Russound Testing

[BIGMACK48]

I try BLRussound last nigjht. Everything seen to work ok except that zone6 didn't turn off with the message is finish spoken by BLSpeech. I set the option in Blspeech to restore to original state for BLRussound.

Here is a dump of the Log.

/10/2010 11:30:48 PM Event Event Trigger "BLSecurity Sound the Alarm"5/10/2010 11:30:49 PM BLRussound Info Message Sent --> F0 00 00 7F 00 00 70 05 02 02 00 00 F1 23 00 01 00 05 00 01 17 F75/10/2010 11:30:49 PM Event Event Trigger "Start Speaking"5/10/2010 11:30:50 PM Event Event Trigger "Stop Speaking"5/10/2010 11:30:52 PM BLRussound Info Message Sent --> F0 00 00 7F 00 00 70 05 02 02 00 00 F1 21 00 14 00 05 00 01 28 F75/10/2010 11:30:55 PM TTS Speak: ():Burglary! Burglary! You have entered an area protected by a security system, A call is being made to the Police Department. Leave Immediately5/10/2010 11:30:55 PM BLRussound Info Message Sent --> F0 00 00 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 F75/10/2010 11:30:55 PM BLRussound Info Message Sent --> F0 00 01 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 F75/10/2010 11:30:55 PM Event Event Trigger "Start Speaking"5/10/2010 11:30:55 PM BLRussound Info Message Sent --> F0 00 02 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 03 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 04 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 F75/10/2010 11:30:56 PM Event Event Trigger "Stop Speaking"5/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 05 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 00 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 01 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 02 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 03 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 04 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 F75/10/2010 11:30:56 PM BLRussound Info Message Sent --> F0 00 05 00 00 00 70 00 02 01 01 00 00 00 01 00 22 00 01 00 00 53 6F 75 72 63 65 20 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 F75/10/2010 11:31:05 PM BLRussound Info Message Sent --> F0 00 00 7F 00 00 70 05 02 02 00 00 F1 21 00 14 00 05 00 01 28 F7



Great Job Again in Developing this plugin. More that I excepted.
I have been a computer programmar for 30 years and your work is outstanding!!!

Thank You

Greg Mack

[BIGMACK48]

I try BLRussound last nigjht. Everything seen to work ok except that zone6 didn't turn off with the message is finish spoken by BLSpeech. I set the option in Blspeech to restore to original state for BLRussound

This Is attachment Log

Thank You

Greg Mack

[Blade]

OK here is what you need to do.
Log a help desk ticket on my web site (see signature)

Once you log the ticket, I need you to enable debug logging in BLSpeech and BLRussound and then do your speaking. Once it is done and the zone did not turn back off, disable debug logging in both plugins and attach the BLSpeech-Detailed.log and BLRussound-Detailed.log files to the ticket. It is most likely an issue in BLSpeech and not BLRussound

I will then have a look and see what is going on.
Thx