Ecowitt Listener Application

[jim@beersman.com]

Groot, just to confirm after setting the Customized Weather Services option on the EcoWitt device it's now working for you?

[Groot]

I have created a Windows application that can capture the Weather Data sent by the Ecowitt GW1000 device running firmware 1.5.0 or later. The application can also be used by owners of the Ecowitt HP2551-C Weather station. It has been tested with the US 915mhz version as well as European 868mhz devices. The Ecowitt GW1000 not only works with Ecowitt Weather Stations but also some Ambient Weather devices. My own weather stations is the Ambient Weather WS1002-wifi array

The application receives the data sent under the Customized Weather Services option on the Ecowitt WS View application and converts the data into an MQTT message and sends to your MQTT Broker. Using one of the MQTT plugins you can Subscribe and bring this information into Homeseer or any other HomeAutomation application that supports MQTT.

The application supports the same Units of Measure as the Ecowitt WS View configuration application. You can also have the application Calculate Dew Point, Feels Like Temperature, Illuminance and Relative Barometric Pressure based on Altitude. You can also adjust the UTC time sent by the GW1000 device to the timezone of the PC that it's running on. You can run the application on the same PC as Homeseer or another PC that has access to the Network that the GW1000 and your MQTT Broker is running on.

The program can be downloaded from https://www.dropbox.com/s/7qkq5fv9j9...0_1_7.zip?dl=1

I have downloaded your program, but I'm having some trouble setting it up.
Seems that the program don't get any information.
It's just blank.
Any ideas?

[hillsh]

Hi Jim: I have used your app on my machine. I'm working on writing a listening app for my ESP32 device, the M5StickC. I think it would be very helpful to me if I could get a look at your source code - is there any chance you could make it available on dropbox?

[brientim]

Great work.

[jim@beersman.com]

I have created a Windows application that can capture the Weather Data sent by the Ecowitt GW1000 device running firmware 1.5.0 or later. The application can also be used by owners of the Ecowitt HP2551-C Weather station. It has been tested with the US 915mhz version as well as European 868mhz devices. The Ecowitt GW1000 not only works with Ecowitt Weather Stations but also some Ambient Weather devices. My own weather stations is the Ambient Weather WS1002-wifi array

The application receives the data sent under the Customized Weather Services option on the Ecowitt WS View application and converts the data into an MQTT message and sends to your MQTT Broker. Using one of the MQTT plugins you can Subscribe and bring this information into Homeseer or any other HomeAutomation application that supports MQTT.

The application supports the same Units of Measure as the Ecowitt WS View configuration application. You can also have the application Calculate Dew Point, Feels Like Temperature, Illuminance and Relative Barometric Pressure based on Altitude. You can also adjust the UTC time sent by the GW1000 device to the timezone of the PC that it's running on. You can run the application on the same PC as Homeseer or another PC that has access to the Network that the GW1000 and your MQTT Broker is running on.

Latest Version 1.0.1.11 (Sept. 16, 2020)

• Fixed value of *batt devices that are reported as voltage
• Added the option to calculate Air Quality Index (AQI) if you have a PM 2.5 Air Quality Sensor

Manual: Version 1.0.1.11

Version 10.0.1.10

• Supports binding to specific Network card in PC
• Added support for Lightning Sensor
• List of Devices received from GW1000