I have an I7-7700 16gb ram machine that I run Blue Iris on. How resource intensive is Homeseer software. Anyone successfully running in this configuration?
Announcement
Collapse
No announcement yet.
Anyone Running Homeseer on a Windows machine that also runs Blue Iris?
Collapse
X
-
HS isn't the problem. BI might be. It depends on how many cameras you have and how you record video. Use Direct To Disc and it will save a lot of CPU time. Use Ctrl-Shift-Esc and it Windows will show you the task manager. You might have to click on a button "detail". Then you will see how much CPU time and memory each task uses. HS should be pretty low. BI probably will be very high. BI has a bunch of lectures incl. recordings how to optimize settings.
- Likes 1
Comment
-
Here, on a Win 10 Pro server with AMD A4-6300 and 8GM ram, I am running HS3, BI4 (3 cams with motion detection), and Plex. All work OK however it does sometimes get a bit slow. I've had uptimes of over 100 days. I'd like to upgrade to an Intel I9 based server sometime in the future but no particular rush.
- Likes 1
Comment
-
Originally posted by logbuilder View PostHere, on a Win 10 Pro server with AMD A4-6300 and 8GM ram, I am running HS3, BI4 (3 cams with motion detection), and Plex. All work OK however it does sometimes get a bit slow. I've had uptimes of over 100 days. I'd like to upgrade to an Intel I9 based server sometime in the future but no particular rush.
- Likes 1
Comment
-
Originally posted by ServiceXp View Post
BI5 has a lot of refinement as it pertains to CPU usage, you may want to take a look at upgrading.
CPU utilization significantly dropped from almost pegged to ~15% especially after using second streams.
DSteiNeuro
HS3Pro
MSI Cubi Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2201 Mhz, 2 Core(s), 4 Logical Processor(s) 16GB DDRl RAM
Enabled Plug-Ins
BLRussound, BLSpeech, HSTouch Server, JowiHue, MyQ, Nest, Rain8, Squeezebox, Ultra1Wire3, UltraGCIR3, Vista Alarm, X10,Z-Wave
- Likes 1
Comment
-
@DSteilNeuro that is interesting. Did you change any settings? I know it makes a huge difference when you use direct to disc. Maybe the upgrade to BI5 changed that? Or did any other video record settings change as part of the upgrade? It seems a bit drastic that you go from almost 100% to 15%. I am very much interested in that as my BI4 uses like 35% (and almost 5GB of RAM which is due to my configuration) on a fairly powerful CPU running 10 cameras and I will be adding a couple cameras soon.
Comment
-
Originally posted by mulu View Post@DSteilNeuro that is interesting. Did you change any settings? I know it makes a huge difference when you use direct to disc. Maybe the upgrade to BI5 changed that? Or did any other video record settings change as part of the upgrade? It seems a bit drastic that you go from almost 100% to 15%. I am very much interested in that as my BI4 uses like 35% (and almost 5GB of RAM which is due to my configuration) on a fairly powerful CPU running 10 cameras and I will be adding a couple cameras soon.
I don't run blue-iris currently but will be soon so I've been reading up on it lots. Apparently sub-streams is a game changer.
Comment
-
Originally posted by mulu View PostSubstreams are mostly for remote viewing. It is a lower resolution. On your PC you still want to record the main stream. So what the PC is concerned it is still the same.
https://ipcamtalk.com/wiki/optimizin...s-s-cpu-usage/
https://ipcamtalk.com/wiki/sub-stream-guide/
Edit: you are still using direct to disk recording of the main stream so that cpu usage doesn't change but it is also minimal. Blue iris isn't doing any reencoding when recording the main stream, it's basically just taking the video stream and saving it to disk which isn't that intensive of a process.
If you were asking it to reencode that stream, or even decode it to see what is going on, now that gets demanding.
Basically any cpu intensive tasks that blue iris does with the video is using the substream, since it is a lower resolution it reduces cpu usage dramatically. So reencoding multiple streams for remote viewing, or decoding and processing the image to detect motion are both done using a lower resolution and reduces CPU usage.
- Likes 1
Comment
-
Well, that was kind of my point in my original post. Use direct to disc which will significantly reduce CPU time. Maybe BI also uses substreams for overviews but it is my understanding that the direct to disc is the most important part to reduce CPU time. At least it made a huge difference for me. But back to the original question, the point is that HS uses very little CPU time (in my case usually less than 1%) so as long as BI and other tasks don't take up almost all of the CPU time then it should be just fine running both on the same computer.
Comment
Comment