Announcement

Collapse
No announcement yet.

HS4 + Wyze device control using Node-RED (Plugs, Bulbs, Cameras) - ON/OFF/State

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dev120v
    replied
    Originally posted by rmiles7721 View Post
    I've got my credentials set up in the wyze config node and I can see the virtual HS node receive on/off from HS4 but when I use the inject node to get my wyze devices nothing shows up in the debug window. Any ideas?
    Sorry not sure. I updated my wyze cams to the dafang firmware so I can't use this anymore

    Leave a comment:


  • rmiles7721
    replied
    I've got my credentials set up in the wyze config node and I can see the virtual HS node receive on/off from HS4 but when I use the inject node to get my wyze devices nothing shows up in the debug window. Any ideas?

    Leave a comment:


  • rmiles7721
    replied
    Awesome. I just ordered a couple of outdoor plugs from Wyze to play with that should be here next week. Will be nice to integrate with HS.

    Leave a comment:


  • HS4 + Wyze device control using Node-RED (Plugs, Bulbs, Cameras) - ON/OFF/State

    HS4 + Wyze device control using Node-RED (Plugs, Bulbs, Cameras) - ON/OFF/State

    I have been playing around with Node-RED and I got HS4 connected to my Wyze cams (this will also work for Wyze plugs and bulbs... maybe locks)

    This is just a basic setup to use an HS4 virtual device to turn On/Off Wyze devices. (This setup uses the Wyze app API, it is not local control). You can only get the status from Wyze by request. Wyze will not update HS4 on change, you would need to periodically check the state of Wyze and update HS4

    The 3 main node red component are
    https://flows.nodered.org/node/node-...ntrib-homeseer
    https://www.npmjs.com/package/wyze-node
    https://flows.nodered.org/node/node-red-contrib-config

    Step 1

    Install Node Red and Setup with HS4
    https://forums.homeseer.com/forum/ho...pported-by-hs4
    https://docs.homeseer.com/display/HS...r+use+with+HS4

    Step 2

    Install the unofficial wyze api for node red. (wyze-node is currently not part of the libraries, so you need to add it as an external third party library)

    run the following command: (navigate to nodered folder first if you want.... cd ~/.node-red )
    npm install wyze-node --save

    wyze-node is using an old version of axios, so you will want to update that. Open the wyze-node folder that was just created

    1) in the wyze-node folder, delete the node-modules folder
    2) edit the package.json to read....
    "dependencies": {
    "axios": "^0.21.1",

    3) run command: npm install
    4) run command: npm audit fix
    5) run command: npm audit


    Step 3

    (Add wyze-node as an external third party node)

    Edit your node red setting.js file (Linux located in cd ~/.node-red ). Set functionGlobalContext To look like this...

    functionGlobalContext: {
    // os:require('os'),
    // jfive:require("johnny-five"),
    // j5board:require("johnny-five").Board({repl:false}),
    Wyze:require("wyze-node")
    },



    Step 4 (This isn't needed, but this is how I stored username/password in the flow)
    install https://flows.nodered.org/node/node-red-contrib-config

    Step 5
    create a virtual device On/Off in HS4

    Step 6
    import the flow...

