Announcement

Collapse
No announcement yet.

HS did not run a scheduled event for UPB

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HS did not run a scheduled event for UPB

    If this is the correct place...

    I have a sunset event that does not run at all,

    I just changed the event to run at 9:00 PM .... it did not.

    completed it 4 minutes before 9:00 PM. I noticed there is no AM or PM on the event display, must be a Sunset designation.

    the event;

    Interior Evening 2 09:00 (0:52 hr/min after Sunset)
    WHEN
    Everyday
    Last ran: Yesterday 09:07

    Device Command: Interior Great Tall Lamp Dim to 50%
    Device Command: Interior Bay China Lamp Dim to 60%
    Speak and wait: running sunset event $time


    So 9:00 PM came and went with no event run....

    Logs has nothing in it. But event above says last ran ( it was the original event time 9:07 PM) yesterday.

    Event as you can see is set to Sunset with a 52 minute offset or 9:00 PM for my test. Something is screwy on this and I have a few other events that seem to not run.

    What caused HS to skip this event, how can I check and see if it is my configuration or an issue / bug?

    HS3 Standard Edition 3.0.0.258

    #2
    The absence of the 'PM' indication is puzzling. I've attached some events that are running without problem on my system. Do yours look different?
    Attached Files
    Mike____________________________________________________________ __________________
    HS3 Pro Edition 3.0.0.548, NUC i3

    HW: Stargate | NX8e | CAV6.6 | Squeezebox | PCS | WGL 800RF | RFXCOM | Vantage Pro | Green-Eye | Edgeport/8 | Way2Call | Ecobee3 | EtherRain | Ubiquiti

    Comment


      #3
      scheduled event no running.

      I see you have sunset with time 8:53 PM 30 hr / min

      I do not have that notation, just

      Interior Evening 2 09:00 (0:52 hr/min after Sunset)
      WHEN
      Everyday
      Last ran: Yesterday 09:07

      NO AM or PM and it does not show up in HS log either?

      HS Ver. Standard Edition 2.5.0.20
      HS3 Standard Edition 3.0.0.258

      Comment


        #4
        scheduled events

        I created a sunrise event again I notice it says time but no AM or PM notation.

        05:16 (0:47 hr/min before Sunrise)
        WHEN
        Everyday
        Last ran: Today 05:16

        The event ran though. And my sunsets did not.
        HS3 Standard Edition 3.0.0.258

        Comment


          #5
          Somethings screwy on your system. You should always have an am/pm designation. I also use a fair number of sunset events. Maybe a screen shot would give us a clue.
          Attached Files
          Marty
          ------
          XPpro SP3 /w HS Standard 2.5.0.80, HSTouch Server - 1.0.0.70, HSTouch Client 1.0.0.73 HSTouch Android - 1.0.0.2, HSTouch iPhone - 1.0.0.2
          Playing with HS3 a bit but it's just play at this point.

          Comment


            #6
            Is it possible that the OS settings on your computer specify 24 hour clock display?

            tenholde
            tenholde

            Comment


              #7
              excellent suggestion!
              Marty
              ------
              XPpro SP3 /w HS Standard 2.5.0.80, HSTouch Server - 1.0.0.70, HSTouch Client 1.0.0.73 HSTouch Android - 1.0.0.2, HSTouch iPhone - 1.0.0.2
              Playing with HS3 a bit but it's just play at this point.

              Comment


                #8
                HS does not know AM or PM that might be the cause.

                ok I can check .. where?

                I just received a sunset event at 8:29 in the AM- seems that might be a clue


                The event speaks and I heard - "Its sunset 8:29 AM"

                5/12/2011 08:29:00 - Event - Event Trigger "Sunset Lighting Ext. Int."

                windows xp ... checking control panel.
                HS3 Standard Edition 3.0.0.258

                Comment


                  #9
                  Does the header bar on the HS web page display the correct times for sunrise and sunset?
                  Attached Files
                  Mike____________________________________________________________ __________________
                  HS3 Pro Edition 3.0.0.548, NUC i3

                  HW: Stargate | NX8e | CAV6.6 | Squeezebox | PCS | WGL 800RF | RFXCOM | Vantage Pro | Green-Eye | Edgeport/8 | Way2Call | Ecobee3 | EtherRain | Ubiquiti

                  Comment


                    #10
                    looks ok from that view.

                    Yes

                    5/12/2011 01:47:10 Sunrise: 06:03 Sunset: 08:09

                    Can HS get backed up, no event showing as ran in HS log at event time. I just tried a 6 hour and 32 minutes before sunset and the event was never run and no logging. ( I saved it 2 minutes before 1:34 PM also)

                    here the last one- never ran at 1:43 on my test.

                    sunrise 1 01:43 (6:26 hr/min before Sunset)
                    WHEN
                    Everyday
                    Last ran: Today 05:16
                    HS3 Standard Edition 3.0.0.258

                    Comment


                      #11
                      I don't think it's your event that's not running but your system that's a little off. I still don't understand why you don't get the am/pm and if you don't get them HS won't know weather to run an event at 6:00am or 6:00pm.

                      Your header didn't show the am/pm either.

                      you had this

                      5/12/2011 01:47:10 Sunrise: 06:03 Sunset: 08:09

                      instead of this

                      5/12/2011 2:51:11 PM Sunrise: 5:50 AM Sunset: 8:06 PM

                      If you look at your log entries are those also missing the am/pm?
                      Marty
                      ------
                      XPpro SP3 /w HS Standard 2.5.0.80, HSTouch Server - 1.0.0.70, HSTouch Client 1.0.0.73 HSTouch Android - 1.0.0.2, HSTouch iPhone - 1.0.0.2
                      Playing with HS3 a bit but it's just play at this point.

                      Comment


                        #12
                        I see in another thread that you got it working. Glad to hear it.
                        Marty
                        ------
                        XPpro SP3 /w HS Standard 2.5.0.80, HSTouch Server - 1.0.0.70, HSTouch Client 1.0.0.73 HSTouch Android - 1.0.0.2, HSTouch iPhone - 1.0.0.2
                        Playing with HS3 a bit but it's just play at this point.

                        Comment


                          #13
                          Events not working is fixed.

                          Wow, what a chase.... but working.

                          It appeared to be only my UPB devices at first but nope that was not it.

                          If you see AM and PM missing from an event or web page. Check the settings_regional.XML file (in the config directory).

                          Removed and restarted and everything shows up and working fine.
                          HS3 Standard Edition 3.0.0.258

                          Comment

                          Working...
                          X