Originally posted by hellerbrewing
View Post
Announcement
Collapse
No announcement yet.
2/15/19 - New Firmware for Hubs available which may break plugin until you do this...
Collapse
This is a sticky topic.
X
X
-
Originally posted by hellerbrewing View PostStrange, I have .206 and the XMPP option is there for me, although it doesn't seem to be working.
Comment
-
Originally posted by hellerbrewing View PostStrange, I have .206 and the XMPP option is there for me, although it doesn't seem to be working.
- Likes 1
Comment
-
Okay, so (with help) I found the menu in the iOS app that had the XMPP option. Just going to the menu caused an update that left the hub at version .250.
The XMPP option was already set to enabled.
Unfortunately, the plugin isn't working with the hubs anymore. I even went and disabled XMPP on one of the them and then re-enabled it. That didn't seem to change anything. I also tried disabling the plug-in and then re-enabling it as well.
I'm was getting a lot of this before I finally disabled the plugin to stop it.Feb-18 9:12:32 AM MeiHarmonyHub: Error The Connection to Hub with ID 46b4cb49-e5ae-42eb-01c2-637bd7e904cc failed with message: AuthToken swap failed. Feb-18 9:12:32 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with stack trace: at HarmonyHub.Client.GetSessionToken(String ip, String username, String password, Boolean bypassLogitech) at HarmonyHub.Client.Authenticate() at HarmonyHub.Client.Connect(Int32 heartbeatInterval) Feb-18 9:12:32 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with message: AuthToken swap failed. Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with stack trace: at HarmonyHub.Client.GetSessionToken(String ip, String username, String password, Boolean bypassLogitech) at HarmonyHub.Client.Authenticate() at HarmonyHub.Client.Connect(Int32 heartbeatInterval) Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 46b4cb49-e5ae-42eb-01c2-637bd7e904cc failed with stack trace: at HarmonyHub.Client.GetSessionToken(String ip, String username, String password, Boolean bypassLogitech) at HarmonyHub.Client.Authenticate() at HarmonyHub.Client.Connect(Int32 heartbeatInterval) Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 46b4cb49-e5ae-42eb-01c2-637bd7e904cc failed with message: AuthToken swap failed. Thoughts?Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with message: AuthToken swap failed.
Comment
-
Originally posted by joegr View PostOkay, so (with help) I found the menu in the iOS app that had the XMPP option. Just going to the menu caused an update that left the hub at version .250.
The XMPP option was already set to enabled.
Unfortunately, the plugin isn't working with the hubs anymore. I even went and disabled XMPP on one of the them and then re-enabled it. That didn't seem to change anything. I also tried disabling the plug-in and then re-enabling it as well.
I'm was getting a lot of this before I finally disabled the plugin to stop it.Feb-18 9:12:32 AM MeiHarmonyHub: Error The Connection to Hub with ID 46b4cb49-e5ae-42eb-01c2-637bd7e904cc failed with message: AuthToken swap failed. Feb-18 9:12:32 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with stack trace: at HarmonyHub.Client.GetSessionToken(String ip, String username, String password, Boolean bypassLogitech) at HarmonyHub.Client.Authenticate() at HarmonyHub.Client.Connect(Int32 heartbeatInterval) Feb-18 9:12:32 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with message: AuthToken swap failed. Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with stack trace: at HarmonyHub.Client.GetSessionToken(String ip, String username, String password, Boolean bypassLogitech) at HarmonyHub.Client.Authenticate() at HarmonyHub.Client.Connect(Int32 heartbeatInterval) Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 46b4cb49-e5ae-42eb-01c2-637bd7e904cc failed with stack trace: at HarmonyHub.Client.GetSessionToken(String ip, String username, String password, Boolean bypassLogitech) at HarmonyHub.Client.Authenticate() at HarmonyHub.Client.Connect(Int32 heartbeatInterval) Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 46b4cb49-e5ae-42eb-01c2-637bd7e904cc failed with message: AuthToken swap failed. Thoughts?Feb-18 9:12:27 AM MeiHarmonyHub: Error The Connection to Hub with ID 3f01637b-880a-42b8-0d32-337f45cc50ca failed with message: AuthToken swap failed.
Comment
-
Question, I initially thought I could perform step 1) which sync the Remote but I was never offered the option of Enable/Disable XMPP, I ended up using my iPad App to perform step 2 as the PC version of Harmony also did not offer the ability to change XMPP am I missing something?
1) Perform a sync from your LCD screen based Harmony remote, by going to Menu > Settings > Sync Remote, or2) From your Harmony app, go to:Menu > Harmony Setup > Add/Edit Devices & Activities > Remote & Hub > Enable XMPP
both of my HUBs had updated to v.250 and indicated that XMPP was enabled but I noticed that the PI did not recognized one of my hub (got a bunch of error messages) so I basically disabled and re-enabled both Hubs and am now up and running without the previous errors..
I used the "Discover Hubs" button which found both hubs, it was interesting to note that the previous hub Ids had dashes amongst the various alpha numeric (kind of MAC address style) the new update has both removed those dashes and the ID seems to have changed and is slightly longer - general observation, MikeComputer: CUK Intel NUC7i7BNH
Op System: Windows10 Pro - Work Station
HS Version: HS4 Pro Edition 4.2.19.0
Plug-Ins: AK Weather 4.0.5.25,APCUPSD 3.3.2.3,BLBackup 2.0.63.0,BLEditor 2.0.11.0,BLGData 3.0.55.0,BLOccupied 2.0.28.0,BLShutdown 1.0.6.0,Blue-Iris 3.1.3.33206,Device History 3.2.0.2,EasyTrigger 3.0.0.76,Harmony Hub 4.0.14.0,iRobot 5.22.41.1,JowiHue 4.0.8.7,Nest 3.0.0.34,NetCam Plugin 1.0.0.5,PHLocation2 3.0.0.64,Pushover 4.0.10.0,Random 3.0.0.2,Restart 1.0.0.7,Ring 1.0.0.9,SDJ-Health 3.1.1.3,Sonos 3.1.0.59,Sonos4 4.0.1.12,UltraCID3 3.0.6681.34300,UltraMon3 3.0.6554.33094,UltraNetCam3 3.0.6413.20219,Unifi 4.0.32.0,Zigbee 4.0.11.0,Z-Wave 4.0.3.0, and Jon00 scripts.
Comment
Comment