I am using HS3 (Version 3.0.0.194), installed the Arduino plugin and installed Arduino 1.0.5-r2 to install the sketch. I have an Arduino Uno R3 to control an RGB LED as well as have output for 4 relays and input for 4 switches. This will control the lighting for my house number sign as well as monitor and control all 4 garage doors.
I set up Board No1 with all the parameters needed to do this. Download the Arduino library and put it same library folder as the Arduino.exe file.
I then download the firmware, open it and uploaded it to the Arduino via USB with the Ethernet shield attached. No errors come up and everything seems good.
I then disconnect the programmed Arduino from the HS3 computer and connect it to the network via ethernet cable and a wall wart for power. HS3 connects with it right away. I have the outputs of the Arduino connected to a relay board with 4 relays just to get some real world confirmation. I can switch the output off and on from HS3 but the relays do not function and then shortly after I get a connection error and then a connection failed.
I ping the Arduino and it seems it is there, this is what I get from the CMD.exe screen:
Any idea what I am doing wrong?
I set up Board No1 with all the parameters needed to do this. Download the Arduino library and put it same library folder as the Arduino.exe file.
I then download the firmware, open it and uploaded it to the Arduino via USB with the Ethernet shield attached. No errors come up and everything seems good.
I then disconnect the programmed Arduino from the HS3 computer and connect it to the network via ethernet cable and a wall wart for power. HS3 connects with it right away. I have the outputs of the Arduino connected to a relay board with 4 relays just to get some real world confirmation. I can switch the output off and on from HS3 but the relays do not function and then shortly after I get a connection error and then a connection failed.
I ping the Arduino and it seems it is there, this is what I get from the CMD.exe screen:
C:Users\CAD>ping 192.168.1.133
Pinging 192.168.1.133 with 32 bytes of data:
Reply from 192.168.1.133: bytes=32 time=4ms TTL=128
Reply from 192.168.1.133: bytes=32 time=2ms TTL=128
Reply from 192.168.1.133: bytes=32 time=1ms TTL=128
Reply from 192.168.1.133: bytes=32 time=1ms TTL=128
Ping statistics for 192.168.1.133:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 4ms, Average = 2ms
Pinging 192.168.1.133 with 32 bytes of data:
Reply from 192.168.1.133: bytes=32 time=4ms TTL=128
Reply from 192.168.1.133: bytes=32 time=2ms TTL=128
Reply from 192.168.1.133: bytes=32 time=1ms TTL=128
Reply from 192.168.1.133: bytes=32 time=1ms TTL=128
Ping statistics for 192.168.1.133:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 4ms, Average = 2ms
Comment