I just upgraded my PC running homeseer to windows 10. Everything in terms of homeseer has been pretty smooth during the upgrade, except for the UltraGCIR Plugin. The Thing is UltraGCIR never detects my gc-100 boxes anymore. When the computer was running 7, i never had issues. Now when running windows 10, it no longer detects any of my GC-100 Devices. I have the GC-100 set as static, and if i run iHelp they show under that. For that to work i have to have ultragcir disabled, or homeseer shutdown. What's wierd is that I am able to get everything working temporarily if i do the following:
With homeseer shut down, if i go to run iHelp the devices show up. I then shut down iHelp, then start homeseer back up, then after waiting for homeseer and the plugin to come back up, all GC-100's show up. Great! But if i restart homeseer or my pc, i am back to square 1 and nothing is detected under ultraGCIR. THe only way to get it back is by rerunning iHelp, while Homeseer is shutdown, then starting homeseer back up.
Just in case you're wondering i tried disabling the windows firewall, but that didn't help.
Here is my debug log when running UltraGCIR without starting iHelp.
Here is the log when Ihelp is ran, and afterwards i start homeseer back up
The other weird thing is that everything was working fine before i upgraded to 10, but i really can't understand why/if that really has anything to so with this issue. PLease help and Thank you.
With homeseer shut down, if i go to run iHelp the devices show up. I then shut down iHelp, then start homeseer back up, then after waiting for homeseer and the plugin to come back up, all GC-100's show up. Great! But if i restart homeseer or my pc, i am back to square 1 and nothing is detected under ultraGCIR. THe only way to get it back is by rerunning iHelp, while Homeseer is shutdown, then starting homeseer back up.
Just in case you're wondering i tried disabling the windows firewall, but that didn't help.
Here is my debug log when running UltraGCIR without starting iHelp.
Code:
5/24/2020 10:44:59 AM...HomeSeerV~~!~~3.0.0.548 5/24/2020 10:45:00 AM...HomeSeerL~~!~~True 5/24/2020 10:45:00 AM...HomeSeerU~~!~~0 Days 0 Hours 1 Minute 55 Seconds 5/24/2020 10:45:00 AM...Debug~~!~~Entered InitIO() function. 5/24/2020 10:45:00 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:00 AM...Informational~~!~~UltraGCIR3 version 3.0.6551.16959 initializing... 5/24/2020 10:45:00 AM...Debug~~!~~Entered InitializeMainDatabase() function. 5/24/2020 10:45:00 AM...Debug~~!~~Entered OpenDBConn() function. 5/24/2020 10:45:00 AM...Debug~~!~~Running SQLite database vacuum. 5/24/2020 10:45:00 AM...Debug~~!~~Database initialization complete. 5/24/2020 10:45:00 AM...Debug~~!~~Entered GetSetting() function. 5/24/2020 10:45:00 AM...Debug~~!~~Section: Settings, Key: Version, Value: 3.0.6551.16959 5/24/2020 10:45:00 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:00 AM...Debug~~!~~Table tblIRData exists. 5/24/2020 10:45:00 AM...Debug~~!~~Table tblGCDevices exists. 5/24/2020 10:45:00 AM...Debug~~!~~DiscoveryBeacon Thread Started 5/24/2020 10:45:00 AM...Debug~~!~~The GC discovery beacon routine has started ... 5/24/2020 10:45:00 AM...Informational~~!~~Adding to ignore list. 5/24/2020 10:45:00 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:00 AM...Informational~~!~~UltraGCIR3 version 3.0.6551.16959 initialization complete. 5/24/2020 10:45:42 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:45:42 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:45:42 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:45 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:45:45 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:45:45 AM...Debug~~!~~Entered postBackProc() function. 5/24/2020 10:45:46 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:45:46 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:45:46 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:46 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:45:46 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:45:46 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:47 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:45:47 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:45:47 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:48 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:45:48 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:45:48 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:45:51 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:45:51 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:45:51 AM...Debug~~!~~Entered postBackProc() function. 5/24/2020 10:46:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:46:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:46:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:46:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:46:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:46:13 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:46:14 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:46:14 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:48:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:48:13 AM...Debug~~!~~SetIOMulti set value: 159, type Values, ref:900 5/24/2020 10:49:10 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:49:10 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:49:10 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:49:14 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:49:14 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:49:14 AM...Debug~~!