Announcement

Collapse
No announcement yet.

PLC:eventraw=05

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    PLC:eventraw=05

    Can someone out here please tell me what gives. I just got a new SDM and I have unplugged my entire house and my smarthome / homeseer will no longer work. I try to program a new device and all I get is is this god damn error which no one on this planet can answer: PLC:eventraw=05

    ui:IsResponding=
    uifinished:IsResponding=
    downloadTimer started
    timerActivate enabled
    UI:ConnectedAndReady
    SDMM=active,1.01.138.308,10/25/2008 1:05:50 PM,responded,0E.D7.C3,2.13,xdevices=True
    starttime=00:09
    ui:SetImage=0xFB25,0xFE
    PLC:setimage=OK
    uifinished:SetImage=0xFB25,0xFE
    ui:sendeventraw=0x41
    PLC:sendeventraw=True
    uifinished:sendeventraw=0x41
    PLC:eventraw=41
    ui:sendeventraw=0x45
    PLC:sendeventraw=True
    uifinished:sendeventraw=0x45
    PLC:eventraw=45
    ui:addid=07.45.1E,1,S
    PLC:addid=True,07.45.1E
    uifinished:addid=07.45.1E,1,S
    ui:addid=07.45.1E,1,M
    PLC:addid=True,07.45.1E
    uifinished:addid=07.45.1E,1,M
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:07:49 PM:nakmsg(07.45.1E)
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:07:55 PM:nakmsg(07.45.1E)
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:07:58 PM:nakmsg(07.45.1E)
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=04
    PLC:receiveinsteonraw=04 07 45 1E 0E D7 C3 26 10 00
    10/25/2008 1:08:00 PM:ackmsg=07 45 1E 0E D7 C3 26 10 00
    ui:addid=07.45.1E,1,S
    PLC:addid=True,07.45.1E
    uifinished:addid=07.45.1E,1,S
    ui:addid=07.45.1E,1,M
    PLC:addid=True,07.45.1E
    uifinished:addid=07.45.1E,1,M
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:08:29 PM:nakmsg(07.45.1E)
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:08:33 PM:nakmsg(07.45.1E)
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:08:36 PM:nakmsg(07.45.1E)
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:08:39 PM:nakmsg(07.45.1E)
    ui:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    si:00 00 00 07 45 1E 0A 10 00
    PLC:sendinsteonraw=True
    uifinished:SendInsteonRaw=00 00 00 07 45 1E 0A 10 00
    PLC:eventraw=05
    10/25/2008 1:08:42 PM:nakmsg(07.45.1E)
    Last edited by sifu128; October 25, 2008, 12:10 PM.

    #2
    Eventraw=05 is that the message it sent out to the device didnt not reply. where do you have your PLC plugged into?. It cant be on a power strip that has filtering, or surge protection it totally isolates the device. Also try moving your access points closer to the PLC.

    Comment


      #3
      Thanks for the reply. I have the pcl plugged in to a socket next to my computer however I have a ups plugged in on the other side of the room and I believe that ups might be on the same line. I am going to get another 10 amp filter and plug the ups in to that and see if it does the trick.

      Thanks

      Comment

      Working...
      X