Announcement

Collapse
No announcement yet.

CT 100 and HS3Touch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    CT 100 and HS3Touch

    I have 6 CT100 tstats running on HS3; I remotely monitor them via HS3Touch. I am not running any tstat plug in. My tstat devices all report fine as devices, but I am curious about the "Climate" tab. When I open it, I see a familiar tstat display, but only one of my six with no indication of which one it is. How is this supposed to display and how do I make mine do so?
    HS4Pro on Windows 10
    One install with 2 Ethernet Z-nets
    2nd install with 1 Ethernet Z-net
    300 devices, 250 events, 8 scripts
    6 CT-100 tstats
    Serial IT-100 interface to DSC Panel with 8 wired zones
    18 Fortrezz water sensors & two valve controls

    #2
    Interested, too..... I only have 2 of 4 showing up.
    HomeSeer Version: HS3 Pro Edition 3.0.0.500
    Operating System: Microsoft Windows 10 Pro - Work Station

    Enabled Plug-Ins:
    2.1.0.119: AmbientWeather | 3.0.21.0: BLLock | 2.0.24.0: BLUPS | 1.3.6.0: Device History | 3.0.0.56: EasyTrigger | 3.1.0.7: MeiHarmonyHub | 3.0.6681.34300: UltraCID3 | 3.0.6644.26753: UltraLog3 | 3.0.6554.33094: UltraMon3 | 3.0.0.91: weatherXML | 3.0.1.245: Z-Wave | 3.0.51: HS Touch Designer | 3.0.0.40 Z-Seer+

    Comment


      #3
      Solved

      Make sure your root device isn't checked off as hidden on its configuration page or it won't show in HSTouch. All but one of mine were hidden, unchecked them and they appeared.
      HS4Pro on Windows 10
      One install with 2 Ethernet Z-nets
      2nd install with 1 Ethernet Z-net
      300 devices, 250 events, 8 scripts
      6 CT-100 tstats
      Serial IT-100 interface to DSC Panel with 8 wired zones
      18 Fortrezz water sensors & two valve controls

      Comment


        #4
        None are hidden, but I noticed they don't appear properly "grouped" together. I have no idea why....
        HomeSeer Version: HS3 Pro Edition 3.0.0.500
        Operating System: Microsoft Windows 10 Pro - Work Station

        Enabled Plug-Ins:
        2.1.0.119: AmbientWeather | 3.0.21.0: BLLock | 2.0.24.0: BLUPS | 1.3.6.0: Device History | 3.0.0.56: EasyTrigger | 3.1.0.7: MeiHarmonyHub | 3.0.6681.34300: UltraCID3 | 3.0.6644.26753: UltraLog3 | 3.0.6554.33094: UltraMon3 | 3.0.0.91: weatherXML | 3.0.1.245: Z-Wave | 3.0.51: HS Touch Designer | 3.0.0.40 Z-Seer+

        Comment


          #5
          Originally posted by ewkearns View Post
          None are hidden, but I noticed they don't appear properly "grouped" together. I have no idea why....
          I would do a re-scan on them.

          Cheers
          Al
          HS 3.0.0.548: 1990 Devices 1172 Events
          Z-Wave 3.0.1.262: 126 Nodes on one Z-Net

          Comment


            #6
            Originally posted by sparkman View Post
            I would do a re-scan on them.
            I'm a little afraid to do that. The last time I re-scanned them I got a ton of duplicate children. These CT-100s have never played well with HS3....
            HomeSeer Version: HS3 Pro Edition 3.0.0.500
            Operating System: Microsoft Windows 10 Pro - Work Station

            Enabled Plug-Ins:
            2.1.0.119: AmbientWeather | 3.0.21.0: BLLock | 2.0.24.0: BLUPS | 1.3.6.0: Device History | 3.0.0.56: EasyTrigger | 3.1.0.7: MeiHarmonyHub | 3.0.6681.34300: UltraCID3 | 3.0.6644.26753: UltraLog3 | 3.0.6554.33094: UltraMon3 | 3.0.0.91: weatherXML | 3.0.1.245: Z-Wave | 3.0.51: HS Touch Designer | 3.0.0.40 Z-Seer+

            Comment

            Working...
            X