Hi,
I'm new to this Alexa interface and I'm trying to get all my devices beign found by Alexa. At this point, it seems to find most of the switch and dimmers but it only detects 2 of the 8 Stelpro Thermostat that I have set in my system.
Looking at the devices in HS3, they all seems to look alike but only my "thermostat bureau" and "thermostat sous-sol" are detected
Is there a way to force devices to be detected by Alexa ?
here is my system setup
Current Date/Time: 17-11-17 06:40:14 Est
HomeSeer Version: HS3 Pro Edition 3.0.0.368 (Windows)
HomeSeer: Is Registered
Operating System: Microsoft Windows 10 Famille - Work Station
OS Version: 10.0.14393 Service Pack: 0.0
System Uptime: 7 Days 0 Hours 22 Minutes 23 Seconds
User Name and Access Level:
LAN IP Address: X.X.X.X (serveur-hp)
Client IP Address: X.X.X.X (surface-bruno)
External IP Address: X.X.X.X
Network Adapter: Adapter -> Realtek PCIe GBE Family Controller IP: 192.168.1.70/24 MAC: C0:7C1:A2:18:20
Network Adapter: HomeSeer Adapter -> Loopback Address (localhost) IP: 127.0.0.1
Web Server Port: 80
Number of Devices: 573
Number of Events: 213
Event Last Ran: Events qui activent des parametres : Geofency detecte Nicole home = switch Nicole Home = ON, Ran at 17-11-17 06:36:15
Number of unique event scripts used: 1
Connected Speaker Clients: SERVEUR-HP (127.0.0.1)EFAULT
Plug-Ins Enabled: BLCpuAdvisor:,Z-Wave:,UltraNetCam3:,Sonos:,Pushover 3P:,PHLocation:,ImperiHome:,Honeywell WiFi Thermostat:,Homekit bridge:,Harmony Hub:,EnvisaLink:,EnvCan:,Blue-Iris:,BLLogMonitor:,UltraWeatherWU3:,BLBackup:
Processor Type and Speed: Intel64 Family 6 Model 60 Stepping 3 at 2,52 GHz
Modules/Threads: 153 Modules, 163 Threads
Available Threads: 800
System Processes/Load: 162 Processes, 0% Load
Free / Total Physical Memory: 3,60 GBytes / 7,93 GBytes (45% free)
Free / Total Virtual Memory: 3,98 GBytes / 9,18 GBytes (43% free)
HomeSeer Memory Used: 99 Mbytes
Plug-In Memory Used: 16 EXE Plug-Ins using 399 Mbytes
I'm new to this Alexa interface and I'm trying to get all my devices beign found by Alexa. At this point, it seems to find most of the switch and dimmers but it only detects 2 of the 8 Stelpro Thermostat that I have set in my system.
Looking at the devices in HS3, they all seems to look alike but only my "thermostat bureau" and "thermostat sous-sol" are detected
Is there a way to force devices to be detected by Alexa ?
here is my system setup
Current Date/Time: 17-11-17 06:40:14 Est
HomeSeer Version: HS3 Pro Edition 3.0.0.368 (Windows)
HomeSeer: Is Registered
Operating System: Microsoft Windows 10 Famille - Work Station
OS Version: 10.0.14393 Service Pack: 0.0
System Uptime: 7 Days 0 Hours 22 Minutes 23 Seconds
User Name and Access Level:
LAN IP Address: X.X.X.X (serveur-hp)
Client IP Address: X.X.X.X (surface-bruno)
External IP Address: X.X.X.X
Network Adapter: Adapter -> Realtek PCIe GBE Family Controller IP: 192.168.1.70/24 MAC: C0:7C1:A2:18:20
Network Adapter: HomeSeer Adapter -> Loopback Address (localhost) IP: 127.0.0.1
Web Server Port: 80
Number of Devices: 573
Number of Events: 213
Event Last Ran: Events qui activent des parametres : Geofency detecte Nicole home = switch Nicole Home = ON, Ran at 17-11-17 06:36:15
Number of unique event scripts used: 1
Connected Speaker Clients: SERVEUR-HP (127.0.0.1)EFAULT
Plug-Ins Enabled: BLCpuAdvisor:,Z-Wave:,UltraNetCam3:,Sonos:,Pushover 3P:,PHLocation:,ImperiHome:,Honeywell WiFi Thermostat:,Homekit bridge:,Harmony Hub:,EnvisaLink:,EnvCan:,Blue-Iris:,BLLogMonitor:,UltraWeatherWU3:,BLBackup:
Processor Type and Speed: Intel64 Family 6 Model 60 Stepping 3 at 2,52 GHz
Modules/Threads: 153 Modules, 163 Threads
Available Threads: 800
System Processes/Load: 162 Processes, 0% Load
Free / Total Physical Memory: 3,60 GBytes / 7,93 GBytes (45% free)
Free / Total Virtual Memory: 3,98 GBytes / 9,18 GBytes (43% free)
HomeSeer Memory Used: 99 Mbytes
Plug-In Memory Used: 16 EXE Plug-Ins using 399 Mbytes
Comment