~~Entered postBackProc() function. 5/24/2020 10:49:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:49:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:49:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:49:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:49:34 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:49:34 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:49:34 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:49:34 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:52:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:52:53 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:52:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:52:53 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:52:53 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:52:53 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:52:53 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:52:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:52:53 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:52:54 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:52:54 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:52:54 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:52:54 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:52:54 AM...Debug~~!~~Entered Version() function. 5/24/2020 10:52:57 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 10:52:57 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 10:52:57 AM...Debug~~!~~Entered postBackProc() function. 5/24/2020 10:56:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:56:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:56:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:56:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:56:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:56:14 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:56:14 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:56:14 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:59:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:59:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:59:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:59:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 10:59:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:59:33 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 10:59:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 10:59:33 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:02:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:02:53 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:02:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:02:53 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:02:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:02:53 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:02:54 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:02:54 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:06:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:06:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:06:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:06:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:06:14 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:06:14 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:06:14 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:06:14 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:09:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:09:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:09:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:09:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:09:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:09:33 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:09:34 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:09:34 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:12:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:12:53 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:12:53 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:12:53 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:12:54 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:12:54 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:12:54 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:12:54 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:16:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:16:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:16:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:16:13 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:16:13 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:16:13 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:16:14 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:16:14 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:19:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:19:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:19:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:19:33 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:19:33 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:19:33 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:19:34 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:19:34 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169
