It got a little cool here last evening (about -10F) and I received a low temp alert from an empty house. I have the temp set to 50 and the low temp set to 45. When looking through the log to see how low the temp dropped I noticed the operating state of the T6 went to operating state 4. When I go in to create events I see the below for operating states.
I know 0 is off and 1 is heat. The assumption would be 3 would be cool and 4 would be Aux or EH but it doesn't make sense. With the heat set at 50 you can see below the temp drops to 49 and the heat turns on (state 1) it drops some more because the T6 is in the middle of the house and it starts moving cold air around. You can see it starts to climb then it hits a state 4 before a state 0 (off). I was thinking maybe this was the timer between heat off and fan off but you can see the fan turns off before state 4 and then 1 second later it goes to state 0. Thanks everyone!
12/18/2022 2:08:43 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 0
12/18/2022 2:03:45 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 4
12/18/2022 2:03:44 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Fan State Set to Fan State 0
12/18/2022 2:03:43 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 50 (F)
12/18/2022 1:57:08 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 49 (F)
12/18/2022 1:51:49 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 48 (F)
12/18/2022 1:39:09 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 47 (F)
12/18/2022 1:06:00 AM
HomeSeer
Energy DB Info
All energy database compacting routines completed.
12/18/2022 1:06:00 AM
HomeSeer
Energy DB Info
No Records. Vacuuming database to condense.
12/18/2022 1:06:00 AM
HomeSeer
Energy DB Info
Energy database compaction initiated.
12/18/2022 1:02:55 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 48 (F)
12/18/2022 12:39:08 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 1
12/18/2022 12:39:07 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Fan State Set to Fan State 1
12/18/2022 12:39:06 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 49 (F)
12/18/2022 12:23:34 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 0
12/18/2022 12:18:36 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 4
12/18/2022 12:18:35 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Fan State Set to Fan State 0
12/18/2022 12:18:34 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 50 (F)
12/18/2022 12:12:29 AM
I know 0 is off and 1 is heat. The assumption would be 3 would be cool and 4 would be Aux or EH but it doesn't make sense. With the heat set at 50 you can see below the temp drops to 49 and the heat turns on (state 1) it drops some more because the T6 is in the middle of the house and it starts moving cold air around. You can see it starts to climb then it hits a state 4 before a state 0 (off). I was thinking maybe this was the timer between heat off and fan off but you can see the fan turns off before state 4 and then 1 second later it goes to state 0. Thanks everyone!
12/18/2022 2:08:43 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 0
12/18/2022 2:03:45 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 4
12/18/2022 2:03:44 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Fan State Set to Fan State 0
12/18/2022 2:03:43 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 50 (F)
12/18/2022 1:57:08 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 49 (F)
12/18/2022 1:51:49 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 48 (F)
12/18/2022 1:39:09 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 47 (F)
12/18/2022 1:06:00 AM
HomeSeer
Energy DB Info
All energy database compacting routines completed.
12/18/2022 1:06:00 AM
HomeSeer
Energy DB Info
No Records. Vacuuming database to condense.
12/18/2022 1:06:00 AM
HomeSeer
Energy DB Info
Energy database compaction initiated.
12/18/2022 1:02:55 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 48 (F)
12/18/2022 12:39:08 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 1
12/18/2022 12:39:07 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Fan State Set to Fan State 1
12/18/2022 12:39:06 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 49 (F)
12/18/2022 12:23:34 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 0
12/18/2022 12:18:36 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Operating State Set to Operating State 4
12/18/2022 12:18:35 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Fan State Set to Fan State 0
12/18/2022 12:18:34 AM
Legacy-Plugin
Z-Wave
Device: Upstairs Living Thermostat Temperature Set to 50 (F)
12/18/2022 12:12:29 AM
Comment