V2.x is a complete re-write of the original script and is one third the size of the original.
Functions, options, etc. are described in the included documentation.
Discussion here please:
http://board.homeseer.com/showthread...845#post991845
NOTE: v2.5.1 is functionally identical to v2.5 but will work with earlier versions of Homeseer which did not support the hs.Transmitfunction.
Future versions will use hs.ExecX10until this function is fully removed from current versions of Homeseer.
v2.6
Incorporates the ExecX10 modification from 2.5.1
Fixes a problem with the Device Status of the Current UpTime device.
Adds optional color to the device strings of all configured devices. Description in the included documentation.
v2.7
There is a Homeseer option to store logs in the HS root directory. This version takes that into account.
2.8
Fixed a bug where the main routine might run via the event before HS has completed running the Startup.txt script, resulting in corruption of the existing data.
Added optional device for MTBF (Mean Time Between Failure). This is the average of faulted run times and is separate from the Average RunTime Device.
This script can be copied to the \Scripts directory without restarting HS if you are currently running v2.6 or later.
If you want to use the MTBF device simply add the key MTBFDC to the configuration section of the INI (description is in the documentation). The device will be created on the next restart.
2.9
Added some protection against the data section of the configuration being edited incorrectly.
HS3 Version HS3 v1.1
Conversion to HS3
Dec 01/2014 There was an error in the documentation. Corrected.
2.91 HS2 & HS3
Minor changes to the script.
In HS3, if using the Uptime History log, a date wasn't being updated.
Synchronized version numbers for both HS2 & HS3
Removed the data from the CurrentTime field in the config file. This might have caused problems on initial run of the script after a fresh install on some systems. My bad.
Converted the Doc file to PDF.
2.92 HS2 & HS3 2014-12-13
Added optional device graphics.
Run event is now automatically created, alleviating some of the installation confusion. See the Read Before Running text in the ZIP root.
HS3 Devices are now associated with one another, providing grouping on the Device Management page.
2.12.2
Device and Event creation are optional. See the PDF documentation.
2.12.5
Added an option to display times in devices in short form. D HH:MM:SS
To upgrade:
- Replace the VBEN file in the scripts folder.
- Add parameter ShortTime to Configuration, and set to True to use the short form, or False to use the original Long form.
2.13.1
See Discussion thread.
No other changes.
Times will be converted when the individual devices are updated. Instructions in the Doc if immediate conversion is preferred.
Functions, options, etc. are described in the included documentation.
Discussion here please:
http://board.homeseer.com/showthread...845#post991845
NOTE: v2.5.1 is functionally identical to v2.5 but will work with earlier versions of Homeseer which did not support the hs.Transmitfunction.
Future versions will use hs.ExecX10until this function is fully removed from current versions of Homeseer.
v2.6
Incorporates the ExecX10 modification from 2.5.1
Fixes a problem with the Device Status of the Current UpTime device.
Adds optional color to the device strings of all configured devices. Description in the included documentation.
v2.7
There is a Homeseer option to store logs in the HS root directory. This version takes that into account.
2.8
Fixed a bug where the main routine might run via the event before HS has completed running the Startup.txt script, resulting in corruption of the existing data.
Added optional device for MTBF (Mean Time Between Failure). This is the average of faulted run times and is separate from the Average RunTime Device.
This script can be copied to the \Scripts directory without restarting HS if you are currently running v2.6 or later.
If you want to use the MTBF device simply add the key MTBFDC to the configuration section of the INI (description is in the documentation). The device will be created on the next restart.
2.9
Added some protection against the data section of the configuration being edited incorrectly.
HS3 Version HS3 v1.1
Conversion to HS3
Dec 01/2014 There was an error in the documentation. Corrected.
2.91 HS2 & HS3
Minor changes to the script.
In HS3, if using the Uptime History log, a date wasn't being updated.
Synchronized version numbers for both HS2 & HS3
Removed the data from the CurrentTime field in the config file. This might have caused problems on initial run of the script after a fresh install on some systems. My bad.
Converted the Doc file to PDF.
2.92 HS2 & HS3 2014-12-13
Added optional device graphics.
Run event is now automatically created, alleviating some of the installation confusion. See the Read Before Running text in the ZIP root.
HS3 Devices are now associated with one another, providing grouping on the Device Management page.
2.12.2
Device and Event creation are optional. See the PDF documentation.
2.12.5
Added an option to display times in devices in short form. D HH:MM:SS
To upgrade:
- Replace the VBEN file in the scripts folder.
- Add parameter ShortTime to Configuration, and set to True to use the short form, or False to use the original Long form.
2.13.1
See Discussion thread.
No other changes.
Times will be converted when the individual devices are updated. Instructions in the Doc if immediate conversion is preferred.
Comment