Code:
5/24/2020 11:30:19 AM...HomeSeerV~~!~~3.0.0.548 5/24/2020 11:30:19 AM...HomeSeerL~~!~~True 5/24/2020 11:30:19 AM...HomeSeerU~~!~~0 Days 0 Hours 1 Minute 56 Seconds 5/24/2020 11:30:19 AM...Debug~~!~~Entered InitIO() function. 5/24/2020 11:30:19 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:19 AM...Informational~~!~~UltraGCIR3 version 3.0.6551.16959 initializing... 5/24/2020 11:30:19 AM...Debug~~!~~Entered InitializeMainDatabase() function. 5/24/2020 11:30:19 AM...Debug~~!~~Entered OpenDBConn() function. 5/24/2020 11:30:20 AM...Debug~~!~~Running SQLite database vacuum. 5/24/2020 11:30:20 AM...Debug~~!~~Database initialization complete. 5/24/2020 11:30:20 AM...Debug~~!~~Entered GetSetting() function. 5/24/2020 11:30:20 AM...Debug~~!~~Section: Settings, Key: Version, Value: 3.0.6551.16959 5/24/2020 11:30:20 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:20 AM...Debug~~!~~Table tblIRData exists. 5/24/2020 11:30:20 AM...Debug~~!~~Table tblGCDevices exists. 5/24/2020 11:30:20 AM...Debug~~!~~DiscoveryBeacon Thread Started 5/24/2020 11:30:20 AM...Debug~~!~~The GC discovery beacon routine has started ... 5/24/2020 11:30:20 AM...Informational~~!~~Adding to ignore list. 5/24/2020 11:30:20 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:20 AM...Informational~~!~~UltraGCIR3 version 3.0.6551.16959 initialization complete. 5/24/2020 11:30:33 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:33 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:33 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:36 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:36 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:36 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:37 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:37 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:37 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:38 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:38 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:38 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:39 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:39 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:39 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:40 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:40 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:40 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:40 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:40 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:40 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:41 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:41 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:41 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:42 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:42 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:42 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:42 AM...Informational~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.139] discovered. 5/24/2020 11:30:42 AM...Debug~~!~~ProcessCommandQueue Thread Started 5/24/2020 11:30:42 AM...Debug~~!~~WatchdogThread Thread Started 5/24/2020 11:30:42 AM...Debug~~!~~Attempting ethernet connection to 10.4.44.139:4998 ... 5/24/2020 11:30:42 AM...Informational~~!~~Ethernet connection established to 10.4.44.139:4998 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'getdevices' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with 'endlistdevices' for up to 2 seconds... 5/24/2020 11:30:42 AM...Informational~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.138] discovered. 5/24/2020 11:30:42 AM...Debug~~!~~ProcessCommandQueue Thread Started 5/24/2020 11:30:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:30:42 AM...Informational~~!~~Ethernet connection established to 10.4.44.138:4998 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'getdevices' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with 'endlistdevices' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,1,1 SERIAL', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found SERIAL module in position 1 containing 1 SERIAL devices. 5/24/2020 11:30:42 AM...Debug~~!~~ProcessCommandQueue Thread Started 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,2,1 SERIAL', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found SERIAL module in position 2 containing 1 SERIAL devices. 5/24/2020 11:30:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.139] sleeping for 30000. 5/24/2020 11:30:42 AM...Debug~~!~~Found RELAY module in position 3 containing 3 RELAY devices. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,4,3 IR', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found IR module in position 4 containing 3 IR devices. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,5,3 IR', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Informational~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.137] discovered. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'endlistdevices', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~ProcessReceived() reports: Found 'endlistdevices' in string 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000. 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'get_NET,0:1' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with '^NET' for up to 2 seconds... 5/24/2020 11:30:42 AM...Informational~~!