Originally posted by MNB
View Post
Announcement
Collapse
No announcement yet.
2/15/19 - New Firmware for Hubs available which may break plugin until you do this...
Collapse
This is a sticky topic.
X
X
-
My hubs finally updated to .250 and I loaded 3.1.0.12. I wound up deleting all my hubs and adding them again, but the PI had been dead for me since 206 rolled out, and I never bothered to update to 210. I had set the XMPP option to enabled in the Android app prior to the .250 upgrade and it was enabled after the upgrade.
Everything seems to be working, I controlled activities and devices on 2 of my 3 hubs. My wife was watching TV on the 3rd so I elected not to poke that bear I'm sure it's fine as well.
Nice to have everything back up and running, I have a few events in mind. My DirecTV Now App doesn't remember to select favorites when it starts on the Roku, I can set it programmatically now.
I can also setup some Alexa routines for selecting channels by voice. These IP based TV apps are a pain without channel numbers.
Comment
-
Originally posted by sirmeili View PostPlease note that you must be running 3.1.0.12 or later. 3.1.0.12 is currently in the Beta section of the Updater. Once a few people check it out and verify everything is working, I will release it as a production release.
Comment
-
After updating hub firmware to 4.15.250 and plugin to 3.1.0.12. connecting and sending commands to the hub from HomeSeer works again. Unfortunately that seems not the case for activity detection. Changing activity trough the remote does not get picked up by the plugin unless i manually disable/enable the plugin.
Downgrading the hub firmware back to .210 made activity detection (my main use for the plugin) work again.
Comment
-
Originally posted by Blob View PostAfter updating hub firmware to 4.15.250 and plugin to 3.1.0.12. connecting and sending commands to the hub from HomeSeer works again. Unfortunately that seems not the case for activity detection. Changing activity trough the remote does not get picked up by the plugin unless i manually disable/enable the plugin.
Downgrading the hub firmware back to .210 made activity detection (my main use for the plugin) work again.
Comment
-
Originally posted by Blob View PostAfter updating hub firmware to 4.15.250 and plugin to 3.1.0.12. connecting and sending commands to the hub from HomeSeer works again. Unfortunately that seems not the case for activity detection. Changing activity trough the remote does not get picked up by the plugin unless i manually disable/enable the plugin.
Downgrading the hub firmware back to .210 made activity detection (my main use for the plugin) work again.
Comment
-
So I downgraded my hubs to .210 and re-enable the firewall rules I had set to block internet access and prevent auto update. I am on plugin version 3.1.0.12 and everything seems to work as before, no HomeSeer Log errors. Something must have changed in hub firmware .250 Blocking internet access to the hubs is not ideal long term but at least it works for now!
Comment
-
I updated the beta but didn't have to do anything on the Harmony app. Seems to be working ok which is good because I constantly have issues with the phone app connecting to the hub. It's endless!!!HS4Pro Win10 | Fire Tablet touchscreen client, Android Phones and Tablets | Jon00 | Smartthings | Philips Hue | Trane | Caseta | Nanoleaf | Ring | August | Evolve | Aladdin | Amazon Alexa/IFTT
Comment
-
Originally posted by Mario23 View PostI updated the beta but didn't have to do anything on the Harmony app. Seems to be working ok which is good because I constantly have issues with the phone app connecting to the hub. It's endless!!!
Comment
-
Originally posted by DMT View PostSo I downgraded my hubs to .210 and re-enable the firewall rules I had set to block internet access and prevent auto update. I am on plugin version 3.1.0.12 and everything seems to work as before, no HomeSeer Log errors. Something must have changed in hub firmware .250 Blocking internet access to the hubs is not ideal long term but at least it works for now!
Comment
-
Originally posted by DMT View Post
I am testing now but I too believe there is something wrong relating to activities. Numerous errors in HomeSeer Log.
Comment
-
Originally posted by sirmeili View Post
Did you enable the XMPP communication in the phone app as described above? I also believe you need to do a sync afterwards (My hub did that automatically after enabling XMPP though)
Comment
-
Originally posted by sirmeili View Post
If possible can you turn on debug logging, reproduce the errors and send me the logs ([HS3 install dir]/Logs/MeiHarmonyHubYYYYMMDD.log (where YYYYMMDD is the date))
Comment
Comment