Fronius Device Issue, Your Data card is not on 0 or 1, Please contact Mat Budden....

[Dani-75]

Hi Mat

I installed your Plugin in trial mode and wanted to connect it to my Fronius Symo Gen24 inverter. HS Devices have been successfully created but are all showing value 0, The log shows the following:

12.04.2020 23:22:27 Legacy-Plugin Fronius Symo Fronius Device Issue, Your Data card is not on 0 or 1, Please contact Mat Budden on the forums.
12.04.2020 23:22:27 Legacy-Plugin Fronius Symo Fronius Device Issue, Your Data card is not on 0 or 1, Please contact Mat Budden on the forums.
12.04.2020 23:22:16 HomeSeer Starting Plug-In Plugin Fronius Symo started successfully in 36 milliseconds
12.04.2020 23:22:16 Legacy-Plugin Fronius Symo Checking for devices owned by Fronius Symo
12.04.2020 23:22:16 Legacy-Plugin Fronius Symo InitIO called, plug-in is being initialized...
12.04.2020 23:22:16 HomeSeer Starting Plug-In Initializing plugin Fronius Symo ...
12.04.2020 23:22:16 HomeSeer Info Plugin Fronius Symo has connected. IP:127.0.0.1:56371
12.04.2020 23:22:16 HomeSeer Plug-In Finished initializing plug-in Fronius Symo
12.04.2020 23:22:16 HomeSeer Plug-In Interface Fronius Symo is running as a trial, 23 days remaining.

I have a Fronius Symo Gen24 10.0 Plus and a Fronius Smart Meter connected between grid and inverter.

Many thanks for your help.

Regards
Dani

[Mat_Budden]

Hi Dani,

Apologies for the delay, I will likely need to debug this locally, If you have time i can log in over teamviewer? or give you some commands to run in your browser that will give me the info i need to work out whats happening. Please let me know which you prefer.

I am in between houses at the minute so may have limited time, but will try and assist asap.

Thanks
Mat