I am using weather display in the stationless mode to get outside temp, humidity, barometric pressure, wind speed, etc. from a downloaded METAR file and I have a temp08 with an onboard temp and humidity sensor that I would like to read into weather display for the indoor temp and humidity. I was wondering how this is done. I have found the one-wire setup stuff in the weather display software, but doesn't seem to relate to what I have with the temp08 unit? Any help on this issue would be much appreciated and thanks much in advance !!!!!!!!
-
-
Rick.
I have a similar, although not identical setup. I'm using Virtual Weather Station and a Temp08.
I have a slightly modified version of the Homeseer script that comes with the Temp08 to get information into Homeseer. I have another script (Thanks JonOO) that takes the weather from the BBC (which I believe is just metar data from my local airfield). A third script takes the data from homeseer (i.e. BBC and Temp08 data) and generates a CSV file that I import into virtual weather station via the stationless mode.
This means that I get all my temperature sensors into VWS etc and simultaneously the data is in homeseer. It's been installed for several months and works a treat.
Something to be aware of in my setup is that stationless mode only updates every minute therefore the readings are not quite real time...
Phill -
I don't think you can unfortunately. Weather Displays software is designed to take its one-wire data from a DS9097U or the Newer USB interface and read a one-wire bus directly. Then sensors on the Temp08 board are not accessible in this way.
I have a similar setup as yours in that I have a the older Temp05 unit. I use the Temp05 unit for readings around the house and then I have a separate one-wire bus going to Weather Display. I added a separate humidity sensor from AAG to my Weather Display one-wire bus into order to get that data into the WD software.
Now if you want to combine both sets of data into HomeSeer thats a piece of cake.
-Rupp
What hair color do they put on the driver's licenses of bald men?-Rupp
sigpicComment
Comment