Using 1.1.4561.15275 against an SC-1222 over Ethernet.
Any attempt to change the tuner frequency just doesn't seem to work. Here's the debug log attempting to change to 100.60
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Processing Tuner Function command TunerDirectAccessSet.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Sending command 'TAC1TP0TP0TP6TP0TP' to Pioneer AVR device '192.168.200.12:23', waiting for response ''.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Sending command 'TAC1TP0TP0TP6TP0TP' to Pioneer AVR device '192.168.200.12:23', attempt #1.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Entered SendToPAVR() function.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Sending 'TAC1TP0TP0TP6TP0TP' to Pioneer AVR device '192.168.200.12:23' via Ethernet.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Command TAC1TP0TP0TP6TP0TP does not produce a result.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Data 'E02' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:00 PM - UltraPioneerAVR Wa - Pioneer AVR device [192.168.200.12:23] rejected the command due to 'unknown reason'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'FL025A323A423120464D2038372E3530' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Pioneer AVR device '192.168.200.12:23' Panel Display=Z2:B1 FM 87.50
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'E02' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR Wa - Pioneer AVR device [192.168.200.12:23] rejected the command due to 'unknown reason'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'E02' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR Wa - Pioneer AVR device [192.168.200.12:23] rejected the command due to 'unknown reason'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'FL025A323A423620464D2038372E3530' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Pioneer AVR device '192.168.200.12:23' Panel Display=Z2:B6 FM 87.50
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'PRB06' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
Is this a known issue with the UltraPioneerAVR plugin, or am I missing something?
Many thanks,
John.
Any attempt to change the tuner frequency just doesn't seem to work. Here's the debug log attempting to change to 100.60
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Processing Tuner Function command TunerDirectAccessSet.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Sending command 'TAC1TP0TP0TP6TP0TP' to Pioneer AVR device '192.168.200.12:23', waiting for response ''.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Sending command 'TAC1TP0TP0TP6TP0TP' to Pioneer AVR device '192.168.200.12:23', attempt #1.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Entered SendToPAVR() function.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Sending 'TAC1TP0TP0TP6TP0TP' to Pioneer AVR device '192.168.200.12:23' via Ethernet.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Command TAC1TP0TP0TP6TP0TP does not produce a result.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Data 'E02' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:00 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:00 PM - UltraPioneerAVR Wa - Pioneer AVR device [192.168.200.12:23] rejected the command due to 'unknown reason'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'FL025A323A423120464D2038372E3530' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Pioneer AVR device '192.168.200.12:23' Panel Display=Z2:B1 FM 87.50
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'E02' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR Wa - Pioneer AVR device [192.168.200.12:23] rejected the command due to 'unknown reason'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'E02' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR Wa - Pioneer AVR device [192.168.200.12:23] rejected the command due to 'unknown reason'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'FL025A323A423620464D2038372E3530' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Expected command response ' []' received from Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Pioneer AVR device '192.168.200.12:23' Panel Display=Z2:B6 FM 87.50
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Data 'PRB06' sent by Pioneer AVR device '192.168.200.12:23'.
12/9/2012 1:43:01 PM - UltraPioneerAVR De - Entered ProcessCommand() function.
PHP Code:
The documentation I have from Pioneer for the TAC command indicates there should be a <CR> between each of the numbers, for example quoting from their PDF "Command: TAC<CR>8TP<CR>7TP<CR>5T P<CR>0TP<CR> (87.50MHz direct set"
Many thanks,
John.
Comment