Announcement

Collapse
No announcement yet.

retrigger in xx seconds.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    retrigger in xx seconds.

    I'm trying to get the function not to retrigger an event in xx seconds working. I've tried various values from 30 seconds to 60 seconds yet the event still seems to always retrigger as the minutes roll over and the seconds = 00.

    I'm using homeseer version 1.7.7

    Any ideas ?

    #2
    Do you have the options set to reference to hour or trigger only once per hour?

    I set up an event to run every 9 seconds, but set the option not to re-trigger to 10 seconds. It worked as it should - every 9 seconds it tried to run, but if it had been only 9 seconds since it last ran, it would not run again. The next time (18 seconds) was greater than 10, so it ran.

    6/17/2004 9:38:33 AM~!~Test~!~Running....
    6/17/2004 9:38:33 AM~!~Event Trigger~!~Recurring Trigger (Test Retrigger)
    6/17/2004 9:38:51 AM~!~Test~!~Running....
    6/17/2004 9:38:51 AM~!~Event Trigger~!~Recurring Trigger (Test Retrigger)
    6/17/2004 9:39:09 AM~!~Test~!~Running....
    6/17/2004 9:39:09 AM~!~Event Trigger~!~Recurring Trigger (Test Retrigger)
    6/17/2004 9:39:27 AM~!~Test~!~Running....
    6/17/2004 9:39:27 AM~!~Event Trigger~!~Recurring Trigger (Test Retrigger)
    6/17/2004 9:39:45 AM~!~Test~!~Running....
    6/17/2004 9:39:45 AM~!~Event Trigger~!~Recurring Trigger (Test Retrigger)
    6/17/2004 9:40:03 AM~!~Test~!~Running....
    6/17/2004 9:40:03 AM~!~Event Trigger~!~Recurring Trigger (Test Retrigger)
    Regards,

    Rick Tinker (a.k.a. "Tink")

    Comment


      #3
      Tink,

      Where is the option to reference to hour or trigger only once per hour ?

      Comment


        #4
        A picture is worth a thousand words:
        Attached Files
        -Rupp
        sigpic

        Comment


          #5
          Thanks Rupp.

          So what I did was copy Tink, I create a new event called Test XXX, set it to "type reccuring" every 9 seconds, put a 10 second retrigger everything worked as Tink explained. So I moved on to change from a recurring to be conditional and this is where it seems to go wrong.

          Take a look at the trace below. I stood in front of the motion sensor and waved my arms (at 19 seconds past) then I sat back and did nothing for a minute. Yet it seems to have done a conditional trigger as the time rolled over the minute 00, 2 triggers for the price of 1.

          17/06/2004 20:23:19~!~Info~!~Exec command: Landing Motion Detected On dim: 0 extra: 0
          17/06/2004 20:23:19~!~X10 Received~!~L1 (Landing Motion Detected) L On
          17/06/2004 20:23:19~!~Event Trigger~!~X10 Trigger/Conditions (Test XXX)
          17/06/2004 20:24:00~!~Event Trigger~!~Condition Trigger (Test XXX)


          Got any ideas ???

          Comment


            #6
            I am fresh out of ideas - perhaps post a screen shot of everything in the event as Rupp did for the trigger.
            Regards,

            Rick Tinker (a.k.a. "Tink")

            Comment


              #7
              This is my first image posting, so hopefully it will work.

              [img]c:\temp\pic.jpg[/img]

              Comment

              Working...
              X