Announcement

Collapse
No announcement yet.

Omni unit locked off network

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Omni unit locked off network

    Wondering if anyone can help? A few days ago I was locked out of my Omni panel using PC access. I cannot connect to my network at all with the panel. It says connection refused with code 10061. I then tried the mobile app for Omni and that’s not connecting either. The panel is broke or locked for some reason and I don’t have a clue how to fix it. Thanks

    #2
    If you have a Keypad connection to the panel then check on the IP of the panel that way. Have you changed your network or router settings?

    Do you have the installer code? You will need this to access configuration stuff on the Omni Keypad.

    1 - Main menu ==> setup (#9) * here utilize your installer code

    Controller IP Address

    The controller’s local network IP address is used to identify the OmniPro II controller on the network.

    To view and assign thecontroller’s local network IP address, from the Set Up menu, press the 6 (MISC) key. Using the down arrow key (↓), scroll to the following menu item: IP ADDRESS 192.168.0.101 ¦ The format of the IP address is a 32-bit numeric address written as four numbers separated by periods. An IP address has two components, the network address, and the host address. The first two numbers (e.g. 192.168) represent the Class B network address and must be the same as the first two numbers of your local network. The second two numbers (e.g. 0.101) identify a particular host on the local network and may be assigned at random as long as each device on the local network has a unique address. Each number can be 0 to 255. Enter the 1, 2, or 3 digit number followed by the “#” key to move to the next number. After the 4th number has been entered, press the “#” key to store the IP address.


    Click image for larger version  Name:	OmniKeypad.jpg Views:	0 Size:	46.3 KB ID:	1350790

    OR

    If you are familiar with PC Access you can connect to the panel via a serial cable and configure the IP using the PCA Installer software.
    - Pete

    Auto mator
    Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb- Mono 6.12.X - HSTouch on Intel tabletop tablets
    Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.12.X
    HS4 Pro - V4.1.11.0 - Ubuntu 20.01/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb - Mono
    6.10.0.104
    HS4 Lite -

    X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

    Comment


      #3
      Thanks for the help. Nothing had changed it just stopped working so I decided to change the panel IP and reconnect. It worked so I’m happy to say I’m back on line. I just don’t understand how this happened. Thanks again

      Comment


        #4
        Maybe a duplicate IP on your Home LAN. Note that the OmniPro panel doesn't do DHCP.
        - Pete

        Auto mator
        Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb- Mono 6.12.X - HSTouch on Intel tabletop tablets
        Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.12.X
        HS4 Pro - V4.1.11.0 - Ubuntu 20.01/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb - Mono
        6.10.0.104
        HS4 Lite -

        X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

        Comment


          #5
          Agree with Pete. I'd suggest you reserve the new IP in your router config to prevent it being handed out to another device.
          -Wade

          Comment


            #6
            thanks for the help !

            Comment

            Working...
            X