Announcement

Collapse
No announcement yet.

teslaSeer, plugin using tesla motors "API"

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • chrisgla
    replied
    Started having errors with plugin 1.0.0.3, have tried re-authenticating and I get a successful
    “Response from getAccessToken”
    followed by successful
    “Response from getVehicleList: {"response":” which has name, VIN, etc

    After this I get a load of failures:-
    Jan-07 22:26:00 error Error: The remote server returned an error: (408) Request Timeout.
    Jan-07 22:25:09 tesla debug Response from chargeState: failed to get response, contact plugin developer
    Jan-07 22:25:09 error Error: The remote server returned an error: (408) Request Timeout.
    Jan-07 22:25:08 tesla debug Response from climateSettings: failed to get response, contact plugin developer
    Jan-07 22:25:08 error Error: The remote server returned an error: (408) Request Timeout.
    Jan-07 22:25:08 tesla debug Response from driveState: failed to get response, contact plugin developer
    Jan-07 22:25:08 error Error: The remote server returned an error: (408) Request Timeout.
    Jan-07 22:25:08 tesla debug Response from guiSettings: failed to get response, contact plugin developer
    Jan-07 22:25:08 error Error: The remote server returned an error: (408) Request Timeout.
    Jan-07 22:25:08 tesla debug Response from vehicleState: failed to get response, contact plugin developer
    Jan-07 22:25:08 error Error: The remote server returned an error: (408) Request Timeout
    Is anyone else having the same issue? Wondering if there’s been an API change, etc?

    Leave a comment:


  • michaeldecharon
    replied
    Since i've updated your plugin to version 1.0.0.3pB i receive the following message in the log view:
    dec-30 20:18:07 teslaseerdebug
    dec-30 20:18:04 teslaseerdebug
    dec-30 20:17:04 teslaseerdebug
    dec-30 20:17:01 teslaseerdebug
    dec-30 20:16:06 teslaseerdebug
    dec-30 20:16:03 teslaseerdebug
    dec-30 20:15:05 teslaseerdebug
    dec-30 20:15:02 teslaseerdebug
    dec-30 20:14:05 teslaseerdebug
    dec-30 20:14:03 teslaseerdebug
    dec-30 20:13:04 teslaseerdebug
    dec-30 20:13:02 teslaseerdebug
    dec-30 20:12:04 teslaseerdebug
    dec-30 20:12:02 teslaseerdebug
    dec-30 20:11:04 teslaseerdebug
    dec-30 20:11:02 teslaseerdebug
    dec-30 20:10:06 teslaseerdebug
    dec-30 20:10:03 teslaseerdebug
    dec-30 20:09:05 teslaseerdebug
    dec-30 20:09:02 teslaseerdebug
    dec-30 20:08:05 teslaseerdebug
    dec-30 20:08:03 teslaseerdebug
    dec-30 20:07:03 teslaseerdebug
    dec-30 20:07:01 teslaseerdebug
    dec-30 20:06:06 teslaseerdebug
    dec-30 20:06:03 teslaseerdebug

    I've turned off the debug logging, any idea how i can solve this?

    Leave a comment:


  • ramshaklez
    replied
    If I set the polling interval (on the plugin setup screen) to 0:0:0, does that disable automatic polling? Or, is it best to use the "Enable Polling" device and turn polling on/off from there? I've had bad experiences with 3rd party applications polling my car and it causing problems with the car going to sleep. I'd rather turn polling on, get the information I need, then turn polling off.

    Leave a comment:


  • chrisgla
    replied
    Thanks for a great PlugIn!

    Any suggestions on how to configure sleep?

    TeslaFi seems to split polling into a "vehicle poll" and a "data poll" to avoid waking the vehicle:-
    With this approach, in TeslaSeer I think if the temperature/ shift state isn't updated in the vehicle poll I can count down, stop polling and go to sleep like TeslaFi?


    I'm unsure on how to find out if vehicle wakes? Does Teslaseer do the passive "vehicle" poll like TeslaFi- and if so how do I determine the vehicle state? TeslaFi shows connection state as "online" but I don't see this data point in TeslaSeer- or a way to just update it without polling vehicle for "data poll".

    Thanks!

    Leave a comment:


  • ViperJD
    replied
    So, from what I can find out, the "Tesla Vehicles" is a different plugin. I like the "Tesla Vehicles" so far, but would love to know if anyone has tried both and if they find one better then the other and why?

    Leave a comment:


  • ViperJD
    replied
    Is this PlugIn the same as "Tesla Vehicles"? If not, how do they compare? If so, can Homeseer put in a different category then "Robotics"? Maybe make one for Automobile?

    Leave a comment:


  • cheeryfool
    replied
    Originally posted by salvesen View Post
    Added e new version with some bugfix and sentry mode.
    Awesome, thank you. Will try it out.

    Leave a comment:


  • salvesen
    replied
    Added e new version with some bugfix and sentry mode.

    Leave a comment:


  • salvesen
    replied
    Hello and sorry for little response in this thread lately. I have been quite busy. I will do some updates to teslaSeer going forward. I see there are some issues and some wishes. I will start tonight.

    Leave a comment:


  • gregoryx
    replied
    Is there some indication of the last successful poll / update somewhere? Other than scrolling through the "Last Change" stamps of the devices? Maybe add a device for last update time / date?

    Leave a comment:


  • cheeryfool
    replied
    Originally posted by ldplusse View Post
    My TeslaSeer does not seems to be able to control anything in the car. It can read the values, but not control them.

    it seems that i am on the newest version.
    What to do?


    Current Date/Time: 05-04-2019 22:04:54
    HomeSeer Version: HS3 Pro Edition 3.0.0.500
    Operating System: Microsoft Windows 10 Pro - Work Station
    System Uptime: 14 Days 2 Hours 1 Minute 13 Seconds
    IP Address: 192.168.1.10
    Number of Devices: 579
    Number of Events: 251
    Available Threads: 400
    HSTouch Enabled: True
    Event Threads: 0
    Event Trigger Eval Queue: 0
    Event Trigger Priority Eval Queue: 0
    Device Exec Queue: 0
    HSTouch Event Queue: 0
    Email Send Queue: 0
    Anti Virus Installed: Windows Defender
    In Virtual Machine: No MFG: intel corporation
    Enabled Plug-Ins
    2.0.59.0: BLBackup
    2.0.28.0: BLOccupied
    3.0.0.29: Chromecast
    1.3.6.0: Device History
    3.7.2.0: Harmony Hub
    3.9.610.5: HSBuddy
    2.0.3.0: JowiHue
    3.0.1.13: Kodi
    0.0.0.45: Pushover 3P
    3.1.0.28: Sonos
    1.0.0.3: teslaSeer
    3.0.6908.18500: UltraNetatmo3
    3.0.6175.15900: UltraNetatmoWelcome3
    3.0.1.252: Z-Wave
    Are you starting with the Wake command and then waiting for a bit before trying to control anything else?

    Leave a comment:


  • ldplusse
    replied
    My TeslaSeer does not seems to be able to control anything in the car. It can read the values, but not control them.

    it seems that i am on the newest version.
    What to do?


    Current Date/Time: 05-04-2019 22:04:54
    HomeSeer Version: HS3 Pro Edition 3.0.0.500
    Operating System: Microsoft Windows 10 Pro - Work Station
    System Uptime: 14 Days 2 Hours 1 Minute 13 Seconds
    IP Address: 192.168.1.10
    Number of Devices: 579
    Number of Events: 251
    Available Threads: 400
    HSTouch Enabled: True
    Event Threads: 0
    Event Trigger Eval Queue: 0
    Event Trigger Priority Eval Queue: 0
    Device Exec Queue: 0
    HSTouch Event Queue: 0
    Email Send Queue: 0
    Anti Virus Installed: Windows Defender
    In Virtual Machine: No MFG: intel corporation
    Enabled Plug-Ins
    2.0.59.0: BLBackup
    2.0.28.0: BLOccupied
    3.0.0.29: Chromecast
    1.3.6.0: Device History
    3.7.2.0: Harmony Hub
    3.9.610.5: HSBuddy
    2.0.3.0: JowiHue
    3.0.1.13: Kodi
    0.0.0.45: Pushover 3P
    3.1.0.28: Sonos
    1.0.0.3: teslaSeer
    3.0.6908.18500: UltraNetatmo3
    3.0.6175.15900: UltraNetatmoWelcome3
    3.0.1.252: Z-Wave

    Leave a comment:


  • cheeryfool
    replied
    Originally posted by salvesen View Post


    Hello,

    I will add it soon. I used to have an AP2 car(no sentry mode) but just got my model 3 so now I can test it out.
    Thank you and congratulations!!!! I’ve had mine since July. Best car I have ever driven.

    Leave a comment:


  • salvesen
    replied
    Originally posted by cheeryfool View Post

    Any thoughts on this? Thanks.

    Hello,

    I will add it soon. I used to have an AP2 car(no sentry mode) but just got my model 3 so now I can test it out.

    Leave a comment:


  • cheeryfool
    replied
    Originally posted by cheeryfool View Post
    I was wondering if it would be possible to add the Sentry Mode Enable|Disable command. I'd like to automate setting this when away from home. I see it referenced on other projects on GitHub already

    Thanks in advance
    Any thoughts on this? Thanks.

    Leave a comment:

Working...
X