Announcement

Collapse
No announcement yet.

Help with new TV and wattage fluctuations

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pcgirl65
    replied
    I thought about that except then the lights won't come back on for a number of seconds that I have in the event. Because the wattage fluctuates so much. I will look at the log and see if I can pin it down to how many seconds between fluctuations.

    Leave a comment:


  • AshaiRey
    replied
    I solve this in my event like
    If wattage is below X for at least yY seconds then...

    If the event system dont allow this then use counters like
    If wattage is set below Y then set counter to 0 seconds - start counter
    (might need to set a No retrigger option for some time)

    In another event
    If counter becomes Y seconds then ....

    Leave a comment:


  • Eman
    replied
    Originally posted by pcgirl65 View Post
    I was just asking in that forum if it works for HS4 and new Sony TV's. Thanks, I will give it a go.
    Check on the "Tip" above as well.


    Plus this if you are on HS4 : https://flows.nodered.org/node/node-red-contrib-oled (Or https://flows.nodered.org/node/node-red-contrib-bravia) And control with the HS Nodes : https://github.com/HomeSeer/node-red...-device-update

    Click image for larger version

Name:	ioBroker Nodes.png
Views:	65
Size:	178.3 KB
ID:	1510116







    Life is Good!




    Eman.

    Leave a comment:


  • pcgirl65
    replied
    I was just asking in that forum if it works for HS4 and new Sony TV's. Thanks, I will give it a go.

    Leave a comment:


  • Eman
    replied
    Test the plug-in for 30 days...If you find it interesting then...

    Click image for larger version  Name:	Sony.png Views:	0 Size:	59.4 KB ID:	1510100



    If you need help with it... spud



    Tip : If connected to the Network, you could also set by Online/Offline/... There is another state I think is Waiting ...

    Also go deep into the setting and check on the power saving setting you may have Hey! Google turned On and waiting for commands


    Eman.

    Leave a comment:


  • pcgirl65
    started a topic Help with new TV and wattage fluctuations

    Help with new TV and wattage fluctuations

    So, I use the aeon plug to turn my TV room lights back on to full bright white when I turn off the TV. I use the Wattage to determine when the TV is off. However, I just purchased a new Sony OLED TV and now the wattage seems to always be fluctuating. Even when I have turned the TV off. Plus when the TV is on, its' wattage is up and down. So now when I turn the TV off, my lights don't do what I want them to because the wattage doesn't fall below the state that I have tried to figure it to be to work. I can't seem to zero in on a good wattage because it fluctuates too much. Any suggestions?
Working...
X