Cant connect to hub. Others are fine

[sirmeili]

Well I restated the plugin and now things seem to be fine?? Let you know if it changes Frank.

Thanks,

Bob

Had you tried a plugin restart before? (just curious)

[bobsilver1]

Well I restated the plugin and now things seem to be fine?? Let you know if it changes Frank.

Thanks,

Bob

[bobsilver1]

Powered cycle the hub for 12 hours. No change. XMPP is enabled.

Latest log errors

Sep-18 11:11:09 AM

Error

The Connection to Hub with ID cae6dcfac24930b9779207ea274bfb87806f48f0 failed with stack trace: at System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port) at HarmonyHub.Client.Connect(Int32 heartbeatInterval)

Sep-18 11:11:09 AM

Error

The Connection to Hub with ID cae6dcfac24930b9779207ea274bfb87806f48f0 failed with message: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.80:5222

Sep-18 11:10:54 AM

Z-Wave

Device: Z-Wave System Watts Set to 9.986 (9.986 Watts)

Sep-18 11:10:43 AM

Error

The Connection to Hub with ID cae6dcfac24930b9779207ea274bfb87806f48f0 failed with stack trace: at System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port) at HarmonyHub.Client.Connect(Int32 heartbeatInterval)

Sep-18 11:10:43 AM

Error

The Connection to Hub with ID cae6dcfac24930b9779207ea274bfb87806f48f0 failed with message: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.80:5222

[sirmeili]

Ensure XMPP is still enabled. If it is, I would do a long power cycle (like 30-60 minutes) of the hub. This generally solves it for me.

On My side I only seem to have the issue when some of my hubs are on one of my APs, but it's not always the case and it could have just be a coincidence.

[bobsilver1]

Hi Frank

Have 4 hubs 3 of which are fine. Have one hub I just cant connect to. See log errors below. Any suggestions?

Sep-16 10:36:55 AM

Z-Wave

Device: Z-Wave System Watts Set to 9.945 (9.945 Watts)

Sep-16 10:36:25 AM

Z-Wave

Device: Z-Wave System Watts Set to 9.904 (9.904 Watts)

Sep-16 10:36:24 AM

Device Control

Device: MeiHarmonyHub MeiHarmonyHub Office Hub Hub to Connect (1) by/from: CAPI Control Handler

Sep-16 10:36:14 AM

Error

The Connection to Hub with ID 1a25414d9a67277e783d2bd24376562b19a98cdd failed with stack trace: at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size) at HarmonyHub.Client.Send(String xml) at HarmonyHub.Client.OpenStream(Int32 heartbeatInterval) at HarmonyHub.Client.Connect(Int32 heartbeatInterval)

Sep-16 10:36:14 AM

Error

The Connection to Hub with ID 1a25414d9a67277e783d2bd24376562b19a98cdd failed with message: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host.

Sep-16 10:36:14 AM

Error

The Connection to Hub with ID 1a25414d9a67277e783d2bd24376562b19a98cdd failed with stack trace: at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size) at HarmonyHub.Client.Send(String xml)

Sep-16 10:36:14 AM

Error

The Connection to Hub with ID 1a25414d9a67277e783d2bd24376562b19a98cdd failed with message: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host.