    Code:
    [{"id":"8c2cdc64.8a845","type":"tab","label":"Flow 3","disabled":false,"info":""},{"id":"5ae3a92e.c81058","type":"function","z":"8c2cdc64.8a845","name":"","func":"let Wyze = global.get('Wyze')\n\nlet wyze = new Wyze(flow.get(\"wyzeOptions\"))\n\nlet device = await wyze.getDeviceByName('CameraName')\nlet result = await wyze.turnOff(device)\n\nmsg.payload={\n    \"command\":\"off\",\n    \"value\":result.code,\n};\n\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"const options = {\n  username: env.get(\"username\"),\n  password: env.get(\"password\")\n}\n","finalize":"","x":680,"y":220,"wires":[["1ad9241e.01a9e4"]]},{"id":"63519b88.ac392c","type":"inject","z":"8c2cdc64.8a845","name":"","props":[],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","x":510,"y":220,"wires":[["5ae3a92e.c81058"]]},{"id":"71e19088.93fec8","type":"inject","z":"8c2cdc64.8a845","name":"","props":[],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","x":510,"y":320,"wires":[["2567ac77.8e9114"]]},{"id":"487e814b.26e358","type":"function","z":"8c2cdc64.8a845","name":"","func":"let Wyze = global.get('Wyze')\n\nlet wyze = new Wyze(flow.get(\"wyzeOptions\"))\nlet devices = await wyze.getDeviceList()\n\nmsg.payload={\n    \"devices\":devices\n};\n\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","x":680,"y":120,"wires":[["21ee2da1.8868ea"]]},{"id":"21ee2da1.8868ea","type":"debug","z":"8c2cdc64.8a845","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":870,"y":120,"wires":[]},{"id":"6e445cef.b82644","type":"inject","z":"8c2cdc64.8a845","name":"","props":[],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","x":510,"y":120,"wires":[["487e814b.26e358"]]},{"id":"1ad9241e.01a9e4","type":"debug","z":"8c2cdc64.8a845","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":870,"y":220,"wires":[]},{"id":"3231f270.9a096e","type":"debug","z":"8c2cdc64.8a845","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":870,"y":320,"wires":[]},{"id":"2567ac77.8e9114","type":"function","z":"8c2cdc64.8a845","name":"","func":"\nlet Wyze = global.get('Wyze')\n\nlet wyze = new Wyze(flow.get(\"wyzeOptions\"))\n\nlet device = await wyze.getDeviceByName('CameraName')\nlet result = await wyze.turnOn(device)\n\nmsg.payload={\n    \"command\":\"on\",\n    \"value\":result.code,\n};\n\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"const options = {\n  username: env.get(\"username\"),\n  password: env.get(\"password\")\n}\n","finalize":"","x":680,"y":320,"wires":[["3231f270.9a096e"]]},{"id":"bc4153d.f60703","type":"comment","z":"8c2cdc64.8a845","name":"Turn Off Wyze device by Name","info":"","x":530,"y":180,"wires":[]},{"id":"a32002a8.87ddf","type":"comment","z":"8c2cdc64.8a845","name":"Turn On Wyze device by Name","info":"","x":530,"y":280,"wires":[]},{"id":"b3e989c4.20f878","type":"comment","z":"8c2cdc64.8a845","name":"Get Wyze devices","info":"","x":490,"y":80,"wires":[]},{"id":"475a5c60.54541c","type":"inject","z":"8c2cdc64.8a845","name":"","props":[],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","x":510,"y":420,"wires":[["5963f4d0.b7f534"]]},{"id":"f119d969.9f62a","type":"debug","z":"8c2cdc64.8a845","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":870,"y":420,"wires":[]},{"id":"5963f4d0.b7f534","type":"function","z":"8c2cdc64.8a845","name":"","func":"let Wyze = global.get('Wyze')\n\nlet wyze = new Wyze(flow.get(\"wyzeOptions\"))\n\nlet device = await wyze.getDeviceByName('CameraName')\nlet deviceState = await wyze.getDeviceState(device)\n\nmsg.payload={\n    \"state\":deviceState,\n};\n\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"const options = {\n  username: env.get(\"username\"),\n  password: env.get(\"password\")\n}\n","finalize":"","x":680,"y":420,"wires":[["f119d969.9f62a"]]},{"id":"25bb421a.b788ee","type":"comment","z":"8c2cdc64.8a845","name":"Get Wyze device state","info":"","x":500,"y":380,"wires":[]},{"id":"a48a9442.8f24f","type":"hs-device","z":"8c2cdc64.8a845","name":"  WyzeCam1 Control","device":0,"server":"","feature":0,"reportonstartup":false,"x":190,"y":220,"wires":[["7c6ab079.c9308"]]},{"id":"7c6ab079.c9308","type":"switch","z":"8c2cdc64.8a845","name":"","property":"payload.value","propertyType":"msg","rules":[{"t":"eq","v":"0","vt":"num"},{"t":"eq","v":"100","vt":"num"}],"checkall":"true","repair":false,"outputs":2,"x":350,"y":220,"wires":[["5ae3a92e.c81058"],["2567ac77.8e9114"]]},{"id":"b7fadddf.5af94","type":"config","z":"8c2cdc64.8a845","name":"wyzeConfig","properties":[{"p":"wyzeOptions","pt":"flow","to":"{ \"username\": \"username@email.com\",   \"password\": \"yourPassword\" }","tot":"json"}],"active":true,"x":250,"y":120,"wires":[]}]
    Click image for larger version  Name:	wyzeHS4NodeRed.png Views:	0 Size:	48.3 KB ID:	1452440
    Step 7
    -Setup your HS4 device node to the virtual device
    -Setup your Wyze username and password in the Config node json
    -Deploy
    -Do a test of "get wyze devices" to get your devices names
    -Edit the functions to have your wyze device name
    -Deploy

    Step 8
    Test it using injects and/or HS4 device on/off control
Working...
X