Greetings,
Due to issues with some devices and plugins I decided to start all over again with my HS3 instal.
My Zwave stick is an aeotec gen5 and I did an import and rescan with a fresh HS3 install. Most of my devices were imported correctly, some I had to exclude and include again ( mainly battery operated devices).
I have 4 Fibaro universal sensors , with temperature sensors and reed switches installed.
Before on my previous HS3 install all sensors wore working 100% OK
The seemed to import correctly on the new install , but today I noticed the inputs do not register all.
-on 2 Universal sensors both work fine ( also the temperature sensor works correctly).
-on 2 other universal sensors the inputs are not working correctly ( temperature sensors are updating normally).
Both of them only 1 binary input is working.
- there was no physicall change , so there should be no wiring issues ( but I checked this as well).
-I did a rescan , everytime all 5 child devices are detected. , but still 1 binary sensor input is working.
-excluded and included again : the same issue.
-did a factory reset of the sensor and included again : same issue.
-looked on this forum , found this thread: https://forums.homeseer.com/forum/ho...2?postcount=13
-changed the parameters , but no luck.
Anyone has an idea how to troubleshoot?
-They were working fine when they were included on my vera homeautomation systems.
-2 months ago I included them on my HS system : they were working fine from the beginning.
-yesterday I imported and scanned them on a fresh install of HS 3 : only 1 binary input is working.
- I would expect after a factory reset and include they should work again..... but no.
very wierd.
Thanks,
Cor
Current Date/Time: 2/12/2020 8:27:16 PM
HomeSeer Version: HS3 Standard Edition 3.0.0.548
Operating System: Microsoft Windows 10 Pro - Work Station
System Uptime: 0 Days 11 Hours 42 Minutes 27 Seconds
IP Address: 192.168.168.5
Number of Devices: 345
Number of Events: 151
Available Threads: 1023
HSTouch Enabled: True
Event Threads: 1
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed: Windows Defender
In Virtual Machine: No MFG: asustek computer inc.
Enabled Plug-Ins
0.0.0.47: Pushover 3P
3.0.1.252: Z-Wave
Due to issues with some devices and plugins I decided to start all over again with my HS3 instal.
My Zwave stick is an aeotec gen5 and I did an import and rescan with a fresh HS3 install. Most of my devices were imported correctly, some I had to exclude and include again ( mainly battery operated devices).
I have 4 Fibaro universal sensors , with temperature sensors and reed switches installed.
Before on my previous HS3 install all sensors wore working 100% OK
The seemed to import correctly on the new install , but today I noticed the inputs do not register all.
-on 2 Universal sensors both work fine ( also the temperature sensor works correctly).
-on 2 other universal sensors the inputs are not working correctly ( temperature sensors are updating normally).
Both of them only 1 binary input is working.
- there was no physicall change , so there should be no wiring issues ( but I checked this as well).
-I did a rescan , everytime all 5 child devices are detected. , but still 1 binary sensor input is working.
-excluded and included again : the same issue.
-did a factory reset of the sensor and included again : same issue.
-looked on this forum , found this thread: https://forums.homeseer.com/forum/ho...2?postcount=13
-changed the parameters , but no luck.
Anyone has an idea how to troubleshoot?
-They were working fine when they were included on my vera homeautomation systems.
-2 months ago I included them on my HS system : they were working fine from the beginning.
-yesterday I imported and scanned them on a fresh install of HS 3 : only 1 binary input is working.
- I would expect after a factory reset and include they should work again..... but no.
very wierd.
Thanks,
Cor
Current Date/Time: 2/12/2020 8:27:16 PM
HomeSeer Version: HS3 Standard Edition 3.0.0.548
Operating System: Microsoft Windows 10 Pro - Work Station
System Uptime: 0 Days 11 Hours 42 Minutes 27 Seconds
IP Address: 192.168.168.5
Number of Devices: 345
Number of Events: 151
Available Threads: 1023
HSTouch Enabled: True
Event Threads: 1
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed: Windows Defender
In Virtual Machine: No MFG: asustek computer inc.
Enabled Plug-Ins
0.0.0.47: Pushover 3P
3.0.1.252: Z-Wave
Comment