Announcement

Collapse
No announcement yet.

Siren and Smoke Detector (flex-control)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Siren and Smoke Detector (flex-control)

    I use Homeseer HSPRO 2.4.0.25
    I bought Siren SE812-1 and Smoke detector SF812-1 (www.flex-control.dk).

    The instruction says that The Siren and Smoke Detector supports Command Classes including:


    *COMMAND_CLASS_ASSOCIATION V2
    *COMMAND_CLASS_BATTERY
    *COMMAND_CLASS_BASIC
    *COMMAND_CLASS_VERSION
    *COMMAND_CLASS_MANUFACTURER-SPECIFIC
    *COMMAND_CLASS_SENSOR_ALARM (Smoke detector)
    *COMMAND_CLASS_SWITCH_BINARY (Siren)


    This is what came up in the logs when I imported devices:

    SE812-1 (flex-control)
    PHP Code:
    27.06.2010 22:09:19  Z-Wave - ********** Adding Z-Wave Device with Node ID of 8 Type GENERIC_TYPE_SWITCH_BINARY=10H **********
    27.06.2010 22:09:19  Z-Wave - **********
    27.06.2010 22:09:19  Z-Wave Contacting node 8 to get supported features
    27.06.2010 22
    :09:20  Z-Wave Attempting to get manufacturer ID from device 8...
    27.06.2010 22:09:21  Z-Wave Z-Wave manufacturer ID96=60H (Everspring), Type12=CHID1=1H
    27.06.2010 22
    :09:21  Z-Wave DeviceZ-Wave Z-Wave Interface  (Node 8supports class(es): COMMAND_CLASS_SWITCH_BINARYCOMMAND_CLASS_VERSIONCOMMAND_CLASS_BATTERYCOMMAND_CLASS_ASSOCIATIONCOMMAND_CLASS_MANUFACTURER_SPECIFIC
    27.06.2010 22
    :09:23  Z-Wave Z-Wave device 8 versionLib2.64 App1.3
    27.06.2010 22
    :09:25  Z-Wave Device supports 1 groups for associations
    27.06.2010 22
    :09:26  Z-Wave - ********** Done with Z-Wave Device with Node ID of 8 **********
    27.06.2010 22:09:29  Device Update DeviceZ-Wave Z-Wave Interface Child 8 Battery Battery Level 90%
    27.06.2010 22:09:29  Device Update DeviceZ-Wave Z-Wave Interface Child 8 Switch Binary Status set to OFF 


    SF812-1 (flex-control)

    PHP Code:
    27.06.2010 22:17:36  Z-Wave - ********** Adding Z-Wave Device with Node ID of 9 Type GENERIC_TYPE_SENSOR_ALARM=A1H **********
    27.06.2010 22:17:36  Z-Wave - **********
    27.06.2010 22:17:36  Z-Wave Contacting node 9 to get supported features
    27.06.2010 22
    :17:36  Z-Wave Attempting to get manufacturer ID from device 9...
    27.06.2010 22:17:37  Z-Wave Z-Wave manufacturer ID96=60H (Everspring), Type13=DHID1=1H
    27.06.2010 22
    :17:37  Z-Wave DeviceZ-Wave Z-Wave Interface  (Node 9supports class(es): COMMAND_CLASS_MANUFACTURER_SPECIFICCOMMAND_CLASS_VERSIONCOMMAND_CLASS_ASSOCIATIONCOMMAND_CLASS_BATTERYCOMMAND_CLASS_SENSOR_ALARM
    27.06.2010 22
    :17:37  Z-Wave Z-Wave device 9 versionLib2.64 App1.4
    27.06.2010 22
    :17:38  Z-Wave Device supports 1 groups for associations
    27.06.2010 22
    :17:38  Z-Wave Alarm Sensor Node 9 Supports 1 Alarm TypesSMOKE_ALARM 
    27.06.2010 22
    :17:38  Z-Wave - ********** Done with Z-Wave Device with Node ID of 9 ********** 


    The problem is that I can not send a command to activate the Siren, and when clicked on tamper switch Siren begins to sound, but in the logs appears:

    PHP Code:
    Warning In Set Level for device Z-Wave Z-Wave Interface Root Device 8 which does not match command type Alarm, and its actual device could not be located cannot continue. 


    When the smoke detector is triggered, HomeSeer does not respond.
    What I did wrong. If there is currently no support for these devices is very much like to see it.

    Thanks in advance
    Attached Files
    Last edited by PSL74; June 28, 2010, 08:58 AM.

    #2
    Are you running the lastest beta release of HomeSeer?
    💁‍♂️ Support & Customer Service 🙋‍♂️ Sales Questions 🛒 Shop HomeSeer Products

    Comment


      #3
      Originally posted by Rupp View Post
      Are you running the lastest beta release of HomeSeer?
      I'm using HSPRO 2.4.0.25
      Z-STICK-S2-EURO with the latest firmware, if it is important!

      Comment


        #4
        Upgrade to .56, .25 does not support the siren.

        Comment


          #5
          Originally posted by bartdesign View Post
          Upgrade to .56, .25 does not support the siren.
          After upgrading to .56 in the logs appears supporting COMMAND_CLASS_ASOCIATION_V2, I managed to get to work Smoke Detector, by pressing link key and while it stay awake add homeseer in asociation.Thanks

          But with the siren all the same thing, I still cannot activate the siren, turning the switch binary to ON. How to make the Siren work?
          Last edited by PSL74; June 29, 2010, 10:05 AM.

          Comment

          Working...
          X