Great, thanks. My system is running Windows.
Announcement
Collapse
No announcement yet.
UltraHTDAudio3 HSPI for HomeSeer3
Collapse
X
-
Originally posted by julietalpha View PostGreat, thanks. My system is running Windows.
Regards,
UltrajonesPlug-ins: UltraMon, UltraM1G, UltraCID, Ultra1Wire, UltraLog, UltraWeatherBug, UltraPioneerAVR, UltraGCIR
Comment
-
Guest
Hi. Trying this for the first time and not particularly savvy. How can I find out what port the gateway is on? I can find the IP address by logging into my router, but can't find what port it is on... Any guidance will be greatly appreciated.
Comment
-
Originally posted by newbiehomeaudio View PostHi. Trying this for the first time and not particularly savvy. How can I find out what port the gateway is on? I can find the IP address by logging into my router, but can't find what port it is on... Any guidance will be greatly appreciated.
Let me know if that helps.
Comment
-
I'm running version 3.0.6922.16287 with my MC66 and one area in dire need of improvement is volume settings, both discrete and muting. I'd like to send "35" to the controller and have it set properly. Right now, I can only send volume up and volume down, which is pretty useless in events and scripts.
As for muting, there seems to be a single command for toggle with some status workarounds. This makes it difficult to use a real on/off toggle because HS expects a different command for each.
Any idea if these issues will be addressed?
Thanks, and keep up the great work!
Comment
-
Originally posted by zymurgist View PostI'm running version 3.0.6922.16287 with my MC66 and one area in dire need of improvement is volume settings, both discrete and muting. I'd like to send "35" to the controller and have it set properly. Right now, I can only send volume up and volume down, which is pretty useless in events and scripts.
As for muting, there seems to be a single command for toggle with some status workarounds. This makes it difficult to use a real on/off toggle because HS expects a different command for each.
Any idea if these issues will be addressed?
Thanks, and keep up the great work!Plug-ins: UltraMon, UltraM1G, UltraCID, Ultra1Wire, UltraLog, UltraWeatherBug, UltraPioneerAVR, UltraGCIR
Comment
-
I too was sent here by HTD for connecting my MC-66 with Homeseer. My goal is to turn on zones, change sources and adjust volume with Alexa.
Is everyone still pleased with the controls and using it with Alexa (through HomeSeer)? I currently have an old HTDNET interface (from 2014) that I will be replacing with the GW-SL1 unless I have other options that you guys recommend?
Comment
-
Previous posts in the thread seem to indicate it works well with the MC-66. I recommend installing the plug-in with a trial and testing it.
My experience with this plugin pas been great, but I have it in use with a Lync 12 system. Very reliable and full featured in that case, for what it's worth.
Comment
-
Originally posted by harshl View PostPrevious posts in the thread seem to indicate it works well with the MC-66. I recommend installing the plug-in with a trial and testing it.
My experience with this plugin pas been great, but I have it in use with a Lync 12 system. Very reliable and full featured in that case, for what it's worth.
Comment
-
Originally posted by SLOWBRA View Post
You are correct. I’ll likely try it like you say and see how it performs. I do see at least one post looking for improvements, which I hope will continue to be made (through the api and developer ok here who said he would look into it) although there hasn’t been much talk since my post earlier this year.
Comment
Comment