So one of my water sensors has spontaneously throwing an error that it received data from Node 39/2 but there is no corresponding device. (39 is the z-wave id of this particular sensor). For fun I tried re-scanning it and got the following results:

Code:
Time
From
Type
Message


1/4/2022 12:38:17 PM
Legacy-Plugin
Z-Wave Error
(2) Sensor Multilevel Report for type Air_Temperature received, but the corresponding device Node ID cannot be found.(2) Node/Instance=39/2

1/4/2022 12:38:17 PM
Legacy-Plugin
Z-Wave Error
(2) Sensor Multilevel Report for type Air_Temperature received, but the corresponding device Node ID cannot be found.(2) Node/Instance=39/2

1/4/2022 12:36:15 PM
Legacy-Plugin
Z-Wave
Device: Basement Office Office Overhead Light kW Hours Set to 145.535 (145.535 kW Hours)

1/4/2022 12:34:25 PM
Legacy-Plugin
Z-Wave
Device: Main Floor Kitchen Flood Sensor Kitchen Temperature 2 Set to 30.6 (C)

1/4/2022 12:34:22 PM
Legacy-Plugin
Z-Wave
5 out of 5 Child devices of node 39 were created successfully.

1/4/2022 12:34:21 PM
Legacy-Plugin
Z-Wave
Setting wake-up interval for device Basement Furnace Room Flood Sensor 1 Root to 12 hours and 0 minutes.

1/4/2022 12:34:21 PM
Legacy-Plugin
Z-Wave
Programming device Basement Furnace Room Flood Sensor 1 Root (39) to send wake-up notifications to HomeSeer.

1/4/2022 12:34:21 PM
Legacy-Plugin
Z-Wave
Setting wake-up interval for device Basement Furnace Room Flood Sensor 1 Root to 12 hours and 0 minutes.

1/4/2022 12:34:20 PM
Legacy-Plugin
Z-Wave
Getting association information for Basement Furnace Room Flood Sensor 1 Root

1/4/2022 12:34:20 PM
Legacy-Plugin
Z-Wave
Assigning return route from node 1 to Basement Furnace Room Flood Sensor 1 Root

1/4/2022 12:34:20 PM
Legacy-Plugin
Z-Wave
Zoe: Adding association for Z-Wave device Basement Furnace Room Flood Sensor 1 Root (Node 39, Group 2, Endpoint 2) to HomeSeer

1/4/2022 12:34:19 PM
Legacy-Plugin
Z-Wave
Assigning return route from node 1 to Basement Furnace Room Flood Sensor 1 Root

1/4/2022 12:34:19 PM
Legacy-Plugin
Z-Wave
Zoe: Adding association for Z-Wave device Basement Furnace Room Flood Sensor 1 Root (Node 39, Group 1, Endpoint 1) to HomeSeer

1/4/2022 12:34:19 PM
Legacy-Plugin
Z-Wave
All associations for node 39 have been retrieved successfully, it supports associations on these groups: 1, 2, 3.

1/4/2022 12:34:19 PM
Legacy-Plugin
Z-Wave
Node 39 Association Group 3 can have 1 associations, and currently has 1

1/4/2022 12:34:19 PM
Legacy-Plugin
Z-Wave
Node 39 Association Group 2 can have 5 associations, and currently has 1

1/4/2022 12:34:19 PM
Legacy-Plugin
Z-Wave
Node 39 Association Group 1 can have 5 associations, and currently has 1

1/4/2022 12:34:19 PM
Legacy-Plugin
Z-Wave
Getting association information for node 39

1/4/2022 12:34:18 PM
Legacy-Plugin
Z-Wave
Alarm Sensor Node 39 Supports 2 Alarm Types: GENERAL_PURPOSE_ALARM WATER_LEAK_ALARM

1/4/2022 12:34:18 PM
Legacy-Plugin
Z-Wave Error
(2) Sensor Multilevel Report for type Air_Temperature received, but the corresponding device Node ID cannot be found.(2) Node/Instance=39/2

1/4/2022 12:34:18 PM
Legacy-Plugin
Z-Wave Error
(2) Sensor Multilevel Report for type Air_Temperature received, but the corresponding device Node ID cannot be found.(2) Node/Instance=39/2

1/4/2022 12:34:18 PM
Legacy-Plugin
Z-Wave Warning
Node 39, EndPoint=2 Multilevel Sensor Report was not received (B) - the child device will NOT be configured properly.

1/4/2022 12:34:18 PM
Legacy-Plugin
Z-Wave
Processing Information for Node 39 Multi-CHANNEL Command Class of SENSOR_MULTILEVEL_V8, Endpoint 2

1/4/2022 12:34:18 PM
Legacy-Plugin
Z-Wave
Processing Information for Node 39 Multi-CHANNEL Command Class of SENSOR_BINARY, Endpoint 1

1/4/2022 12:34:18 PM
Legacy-Plugin
Z-Wave
Node 39 is Z-Wave version: Lib: 3.67 App: 25.25

1/4/2022 12:34:17 PM
Legacy-Plugin
Z-Wave
Node: 39 Supports Class(es): SENSOR_BINARY, SENSOR_ALARM, MULTI_CHANNEL_V3, ASSOCIATION, MULTI_INSTANCE_ASSOCIATION, MANUFACTURER_SPECIFIC_V2, CONFIGURATION, VERSION, BATTERY, WAKE_UP

1/4/2022 12:34:17 PM
Legacy-Plugin
Z-Wave
Syncing Z-Wave nodes with device list...

1/4/2022 12:34:17 PM
Legacy-Plugin
Z-Wave
Found 61 Z-Wave nodes

1/4/2022 12:34:17 PM
Legacy-Plugin
Z-Wave
Getting Z-Wave node list for network DB46E657...
The rescan took place, but did say that for "Endpoint 2" a configuration was not received and will not be configured properly. I guess I could remove and re-add the device, but I really don't want to if I don't need to, so I don't have to go back and fix all my events that touch it, too. Any ideas?

regards,

Paul