Announcement
Collapse
No announcement yet.
VSX-1121 Problem
Collapse
X
-
Thanks, that did the trick - don't know how I missed that screen while doing the setup.
-
You need to configure the AVR to always accept telnet connections even when the AVR is powered off (plugged in but power toggled off). There is a menu setting to set it. That will fix at least some of those logs from popping up.
The ?P thing... I'd learn to live with that log...
Leave a comment:
-
VSX-1121 Problem
Hi, I purchased a new VSX-1121 when the getting was good and now trying out this plug-in.
Having problems keeping things operating properly - see error below
4/14/2012 8:45:57 AM UltraPioneerAVR Warning No response/improper response from Pioneer AVR device '192.168.1.37:23' to command '?P'. Your Pioneer AVR may not support the feature 'Power'.
4/14/2012 8:46:01 AM UltraPioneerAVR Warning No response/improper response from Pioneer AVR device '192.168.1.37:23' to command '?P'. Your Pioneer AVR may not support the feature 'Power'.
4/14/2012 8:46:32 AM UltraPioneerAVR Error An unexpected error occured in the SendMessageToEthernet() function/subroutine: [System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. --- System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size) --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size) at HSPI_ULTRAPAVR.PioneerAVR.SendMessageToEthernet(String Message)]
4/14/2012 8:46:35 AM UltraPioneerAVR Warning Ignoring command '?P' because the Pioneer AVR device '192.168.1.37:23' is not connected.
4/14/2012 8:46:36 AM UltraPioneerAVR Warning No response/improper response from Pioneer AVR device '192.168.1.37:23' to command '?P'. Your Pioneer AVR may not support the feature 'Power'.
4/14/2012 8:46:38 AM UltraPioneerAVR Warning Ignoring command '?P' because the Pioneer AVR device '192.168.1.37:23' is not connected.
4/14/2012 8:47:11 AM UltraPioneerAVR Warning Watchdog Timer indicates Connection to Pioneer AVR device '192.168.1.37:23' was lost.. Attempting to reconnect ...
4/14/2012 8:47:32 AM UltraPioneerAVR Warning Watchdog Timer reconnect attempt failed.
If anyone knows what the problem might be or what I may be doing wrong I would welcome some help. Thx in advance.....Tags: None
Leave a comment: