Announcement

Collapse
No announcement yet.

Insteon Failing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Insteon Failing

    So I have had a stable network for years, about 10 insteon devices and a few left-over x10 devices. They have all worked flawlessly, until all of a sudden.

    Basically I added zwave, and coincidently or not, 8 of the 10 insteon devices dont work very well. The x10 devices are still fine though.

    Any thoughts to what may be going on here? I have been using a x10 coupler/repeater since the beginning which seems to connect the insteon just fine, do those go bad?
    HS Install Date: Feb. 16, 2007

    HS3 Pro, Z-Wave, Insteon, BLStat, HS Touch Server, MyQ

    WeatherXML, BLBackup, BLLAN, BLLock, Restart, CaddX, OpenSprinkler

    #2
    did you remove (or change location of) any Insteon devices?

    I found when I removed just 2 or 3 devices my Insteon network became less reliable - e.g. I had to change the circuit the PLM was on and still one of my rooms does not work. I have a phase bridge and my power is crystal clear clean too.

    Comment


      #3
      i did have an insteon switch die on me about the time this went bad.
      HS Install Date: Feb. 16, 2007

      HS3 Pro, Z-Wave, Insteon, BLStat, HS Touch Server, MyQ

      WeatherXML, BLBackup, BLLAN, BLLock, Restart, CaddX, OpenSprinkler

      Comment

      Working...
      X