, PowerTrigger, SageWebcamXP, SqueezeBox, X10 CM11A/CM12U.
Scripts = Various
Comment
-
It is best practice to be on the correct version as I said but if you install the V1.0.0.166 sketch on the boards it will also function with HS3 plugin V1.0.0.166 and HS4 plugin V4.0.2.7 .Zwave = Z-Stick, 3xHSM100� 7xACT ZDM230, 1xEverspring SM103, 2xACT HomePro ZRP210.
X10 = CM12U, 2xAM12, 1xAW10, 1 x TM13U, 1xMS13, 2xHR10, 2xSS13
Other Hardware = ADI Ocelot + secu16, Global Cache GC100, RFXtrx433, 3 x Foscams.
Plugings = RFXcom, ActiveBackup, Applied Digital Ocelot, BLDeviceMatrix, BLGarbage, BLLAN, Current Cost, Global Cache GC100,HSTouch Android, HSTouch Server, HSTouch Server Unlimited, NetCAM, PowerTrigger, SageWebcamXP, SqueezeBox, X10 CM11A/CM12U.
Scripts = Various
Comment
-
Yes, it should be backwards compatible so you can test HS4. I have not tested this since HS4 was released but the code is still in place for this.Zwave = Z-Stick, 3xHSM100� 7xACT ZDM230, 1xEverspring SM103, 2xACT HomePro ZRP210.
X10 = CM12U, 2xAM12, 1xAW10, 1 x TM13U, 1xMS13, 2xHR10, 2xSS13
Other Hardware = ADI Ocelot + secu16, Global Cache GC100, RFXtrx433, 3 x Foscams.
Plugings = RFXcom, ActiveBackup, Applied Digital Ocelot, BLDeviceMatrix, BLGarbage, BLLAN, Current Cost, Global Cache GC100,HSTouch Android, HSTouch Server, HSTouch Server Unlimited, NetCAM, PowerTrigger, SageWebcamXP, SqueezeBox, X10 CM11A/CM12U.
Scripts = Various
Comment
Comment