~~Ethernet connection established to 10.4.44.137:4998 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,1,1 SERIAL', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found SERIAL module in position 1 containing 1 SERIAL devices. 5/24/2020 11:30:42 AM...Debug~~!~~ProcessCommandQueue Thread Started 5/24/2020 11:30:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:30:42 AM...Debug~~!~~Found SERIAL module in position 2 containing 1 SERIAL devices. 5/24/2020 11:30:42 AM...Debug~~!~~ProcessCommandQueue Thread Started 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,3,3 RELAY', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found RELAY module in position 3 containing 3 RELAY devices. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,4,3 IR', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found IR module in position 4 containing 3 IR devices. 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with 'endlistdevices' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~Found IR module in position 5 containing 3 IR devices. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'endlistdevices', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~ProcessReceived() reports: Found 'endlistdevices' in string 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Waited 78 milliseconds for the command response. 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'get_NET,0:1' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with '^NET' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'NET,0:1,UNLOCKED,DHCP,10.4.44.139,255.255.255.0,10.4.44.1', waiting for '^NET' 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,1,1 SERIAL', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Waited 104 milliseconds for the command response. 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,2,1 SERIAL', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found SERIAL module in position 2 containing 1 SERIAL devices. 5/24/2020 11:30:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,3,3 RELAY', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found RELAY module in position 3 containing 3 RELAY devices. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,4,3 IR', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Found IR module in position 4 containing 3 IR devices. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'device,5,3 IR', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 ETHERNET Module 0:1 device. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'endlistdevices', waiting for 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~ProcessReceived() reports: Found 'endlistdevices' in string 'endlistdevices' 5/24/2020 11:30:42 AM...Debug~~!~~Waited 79 milliseconds for the command response. 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'get_NET,0:1' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with '^NET' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'NET,0:1,UNLOCKED,DHCP,10.4.44.138,255.255.255.0,10.4.44.1', waiting for '^NET' 5/24/2020 11:30:42 AM...Debug~~!~~ProcessReceived() reports: Found '^NET' in string 'NET,0:1,UNLOCKED,DHCP,10.4.44.138,255.255.255.0,10.4.44.1' 5/24/2020 11:30:42 AM...Debug~~!~~Waited 104 milliseconds for the command response. 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 ETHERNET Module 0:1 device. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'NET,0:1,UNLOCKED,DHCP,10.4.44.137,255.255.255.0,10.4.44.1', waiting for '^NET' 5/24/2020 11:30:42 AM...Debug~~!~~ProcessReceived() reports: Found '^NET' in string 'NET,0:1,UNLOCKED,DHCP,10.4.44.137,255.255.255.0,10.4.44.1' 5/24/2020 11:30:42 AM...Debug~~!~~Waited 100 milliseconds for the command response. 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~GC004:0:1->1 5/24/2020 11:30:42 AM...Debug~~!~~Device address GC004:0:1 was found. 5/24/2020 11:30:42 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 ETHERNET Module 0:1 device. 5/24/2020 11:30:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.2-12', waiting for '.+' 5/24/2020 11:30:42 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.2-12' 5/24/2020 11:30:42 AM...Debug~~!~~Waited 140 milliseconds for the command response. 5/24/2020 11:30:42 AM...Debug~~!~~Sending command: 'get_SERIAL,1:1' to GC device, attempt # 1 5/24/2020 11:30:42 AM...Debug~~!~~Waiting for the GC device to respond with '^SERIAL' for up to 2 seconds... 5/24/2020 11:30:42 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:42 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:43 AM...Debug~~!~~GC003:0:1->1 5/24/2020 11:30:43 AM...Debug~~!~~Entered Version() function. 5/24/2020 11:30:43 AM...Debug~~!~~Device address GC003:0:1 was found. 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.0-12', waiting for '.+' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.0-12' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 169 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'get_SERIAL,1:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^SERIAL' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'SERIAL,1:1,19200,FLOW_NONE,PARITY_NO', waiting for '^SERIAL' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^SERIAL' in string 'SERIAL,1:1,19200,FLOW_NONE,PARITY_NO' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 136 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'get_SERIAL,2:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^SERIAL' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~Waited 164 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'get_SERIAL,1:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^SERIAL' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'SERIAL,1:1,19200,FLOW_NONE,PARITY_NO', waiting for '^SERIAL' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^SERIAL' in string 'SERIAL,1:1,19200,FLOW_NONE,PARITY_NO' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 109 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'get_SERIAL,2:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^SERIAL' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 SERIAL Module 1:1 device. 