Announcement

Collapse
No announcement yet.

X10 interference from Z-wave lamp devices

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    X10 interference from Z-wave lamp devices

    I have a multitude of X10 products in my house and I am adding Z-wave products. I have found that some of my Z-wave lamp modules are creating havoc with X10 signalling, such that I have had to interpose a filter (XPPF) between the Z-wave device and the electrical outlet. I was wondering if anyone else has had this problem.

    #2
    I've only seen one other report of this mentioned. What level of noise is being reported by your signal meter?
    -Rupp
    sigpic

    Comment


      #3
      Sorry, but I don't have a signal meter.

      Comment


        #4
        What Z-Wave Lamp modules seem to be causing the problem?

        Comment


          #5
          In addition to which Z-Wave module(s) make & model, does the offending module cause this problem when it is dimmed and/or at full power?

          Do other module(s) of the same make & model also cause the same problem?

          Comment


            #6
            ^^ as BobT asked that would be helpfull too...

            i too am on a slew of x10 and will not go away from it... i have a box of about 75 z-wave modules to go in... and just havent bothered yet....
            all of mine are the intermatic ones... lamp, appliance, outlets
            HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

            HS - HS3 Pro Edition 3.0.0.435

            Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

            Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

            Comment


              #7
              Signal sucker, not noise

              Here is what I found -
              http://board.homeseer.com/showthread.php?t=147418

              Barry

              Comment

              Working...
              X