Announcement

Collapse
No announcement yet.

TIVO & HSP Caller ID Display

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TIVO & HSP Caller ID Display

    Hello All, I have a Directv TIVO (samsung sir-s4040r) I would like to display cid info from my way2 call HS device on tivo. I have my samsung set up on the network and can control it with tivowebplus project v1.0. (did some hacks & installed larger hard drive)

    Is there a script or plug-in out there for HS to do this ? Also what is needed in the tivo unit ? What is the best way to do this with HS?
    HS2 Environment
    Zotac 1.83 GHz Quadcore
    HomeSeer Way2Call
    Netiom-Xap board
    opnode 1-wire 1.2.7
    Plug-In's
    WeatherXML 1.0.0.32
    Pwr Link USB 1.0.0.13
    mcsTemp V6.2.0.14
    mcsXap V3.0.0.0/3.0.0.20
    IM Connector 4.87.2.5
    Sip Connector 2.56.2.4
    RFXCOM 15.0.0.22
    Odroid X2
    Asterisk 11.5.1
    FreePBX 2.11.0.42
    WebMin 1.720
    Xap Switchboard by Mi4

    There is no place Like 127.0.0.1

  • #2
    There are many things done with the TIVO display using xAP. I dont have one so I cannot be of much help. Here is one link http://wiki.xapautomation.org/tiki-i...ge=CallerIdOsd and from there others can be navigated. http://wiki.xapautomation.org/tiki-index.php?page=TiVo is another.

    Comment


    • #3
      Thanks Michael, I will check it out. If there are any other suggestions let me know


      Thanks
      HS2 Environment
      Zotac 1.83 GHz Quadcore
      HomeSeer Way2Call
      Netiom-Xap board
      opnode 1-wire 1.2.7
      Plug-In's
      WeatherXML 1.0.0.32
      Pwr Link USB 1.0.0.13
      mcsTemp V6.2.0.14
      mcsXap V3.0.0.0/3.0.0.20
      IM Connector 4.87.2.5
      Sip Connector 2.56.2.4
      RFXCOM 15.0.0.22
      Odroid X2
      Asterisk 11.5.1
      FreePBX 2.11.0.42
      WebMin 1.720
      Xap Switchboard by Mi4

      There is no place Like 127.0.0.1

      Comment


      • #4
        I use YAC (http://sunflowerhead.com/software/yac/). There is a small listener client which loads on your Tivo (I have a Series 1 with TurboNet Card) and a server which runs on your HS machine. A short script which triggers on the "CallerID available" event and calls the command line yactextsend.exe will send the CID info to your Tivo. I also use this to send CID info to other computers on the network besides the Tivo.

        Comment


        • #5
          Thanks , I think mine is a series 2 , so not sure if it will work on mine.
          HS2 Environment
          Zotac 1.83 GHz Quadcore
          HomeSeer Way2Call
          Netiom-Xap board
          opnode 1-wire 1.2.7
          Plug-In's
          WeatherXML 1.0.0.32
          Pwr Link USB 1.0.0.13
          mcsTemp V6.2.0.14
          mcsXap V3.0.0.0/3.0.0.20
          IM Connector 4.87.2.5
          Sip Connector 2.56.2.4
          RFXCOM 15.0.0.22
          Odroid X2
          Asterisk 11.5.1
          FreePBX 2.11.0.42
          WebMin 1.720
          Xap Switchboard by Mi4

          There is no place Like 127.0.0.1

          Comment

          Working...
          X