5/24/2020 11:30:43 AM...Debug~~!~~GC004:1:1->0 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'SERIAL,1:1,19200,FLOW_NONE,PARITY_NO', waiting for '^SERIAL' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^SERIAL' in string 'SERIAL,1:1,19200,FLOW_NONE,PARITY_NO' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 114 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'get_SERIAL,2:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^SERIAL' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~Device address GC004:1:1 was found. 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'SERIAL,2:1,9600,FLOW_NONE,PARITY_NO', waiting for '^SERIAL' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^SERIAL' in string 'SERIAL,2:1,9600,FLOW_NONE,PARITY_NO' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 216 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^state' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~GC003:1:1->0 5/24/2020 11:30:43 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 SERIAL Module 2:1 device. 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'SERIAL,2:1,9600,FLOW_NONE,PARITY_NO', waiting for '^SERIAL' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^SERIAL' in string 'SERIAL,2:1,9600,FLOW_NONE,PARITY_NO' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 228 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^state' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 SERIAL Module 2:1 device. 5/24/2020 11:30:43 AM...Debug~~!~~GC002:1:1->0 5/24/2020 11:30:43 AM...Debug~~!~~GC004:2:1->0 5/24/2020 11:30:43 AM...Debug~~!~~Device address GC002:1:1 was found. 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'state,3:1,0', waiting for '^state' 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:2' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^state' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~GC003:2:1->0 5/24/2020 11:30:43 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:43 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:43 AM...Debug~~!~~GC004:3:1->0 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^state' in string 'state,3:1,0' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 233 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:2' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^state' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~Device address GC004:3:1 was found. 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'state,3:2,0', waiting for '^state' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^state' in string 'state,3:2,0' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 115 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:3' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~GC003:3:1->0 5/24/2020 11:30:43 AM...Debug~~!~~GC002:2:1->0 5/24/2020 11:30:43 AM...Debug~~!~~GC004:3:2->0 5/24/2020 11:30:43 AM...Debug~~!~~Device address GC004:3:2 was found. 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'state,3:1,0', waiting for '^state' 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'state,3:2,0', waiting for '^state' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^state' in string 'state,3:1,0' 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'state,3:3,0', waiting for '^state' 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^state' in string 'state,3:2,0' 5/24/2020 11:30:43 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 RELAY Module 3:1 device. 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^state' in string 'state,3:3,0' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 272 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Waited 129 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'get_IR,4:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:2' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^state' for up to 2 seconds... 5/24/2020 11:30:43 AM...Debug~~!~~GC003:3:2->0 5/24/2020 11:30:43 AM...Debug~~!~~GC002:3:1->0 5/24/2020 11:30:43 AM...Debug~~!~~Device address GC002:3:1 was found. 5/24/2020 11:30:43 AM...Debug~~!~~GC004:3:3->0 5/24/2020 11:30:43 AM...Debug~~!~~Entered ProcessReceived() function with string 'state,3:3,0', waiting for '^state' 5/24/2020 11:30:43 AM...Debug~~!~~Waited 93 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Waited 97 milliseconds for the command response. 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'getstate,3:3' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~Sending command: 'get_IR,4:1' to GC device, attempt # 1 5/24/2020 11:30:43 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:1,IR' 5/24/2020 11:30:43 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 RELAY Module 3:2 device. 5/24/2020 11:30:43 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~GC003:3:3->0 5/24/2020 11:30:44 AM...Debug~~!