teslaSeer, plugin using tesla motors "API"

[salvesen]

I tried to restart TeslaSeer and re-enter my credentials. Now I'm getting this message in the plug-ins panel

WARNING: Failed getting InterfaceStatus from teslaSeer - the interface was not found in the list of active interfaces, the list may need to be refreshed.

Do you have any funny characters in your password or something like that?

Please enable debug and send me the logs when it fails.

[risquare]

Thanks for the prompt response. It fixed by itself after disabling and re-enabling TeslaSeer.

[cheeryfool]

I was wondering if it would be possible to add the Sentry Mode Enable|Disable command. I'd like to automate setting this when away from home. I see it referenced on other projects on GitHub already

Thanks in advance

[risquare]

I have two questions, please answer.

1. Teslaseer created duplicates of all TeslaSeer devices (ask me for a screenshot if needed). What to do? Delete them all and waiting for TeslaSeer to recreate? Delete half ? Which half lower id numbers or higher ID numbers?
2. Too many device types used by the plug-in are clogging my Device Types list and making it hard to use. I'm willing to spend the time and manually change it for each of the TeslaSeer devices. Will the plug-in going to restore them back ?

[cheeryfool]

I have two questions, please answer.

1. Teslaseer created duplicates of all TeslaSeer devices (ask me for a screenshot if needed). What to do? Delete them all and waiting for TeslaSeer to recreate? Delete half ? Which half lower id numbers or higher ID numbers?
2. Too many device types used by the plug-in are clogging my Device Types list and making it hard to use. I'm willing to spend the time and manually change it for each of the TeslaSeer devices. Will the plug-in going to restore them back ?

For question 1, are you using the latest version? There was a bug previously (now fixed) that duplicated all the devices if you disabled and re-enabled the plugin. Once I updated to the latest plugin version and recreated all my devices from scratch all has been good,

[risquare]

I'm using version 1.0.0.1 and the HS3 plug-in page says that update is N/A

[salvesen]

I'm using version 1.0.0.1 and the HS3 plug-in page says that update is N/A

Hello,

sorry for the late response. There is no auto update for this plugin. So Download the latest from first page and then install everything again. Also, delete your devices from previous versions.

This is a bug that is fixed. Sorry for the mess

[cheeryfool]

I was wondering if it would be possible to add the Sentry Mode Enable|Disable command. I'd like to automate setting this when away from home. I see it referenced on other projects on GitHub already

Thanks in advance

Any thoughts on this? Thanks.

[salvesen]

Any thoughts on this? Thanks.

Hello,

I will add it soon. I used to have an AP2 car(no sentry mode) but just got my model 3 so now I can test it out.

[cheeryfool]

Hello,

I will add it soon. I used to have an AP2 car(no sentry mode) but just got my model 3 so now I can test it out.

Thank you and congratulations!!!! I’ve had mine since July. Best car I have ever driven.

[ldplusse]

My TeslaSeer does not seems to be able to control anything in the car. It can read the values, but not control them.

it seems that i am on the newest version.
What to do?


Current Date/Time: 05-04-2019 22:04:54
HomeSeer Version: HS3 Pro Edition 3.0.0.500
Operating System: Microsoft Windows 10 Pro - Work Station
System Uptime: 14 Days 2 Hours 1 Minute 13 Seconds
IP Address: 192.168.1.10
Number of Devices: 579
Number of Events: 251
Available Threads: 400
HSTouch Enabled: True
Event Threads: 0
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed: Windows Defender
In Virtual Machine: No MFG: intel corporation
Enabled Plug-Ins
2.0.59.0: BLBackup
2.0.28.0: BLOccupied
3.0.0.29: Chromecast
1.3.6.0: Device History
3.7.2.0: Harmony Hub
3.9.610.5: HSBuddy
2.0.3.0: JowiHue
3.0.1.13: Kodi
0.0.0.45: Pushover 3P
3.1.0.28: Sonos
1.0.0.3: teslaSeer
3.0.6908.18500: UltraNetatmo3
3.0.6175.15900: UltraNetatmoWelcome3
3.0.1.252: Z-Wave

[cheeryfool]

My TeslaSeer does not seems to be able to control anything in the car. It can read the values, but not control them.

it seems that i am on the newest version.
What to do?


Current Date/Time: 05-04-2019 22:04:54
HomeSeer Version: HS3 Pro Edition 3.0.0.500
Operating System: Microsoft Windows 10 Pro - Work Station
System Uptime: 14 Days 2 Hours 1 Minute 13 Seconds
IP Address: 192.168.1.10
Number of Devices: 579
Number of Events: 251
Available Threads: 400
HSTouch Enabled: True
Event Threads: 0
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed: Windows Defender
In Virtual Machine: No MFG: intel corporation
Enabled Plug-Ins
2.0.59.0: BLBackup
2.0.28.0: BLOccupied
3.0.0.29: Chromecast
1.3.6.0: Device History
3.7.2.0: Harmony Hub
3.9.610.5: HSBuddy
2.0.3.0: JowiHue
3.0.1.13: Kodi
0.0.0.45: Pushover 3P
3.1.0.28: Sonos
1.0.0.3: teslaSeer
3.0.6908.18500: UltraNetatmo3
3.0.6175.15900: UltraNetatmoWelcome3
3.0.1.252: Z-Wave

Are you starting with the Wake command and then waiting for a bit before trying to control anything else?

[gregoryx]

Is there some indication of the last successful poll / update somewhere? Other than scrolling through the "Last Change" stamps of the devices? Maybe add a device for last update time / date?

[salvesen]

Hello and sorry for little response in this thread lately. I have been quite busy. I will do some updates to teslaSeer going forward. I see there are some issues and some wishes. I will start tonight.

[salvesen]

Added e new version with some bugfix and sentry mode.