Yale Dead Bolt Types

[themlruts]

All of my locks look like the bottom one in my picture. I have 1 lock Node 37 in the picture that looks different.
Is this because of the lock itself or the zwave module in the lock?

Thanks
Mike


Garage lock

Manufacturer	Assa Abloy (ID=0x129)
Product Type	0x8002			Product ID	0x600
Z-Wave Plus Node Type	ZWP Node			Z-Wave Plus Role Type	(Unknown)
Supports Status	Yes			Library Type	Enhanced Routing Slave
Z-Wave Lib Version	4.24 (ZDK 6.51.7)			Application Version	1.78
Hardware Version	255			Firmware 0 Version	43
Associated Device	Locks Garage G - Entry Lock - Battery Cmd Class: Battery Cmd Class Version: 1			Associated Device	Locks Garage G - Entry Lock - Lock Logging Cmd Class: Door Lock Logging Cmd Class Version: 1
Associated Device	Locks Garage G - Entry Lock Cmd Class: Door Lock Cmd Class Version: 2			Associated Device	Locks Garage G - Entry Lock - Access Notification Cmd Class: Notification Cmd Class Version: 4
Associated Device	Locks Garage G - Entry Lock - Power Notification Cmd Class: Notification Cmd Class Version: 4			Firmware Update Command Class Version	3

Node37

Manufacturer	Assa Abloy (ID=0x129)
Product Type	0x2			Product ID	0xAA00
Node Type	GENERIC TYPE ENTRY CONTROL			Supports Status	Yes
Library Type	Enhanced Routing Slave			Z-Wave Lib Version	3.34 (ZDK 4.53)
Application Version	25.32			Associated Device	Node 37 Z-Wave FP - Entry Lock - Battery Cmd Class: Battery Cmd Class Version: 1
Associated Device	Node 37 Z-Wave FP - Entry Lock - Logging Cmd Class: Door Lock Logging Cmd Class Version: 1			Associated Device	Node 37 Z-Wave FP - Entry Lock Cmd Class: Door Lock Cmd Class Version: 1
Associated Device	Node 37 Z-Wave FP - Entry Lock - Notification Cmd Class: Notification Cmd Class Version: 1

[838Joel]

I had the same problem before, I think it's related to the zwave module.

Sent from my Pixel 3 XL using Tapatalk

[838Joel]

Is the lock are the same model?

Sent from my Pixel 3 XL using Tapatalk

[TC1]

Two different lock models, and the first one looks newer (Z-wave +) and the second one looks older.

[838Joel]

Two different lock models, and the first one looks newer (Z-wave +) and the second one looks older.

Then it might be related to the lock!

Sent from my Pixel 3 XL using Tapatalk

[themlruts]

zwave or zwave plus is just the module that plugs in to the lock. I am wondering if i replace it with a zwave plus module it will be the same as the others

[Vit]

I thought about doing this. Unfortunately, according to Yale tech. support, you cannot put a Z-Wave Plus module in an older lock because of some, unspecified, hardware differences.

Well, to be precise, this applies to YRD220. If you lock is different, you may have better luck.

[838Joel]

I had older locks and could not changed the module.
So I changed my YRD220's for YRD256's.

Sent from my Pixel 3 XL using Tapatalk