~~GC002:3:2->0 5/24/2020 11:30:44 AM...Debug~~!~~Device address GC003:3:3 was found. 5/24/2020 11:30:44 AM...Debug~~!~~Device address GC002:3:2 was found. 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,4:1,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^state' in string 'state,3:3,0' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 105 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,4:1' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~GC004:4:1->0 5/24/2020 11:30:44 AM...Debug~~!~~Device address GC004:4:1 was found. 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:1 device. 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,4:2,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:2,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 162 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:2 device. 5/24/2020 11:30:44 AM...Debug~~!~~Entered SelectPage() Function 5/24/2020 11:30:44 AM...Debug~~!~~pageName=UltraGCIR3 5/24/2020 11:30:44 AM...Debug~~!~~GC002:3:3->0 5/24/2020 11:30:44 AM...Debug~~!~~Device address GC002:3:3 was found. 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,4:1,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:1,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 175 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,4:2' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~GC004:4:2->0 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:1 device. 5/24/2020 11:30:44 AM...Debug~~!~~GC003:4:1->0 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,4:3,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:3,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 238 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,5:1' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:3 device. 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,4:2,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:2,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 337 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,4:3' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:2 device. 5/24/2020 11:30:44 AM...Debug~~!~~GC004:4:3->0 5/24/2020 11:30:44 AM...Debug~~!~~Device address GC004:4:3 was found. 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,5:1,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:1,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 204 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,5:2' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~GC002:4:1->0 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:1 device. 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:2,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 373 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,4:3' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:2 device. 5/24/2020 11:30:44 AM...Debug~~!~~GC004:5:1->0 5/24/2020 11:30:44 AM...Debug~~!~~Device address GC004:5:1 was found. 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,5:2,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:2,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 271 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:2 device. 5/24/2020 11:30:44 AM...Debug~~!~~Device address GC003:4:2 was found. 5/24/2020 11:30:44 AM...Debug~~!~~GC002:4:2->0 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,4:3,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:3,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 521 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,5:1' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,4:3,IR', waiting for '^IR' 5/24/2020 11:30:44 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,4:3,IR' 5/24/2020 11:30:44 AM...Debug~~!~~Waited 331 milliseconds for the command response. 5/24/2020 11:30:44 AM...Debug~~!~~Sending command: 'get_IR,5:1' to GC device, attempt # 1 5/24/2020 11:30:44 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:3 device. 5/24/2020 11:30:44 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 4:3 device. 5/24/2020 11:30:45 AM...Debug~~!~~GC004:5:2->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC004:5:2 was found. 5/24/2020 11:30:45 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,5:3,IR', waiting for '^IR' 5/24/2020 11:30:45 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:3,IR' 5/24/2020 11:30:45 AM...Debug~~!~~Waited 187 milliseconds for the command response. 5/24/2020 11:30:45 AM...Debug~~!~~GC003:4:3->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC003:4:3 was found. 5/24/2020 11:30:45 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:3 device. 5/24/2020 11:30:45 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:1,IR' 5/24/2020 11:30:45 AM...Debug~~!~~Waited 186 milliseconds for the command response. 5/24/2020 11:30:45 AM...Debug~~!~~Sending command: 'get_IR,5:2' to GC device, attempt # 1 5/24/2020 11:30:45 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:45 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:1 device. 5/24/2020 11:30:45 AM...Debug~~!~~GC004:5:3->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC004:5:3 was found. 5/24/2020 11:30:45 AM...Debug~~!~~GC002:4:3->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC002:4:3 was found. 5/24/2020 11:30:45 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,5:1,IR', waiting for '^IR' 5/24/2020 11:30:45 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:1,IR' 5/24/2020 11:30:45 AM...Debug~~!