I have a Sony Kd-43x80j 4k Ultra. The plugin does provide the status of Power, Audio Volume, Audio Mute, Channel, and Picture. These will also show status changes with no issue.
The web interface Sony "Input" field will show changes in the Sony TV of "TV" and "HDMI 1". "HDMI 2" and "HDMI 3" (not using HDMI 4) show "Unknown". Also, it takes about 30 seconds to show "Unknown", where "TV" and "HDMI 1" do so in under 5 seconds.
I am using Windows 10 on a HomeTroller Pro. TV connects to antenna. HDMI 1 connects to a DirecTV box. HDMI 2 connects to a Sony Blu-ray. HDMI 3 connects to an Apple TV 4K.
The web interface Sony "Input" field will show changes in the Sony TV of "TV" and "HDMI 1". "HDMI 2" and "HDMI 3" (not using HDMI 4) show "Unknown". Also, it takes about 30 seconds to show "Unknown", where "TV" and "HDMI 1" do so in under 5 seconds.
I am using Windows 10 on a HomeTroller Pro. TV connects to antenna. HDMI 1 connects to a DirecTV box. HDMI 2 connects to a Sony Blu-ray. HDMI 3 connects to an Apple TV 4K.
- I have removed and re-added the plugin.
- Rebooted/restarted the Sony TV multiple times.
- I have restarted HomeSeer multiple times.
- I changed the HDMI 2 and 3 configuration in the Sony TV to match HDMI 1.
- I looked up the Sony IP Control codes for HDMI 1 (10001), HDMI 2 (10002), and HDMI 3 (10003). These are used to display "Input" Status/Graphics. I have not been able to find that HDMI 2 and 3 have been change or use different codes through a web search.
- I can use the HomeSeer web interface "Input" buttons to turn on and off TV, HDMI 1, HDMI 2, and HDMI 3. The status then correctly shows TV or the correct HDMI port.
- I need the HDMI status to control other devices.
Comment