Missing Codes

[gearyt]

looks like that was it.. will finish config when you are ready for HS3

[gearyt]

Okay, I think I found the issue. The IR codes you provided appear to be the output of the iConvert program. You'll need to use the Global Cache iLearn program, then save those results to a file so they can be imported.

In order to resolve this issue, you can simply copy the output from iConvert into the Edit View text area of the iLearn program, then enter the button name, then click "Save Data". Repeat this process until all buttons are converted, then click "New File" to save the file so it can be imported into the UltraGCIR HSPI. You could also try to change "<mod-addr>:<conn-addr>" to 1:1 and <repeatcount> to 1.

I'll look into detecting the output from iConvert so others don't have to struggle with this. Sorry for not noticing earlier.

Regards,
Ultrajones

Thanks.. have a long week-end, will get a chance to play.. How close are you to HS3... I have it up and LOVE it...

[Ultrajones]

Okay, I think I found the issue. The IR codes you provided appear to be the output of the iConvert program. You'll need to use the Global Cache iLearn program, then save those results to a file so they can be imported.

In order to resolve this issue, you can simply copy the output from iConvert into the Edit View text area of the iLearn program, then enter the button name, then click "Save Data". Repeat this process until all buttons are converted, then click "New File" to save the file so it can be imported into the UltraGCIR HSPI. You could also try to change "<mod-addr>:<conn-addr>" to 1:1 and <repeatcount> to 1.

I'll look into detecting the output from iConvert so others don't have to struggle with this. Sorry for not noticing earlier.

Regards,
Ultrajones

[gearyt]

really simple.. just trying to get any button to work to the new DirecTV receiver.. If you can give me the code for example a "1', I can probably figure out what i am doing wrong..

see may 18th post above ( removed the / )

[Ultrajones]

Please provide the IR export for the IR device you are having a problem with along with the GC-100-12 firmware version and a detailed explanation of the problem so I can attempt to duplicate the issue.

Regards,
Ultrajones

[gearyt]

error code

still working it... this is the error i now get

[gearyt]

got to be something simple... all do the same
back to the RTFM mode..

[gearyt]

not the problem...

[gearyt]

see the post above it.. it was a cut and paste job.. will check to see if all got copied
thanks

Geary

[Ultrajones]

Why is there a "\" in the IR code section of the entry?

[gearyt]

here's "0"

from file..

[DTV - 0] sendir,<mod-addr>:<conn-addr>,13,39000,<repeatcount>,1,232,46,46,46,23,23,23,23,23,4 6,23,23,23,46,23,46,46,23,23,1155,116,44\,46,23,23,46,23,23, 23,23,23,23,23,46,46,46,23,23,46

here's log..

[gearyt]

Setting up events, I find that codes are missing from the drop-down list
Example "Enter".. it shows in the IR Code, but it is not on the drop-down