~~Waited 381 milliseconds for the command response. 5/24/2020 11:30:45 AM...Debug~~!~~Sending command: 'get_IR,5:2' to GC device, attempt # 1 5/24/2020 11:30:45 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:45 AM...Debug~~!~~GC003:5:1->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC003:5:1 was found. 5/24/2020 11:30:45 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,5:2,IR', waiting for '^IR' 5/24/2020 11:30:45 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:2,IR' 5/24/2020 11:30:45 AM...Debug~~!~~Waited 336 milliseconds for the command response. 5/24/2020 11:30:45 AM...Debug~~!~~Sending command: 'get_IR,5:3' to GC device, attempt # 1 5/24/2020 11:30:45 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:45 AM...Debug~~!~~GC002:5:1->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC002:5:1 was found. 5/24/2020 11:30:45 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:2 device. 5/24/2020 11:30:45 AM...Debug~~!~~Waited 151 milliseconds for the command response. 5/24/2020 11:30:45 AM...Debug~~!~~Sending command: 'get_IR,5:3' to GC device, attempt # 1 5/24/2020 11:30:45 AM...Debug~~!~~Waiting for the GC device to respond with '^IR' for up to 2 seconds... 5/24/2020 11:30:45 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:2 device. 5/24/2020 11:30:45 AM...Debug~~!~~GC002:5:2->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC002:5:2 was found. 5/24/2020 11:30:45 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,5:3,IR', waiting for '^IR' 5/24/2020 11:30:45 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:3,IR' 5/24/2020 11:30:45 AM...Debug~~!~~Waited 152 milliseconds for the command response. 5/24/2020 11:30:45 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:3 device. 5/24/2020 11:30:45 AM...Debug~~!~~GC003:5:2->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC003:5:2 was found. 5/24/2020 11:30:45 AM...Debug~~!~~Entered ProcessReceived() function with string 'IR,5:3,IR', waiting for '^IR' 5/24/2020 11:30:45 AM...Debug~~!~~ProcessReceived() reports: Found '^IR' in string 'IR,5:3,IR' 5/24/2020 11:30:45 AM...Debug~~!~~Waited 287 milliseconds for the command response. 5/24/2020 11:30:45 AM...Debug~~!~~Updating existing HomeSeer GC-100-12 IR Module 5:3 device. 5/24/2020 11:30:45 AM...Debug~~!~~GC002:5:3->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC002:5:3 was found. 5/24/2020 11:30:45 AM...Debug~~!~~GC003:5:3->0 5/24/2020 11:30:45 AM...Debug~~!~~Device address GC003:5:3 was found. 5/24/2020 11:31:07 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.139] is alive. 5/24/2020 11:31:07 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.138] is alive. 5/24/2020 11:31:07 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.137] is alive. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.139] was received at 5/24/2020 11:30:45 AM. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.139] was received 27 seconds ago. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.139] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:31:12 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.138] was received at 5/24/2020 11:30:45 AM. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.138] was received 26 seconds ago. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.2-12', waiting for '.+' 5/24/2020 11:31:12 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.2-12' 5/24/2020 11:31:12 AM...Debug~~!~~Waited 84 milliseconds for the command response. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.139] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:31:12 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.139] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.137] was received at 5/24/2020 11:30:45 AM. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.137] was received 27 seconds ago. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:31:12 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.0-12', waiting for '.+' 5/24/2020 11:31:12 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.0-12' 5/24/2020 11:31:12 AM...Debug~~!~~Waited 98 milliseconds for the command response. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000. 5/24/2020 11:31:12 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.0-12', waiting for '.+' 5/24/2020 11:31:12 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.0-12' 5/24/2020 11:31:12 AM...Debug~~!~~Waited 69 milliseconds for the command response. 5/24/2020 11:31:12 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000. 5/24/2020 11:31:22 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.139] is alive. 5/24/2020 11:31:22 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.138] is alive. 5/24/2020 11:31:22 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.137] is alive. 5/24/2020 11:31:34 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:31:34 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:31:34 AM...Debug~~!~~Sending command: 'sendir,4:3,1,38000,1,1,340,170,21,63,21,63,21,21,21,21,21,21,21,21,21,21,21,63,21,63,21,21,21,63,21,21,21,63,21,21,21,63,21,21,21,63,21,21,21,21,21,21,21,63,21,21,21,21,21,63,21,21,21,63,21,63,21,63,21,21,21,63,21,63,21,21,21,1476' to GC device, attempt # 1 5/24/2020 11:31:34 AM...Debug~~!~~Waiting for the GC device to respond with '^completeir' for up to 2 seconds... 5/24/2020 11:31:34 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:31:34 AM...Debug~~!~~SetIOMulti set value: 851, type Values, ref:923 5/24/2020 11:31:34 AM...Debug~~!~~Entered ProcessReceived() function with string 'completeir,4:3,1', waiting for '^completeir' 5/24/2020 11:31:34 AM...Debug~~!~~ProcessReceived() reports: Found '^completeir' in string 'completeir,4:3,1' 5/24/2020 11:31:34 AM...Debug~~!~~Waited 192 milliseconds for the command response. 5/24/2020 11:31:34 AM...Debug~~!~~Sending command: 'sendir,4:3,1,38000,1,1,340,170,21,63,21,63,21,21,21,21,21,21,21,21,21,21,21,63,21,63,21,21,21,63,21,21,21,63,21,21,21,63,21,21,21,63,21,21,21,21,21,21,21,63,21,21,21,21,21,63,21,21,21,63,21,63,21,63,21,21,21,63,21,63,21,21,21,1476' to GC device, attempt # 1 5/24/2020 11:31:34 AM...Debug~~!~~Waiting for the GC device to respond with '^completeir' for up to 2 seconds... 5/24/2020 11:31:34 AM...Debug~~!~~Entered ProcessReceived() function with string 'completeir,4:3,1', waiting for '^completeir' 5/24/2020 11:31:34 AM...Debug~~!~~ProcessReceived() reports: Found '^completeir' in string 'completeir,4:3,1' 5/24/2020 11:31:34 AM...Debug~~!~~Waited 201 milliseconds for the command response. 5/24/2020 11:31:35 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:31:35 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:31:35 AM...Debug~~!~~Sending command: 'sendir,4:1,1,37993,1,1,342,171,22,21,22,64,22,21,22,21,22,64,22,64,22,21,22,21,22,64,22,21,22,64,22,64,22,21,22,21,22,64,22,64,22,21,22,64,22,64,22,64,22,21,22,64,22,21,22,21,22,64,22,21,22,21,22,21,22,64,22,21,22,64,22,64,22,1487,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631' to GC device, attempt # 1 5/24/2020 11:31:35 AM...Debug~~!~~Waiting for the GC device to respond with '^completeir' for up to 2 seconds... 5/24/2020 11:31:35 AM...Debug~~!~~Entered SetIOMulti Subroutine 5/24/2020 11:31:35 AM...Debug~~!~~SetIOMulti set value: 1036, type Values, ref:1169 5/24/2020 11:31:36 AM...Debug~~!~~Entered ProcessReceived() function with string 'completeir,4:1,1', waiting for '^completeir' 5/24/2020 11:31:36 AM...Debug~~!~~ProcessReceived() reports: Found '^completeir' in string 'completeir,4:1,1' 5/24/2020 11:31:36 AM...Debug~~!~~Waited 1196 milliseconds for the command response. 5/24/2020 11:31:36 AM...Debug~~!~~Sending command: 'sendir,4:1,1,37993,1,1,342,171,22,21,22,64,22,21,22,21,22,64,22,64,22,21,22,21,22,64,22,21,22,64,22,64,22,21,22,21,22,64,22,64,22,21,22,64,22,64,22,64,22,21,22,64,22,21,22,21,22,64,22,21,22,21,22,21,22,64,22,21,22,64,22,64,22,1487,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631,342,85,22,3631' to GC device, attempt # 1 5/24/2020 11:31:36 AM...Debug~~!~~Waiting for the GC device to respond with '^completeir' for up to 2 seconds... 5/24/2020 11:31:37 AM...Debug~~!~~Entered ProcessReceived() function with string 'completeir,4:1,1', waiting for '^completeir' 5/24/2020 11:31:37 AM...Debug~~!~~ProcessReceived() reports: Found '^completeir' in string 'completeir,4:1,1' 5/24/2020 11:31:37 AM...Debug~~!~~Waited 1211 milliseconds for the command response. 5/24/2020 11:31:41 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.139] is alive. 5/24/2020 11:31:41 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.138] is alive. 5/24/2020 11:31:41 AM...Debug~~!~~DiscoveryBeacon: Global Cache unit GC-100-12 [10.4.44.137] is alive. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.139] was received at 5/24/2020 11:31:37 AM. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.139] was received 5 seconds ago. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.139] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:31:42 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.138] was received at 5/24/2020 11:31:34 AM. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.138] was received 7 seconds ago. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.2-12', waiting for '.+' 5/24/2020 11:31:42 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.2-12' 5/24/2020 11:31:42 AM...Debug~~!~~Waited 58 milliseconds for the command response. 5/24/2020 11:31:42 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:31:42 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.139] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.139] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.137] was received at 5/24/2020 11:31:12 AM. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer indicates a response from the Global Cache device [10.4.44.137] was received 29 seconds ago. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Sending command: 'getversion' to GC device, attempt # 1 5/24/2020 11:31:42 AM...Debug~~!~~Waiting for the GC device to respond with '.+' for up to 2 seconds... 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.138] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.0-12', waiting for '.+' 5/24/2020 11:31:42 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.0-12' 5/24/2020 11:31:42 AM...Debug~~!~~Waited 92 milliseconds for the command response. 5/24/2020 11:31:42 AM...Debug~~!~~Entered ProcessReceived() function with string 'version,0,3.0-12', waiting for '.+' 5/24/2020 11:31:42 AM...Debug~~!~~ProcessReceived() reports: Found '.+' in string 'version,0,3.0-12' 5/24/2020 11:31:42 AM...Debug~~!~~Waited 85 milliseconds for the command response. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000. 5/24/2020 11:31:42 AM...Debug~~!~~Watchdog Timer thread for the Global Cache device [10.4.44.137] sleeping for 30000.
Comment